I cannot find "\clusterserviceaccount\Local Settings\Temp" directory on a failover cluster in Windows 2012R2. However, in the documentation ( support.sophos.com/.../KB-000033343 provided by Sophos, this directory should have an exclusion rule in Sophos…

We had 2 physical SEA appliances working in cluster. The master has failed, so the secondary inherited its IP address. I can log into that appliance GUI but each time I try to access "configuration" menu it is giving me "proxy timeout" error. Other…

Hello, I updated our UTM Cluster 1 1/2 weeks ago and kept one node reserved. Today I wanted to upgrade the second node which led to the following status after waiting quite some time: This does not look in sync. What needs to be done in order to have…

Hello, currently we have two SG330 nodes running in a high availability cluster. (active-passive) In one or two months we want to replace this nodes against two SG450. I have considered the following two replacement procedures: ******** Procedure…

We have Sophos UTM in an Active/Passive configuration. When i SSH to the master i should be able to connect to the slave with the command: ha_utils ssh. When i do this on the master (with root) it says the following: Connecting to slave 198.19.250…

Hello, we are running a SG 330 Cluster and I noticed that the devices does not show newer firmware. What is the reason for this and how can I fix it? What happens if I manually update the Cluster from 9.703-3 to 9.705? Will the process be the same as…

We currently run a pretty inefficient WAN design, with each site having its own internet connection, and a UTM at each, with IPSec VPNs running back to our central site. I am considering changing this to a different design - basically all our edge sites…

Hello, I have a couple of questions regarding configuring HA on UTM SG105: 1) Is it necessary that we connect the master and slave with a dedicated Ethernet cable on the HA port? Or can we connect them thorough a switch (in case we need to place the…

Hi all, On Friday I patched our Sophos UTM cluster to 9.506 and found that the cluster is broken unless the passive node is switched off. The VM's are on the same ESX host and I have checked that they both have Virtual mac setting set to 0. Has anyone…

Hi there, I've spent a little time testing the IPS offloading or load balancing behaviors while in a High Availability Cluster setup (Active/Active). I've setup two VM's on a ESXi 6.5 physical host. VMs have all the same networks, nics, ram, disks and…

Hi all, Couldn't find the information. Can one setup an Active/Active cluster with free home based licenses? Thanks, Cheers, -m-

I'm currently attempting to cluster two virtual UTM boxes. utm1 - 192.168.106.88 utm2 - 192.168.106.178 Setting up utm1 as node 1 I enter the shared secret on both boxes and set them both to use eth2. They both get 192.168.106.88 which is what…