• WLAN + WLAN Hotspot mit einem LAN-Anschluß

    Joey4x
    Joey4x
    Hallo Forengemeinschaft, habe folgendes Versucht, scheitere aber mit dem Internetzugriff über den Hotspot. SG115 Eth0 / LAN /192.168.10.20 WLAN0 bridged, WPA2 Enterprise mit Radiusauthentifizierung WLAN1, Hotspot Voucher, DHCP 192.168.100…
    • over 7 years ago
    • UTM Firewall
    • German Forum
  • WLAN thru Sophos to inner network

    Zerry Zakman
    Zerry Zakman
    I had Cisco 5505 for 8 years as my primary FW and now it was time to try something new. I just set up a new home UTM9 to for testing and this system the best ever. UTM9 has been installed on Qnap TS453pro as virtual machine and it works like a charm…
    • over 8 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • Correct way to setup a Staff and Guest connection?

    Dozer
    Dozer
    I have a SG125 with the latest software and updates etc. and 2 x AP15 access points on the LAN. First of all is there a document explaining the best practice for setting this up with a Guest WLAN? The "Staff" SSID is bridged to LAN AP and a "Guest…
    • over 8 years ago
    • UTM Firewall
    • Wireless Security
  • RE: RED 15w wird nicht erkannt als Access Point

     LH-User
    LH-User
    Ich hab deinen Beitrag bei dem gleichen Problem gefunden. Bei mir liegt es aber nicht an der Firewallregel (RED(Network) -> any -> RED(Address)). Diese habe ich hinzugefügt und sie hat nichts gebracht, daher habe ich sie wieder gelöscht. Fakt ist, dass…
    • over 8 years ago
    • UTM Firewall
    • German Forum
  • RE: RED15w Access Point not showing up as pending access point

    JanboNörskau
    JanboNörskau
    Hi Christian I've got exactly the same Issue/ Problem which you described. The only difference: If I delete the Red15w, connect it to another UTM (which changes the unlock code), delete it there and connect it to the first UTM again (which again changes…
    • over 8 years ago
    • UTM Firewall
    • Remote Ethernet Device (RED)
  • RED15w Access Point not showing up as pending access point

    MarkusSonderegger
    MarkusSonderegger
    Hi We use 8 RED15w for roadwarriors. We run the RED's in Standard/Unified mode, bridged to the LAN in the same IP Segment. Users behind the RED can connect to all resources in the LAN Segment, DHCP and DNS are working fine. But the only thing is…
    • over 8 years ago
    • UTM Firewall
    • Remote Ethernet Device (RED)
  • How can I connect a client via cable to a WLAN?

    MichaelHuke
    MichaelHuke
    Hello, I need hints to connect a client via cable to a WLAN. I have Sophos UTM 9.4. and 3 WLANs configured as seperate zone and broadcasted togehter by several APs. One of the WLANs is used for iPads. An OS-X Server to manage the iPads is also connectet…
    • over 8 years ago
    • UTM Firewall
    • Wireless Security
  • DHCPv6 funktioniert über WLAN nicht

    KaiBrümmer
    KaiBrümmer
    Hallo zusammen, ich habe in unserer UTM 5 DHCP-Server angelegt. 3x IPv6 (Internes LAN, internes WLAN, WLAN-Hotspot) , 2x IPv4 (internes WLAN, WLAN-Hotspot). Die IPv4 funktionieren problemlos. Auch der v6 für das interne LAN. Nur die v6 für die WLANs…
    • over 8 years ago
    • UTM Firewall
    • German Forum
  • Supercell Games not working in a WLAN Seperate Zone.

    christianelbl
    christianelbl
    Hi, Supercell Games not working in a WLAN Seperate Zone. ( IOS or Android , same Result ) No Application/Web Filter set in FW Rule. Same Result with Allow All Filter. The Site www.speedtest.net not working without Application/WebFilter Rule. Only…
    • over 8 years ago
    • Sophos Firewall
    • Discussions
  • Setting up Wifi on a RED 15w connected to a SG-105w

    AdrianFöder
    AdrianFöder
    How am I suppodes to setup/enable the WiFi on a RED 15w connected to a SG-105w? The W-Lan on this remote UTM is already up and working. In the Admin interface, I can see the interface wlan0 (which is enabled, working and bridged to eth0); as well as…
    • over 8 years ago
    • UTM Firewall
    • Remote Ethernet Device (RED)
  • How do I have one SSID bridged to AP LAN and one SSID bridged to VLAN?

    TobiasVerbree
    TobiasVerbree
    Hello Im trying to get the following working: I want one SSID for access of the internal network (without vlan tagging, 192.168.43.xx) -> Bridge to AP LAN And one SSID for our guest network (with vlan tag 40, 172.16.29.xxx) -> Bridge to VLAN Now…
    • over 8 years ago
    • UTM Firewall
    • Wireless Security
  • RE: AccessPoints inaktiv seit Installation auf UTM 9.4

    PhilippHaun
    PhilippHaun
    Ich habe genau das selbe Problem. Ein AP-10 und ein AP-30 sind verschwunden. Alles was hier beschrieben wurde, habe ich schon getestet. Ohne erfolg. Wenn ich den AP-30 neu Flashe taucht er in der Konsole auf. Aktzeptiere ich ihn hier, springt er…
    • over 8 years ago
    • UTM Firewall
    • German Forum
  • WLAN AP hinter VPN verwalten

    BenjaminHillekes
    BenjaminHillekes
    Hi zusammen, ist es irgendwie möglich einen Sophos AP hinter einem VPN zu verwalten? Hintergrund ist, ich habe bei Kunden 3 Firewalls (1x Full, 2x Network Protection) Die Außenstandorte nutzen nur noch RDP verbindungen zum Hauptstandort. Der…
    • over 8 years ago
    • UTM Firewall
    • German Forum
  • WiFi with VLANs basic installation problem

    hagman_01
    hagman_01
    We want to migrate from an existing WLAN solution to one managed by our UTM9.4. We are happy with the migration o fthe "Guest" network (web-based / ticket authentication), but struggle with the privileged WLAN for internal users. Old situation: Default…
    • over 8 years ago
    • UTM Firewall
    • Wireless Security
  • WLAN und VLAN

    MatteoCristofaro
    MatteoCristofaro
    Hallo, ich habe eine sehr spezielle Fragestellung, zu der ich im Netz bislang trotz langem langem suchen (ich habe das Gefühl, das gesamte weltweite Internet dazu schon erfolglos gesehen zu haben) nichts gefunden habe, das mir das Problem klären konnte…
    • over 8 years ago
    • Sophos Firewall
    • Discussions
  • Zweiten Internetzugang nur über WLAN verfügbar machen!

    c.bahn
    c.bahn
    Nachfolgendes Problem bekomme ich nicht gelöst! Wir haben einen zweiten Internetzugang (DSL). Dieser soll einem neuen WLAN zur Verfügung gestellt werden. Wie bekomme ich das hin? Alle meine Versuche verliefen im Sand. Meine Umgebung Sophos UTM 9…
    • over 8 years ago
    • UTM Firewall
    • German Forum
  • Hotspot session length

    StefanWinter
    StefanWinter
    Hello everyone, is there a way to define a Hotspot with a session length of more than 1 week? Colleagues are complaining, they have to renew their phone-logins every week. I understand this, but I found no other way. I need to distinguish Mobile-Phone…
    • over 8 years ago
    • UTM Firewall
    • Wireless Security
  • New installton with wireless AR928X and lan card

    FrancoisDesfosses
    FrancoisDesfosses
    Hi group. i just installed the asg-9.351-3.1.iso (ASG Software) to a computer. it's running firmware version 9.351-3. once installed, i went on the web gui, to finish setup and when it was asking for network, it did not displayed the WIRELESS card…
    • Answered
    • over 8 years ago
    • UTM Firewall
    • Wireless Security
  • Staff Wireless and access to internal resources

    AlleynsITSupport
    AlleynsITSupport
    Running the latest UTM on a Hyper V with no VLANS and a fairly simple setup. We have an internal network running in transparnet filtering mode with a Wireless network bridged to it. This works well except for the constant need to authenticate on the…
    • over 8 years ago
    • UTM Firewall
    • Wireless Security
  • Das Surface 4 Pro bekommt keine stabile W-Lan Verbindung zur SG\UTM.

    IPsec
    IPsec
    Hallo, ich habe mitttlerweile einige Fälle bei denen sich ein Surface 4 Pro nicht sauber per W-Lan zur SG verbindet. Mir ist bekannt dass es an den Treibern des Surface hängt, vieleicht hat aber einer von euch einen Workaround um das Problem temporär…
    • over 8 years ago
    • UTM Firewall
    • Wireless Security
  • Is there a solution to connect the WAN to a WLAN?

    DESIT
    DESIT
    The case is this: A customer has just WLAN in his homeoffice and would like to connect the RED-box with WLAN to his Router, which is located at another room. Is that somehow possible? It's clear that he should have a stable WIFI-connection. It's…
    • Answered
    • over 8 years ago
    • UTM Firewall
    • Remote Ethernet Device (RED)
  • Cascading mesh AP'

    CS
    CS
    Hi, Does anyone tried to cascading mesh ap's? I need to mesh another ap behind a mesh ap. Either: --- Root-AP ))) (((AP))) (((AP))) (((client Or: --- Root-AP ))) ((( Bridge-AP--- Bridge-AP))) (((AP))) (((client Some suggestions or comments are…
    • over 8 years ago
    • UTM Firewall
    • Wireless Security
  • DHCP for Guest WLAN

    ThomasHanslik
    ThomasHanslik
    Hi, had some trouble with DHCP and WLAN. I have bought a new SOPHOS AP15 and i added / Setup sucessfully a Network. All works fine. Now i want to Setup a second WIFI für guest Access with seperate Zone. I Setup an WLAN with IP 10.255.0.1 and i Setup…
    • over 8 years ago
    • Sophos Firewall
    • Discussions
  • One time password solution for WLAN access

    Moose
    Moose
    Hi folks, I'm running a SG 115 W with built-in WLAN and latest sw release. Works fine so far. I want to use it as guest's WALN only. Therefor I'm looking for a solution which allows our secretay to hand out one time passwords which are vaild for 4 or…
    • Answered
    • over 8 years ago
    • UTM Firewall
    • Wireless Security
<