Hi Guys, I'm running the latest UTM 9 (version 9.705-3). I have the following configuration: LAN 1: 10.10.1.0/24 LAN 2: 10.10.2.0/24 SSL VPN Pool: 10.10.3.0/24 Everything works fine. I can log in with VPN users and they get allocated an IP address…

Hi, mattin here. Im using SG Sophos and stuck just now. I want to add rule to allow connections via SG firewall to one service which is using some ports (which I know and can configure) and - as destination - is connecting to external servers which they…

Hi all. I have a custom built router using a Gigabyte J1900N-D3V board. To cut it short, inter-VLAN traffic is limited to about 200mbit, but the CPU utilization only ever hits ~30%. Of course standard snort does not take advantage of the multiple cores…

So I am attempting to download a pcap file from x.x.x.x.com/tcpdump.pcap similar to what is outlined in https://support.sophos.com/support/s/article/KB-000038909?language=en_US . I am writing the file to /var/sec/chroot-httpd/var/webadmin/tcpdump…

Complete Noob here trying to get started. To this point I've done the following: My goal setup is as follows: WAN->router->utm->internal network. utm is running in microsoft hyper-v . Configured a bridged interface as follows: 2. Added the following…

Hi Everyone, I would like to ask for your help regarding google meet. When we are inside our private network we can call someone outside our private network using google meet, audio is fine and we are able to see the video of the person on the other side…

Hey guys, having an issue with our UTM here. So we're trying to go hosted VoIP, but having issues getting traffic out of our UTM to hit the host servers. Strange thing is that the mobile app for our provider works fine, on the network, but the desktop…

Dear Community I am faced with a specific issue regarding firewall rules. By default, you can only filter IP networks/ranges, which is fairly sufficient in most cases. However, we need to filter out certain IP ranges coming from in on two interfaces…

hai class C network is possible to configure in a single ethernet port of SG230 firewall with speed of 1 Gb with DLMS/COSEM protocol

Hello Team, I have tried to use the packet Filter option with multiple combination like IP address, Port, protocol but it doesn't filter/display any result. Can I have some information regarding how exactly it is working and can I have some example…

Hi there. I have a host machine with Sonicwall Global VPN Client installed on it that can't connect to the peer/destination. The network map looks something like this: Host >>> UTM >>> Cisco ASA >>> Internet >>> VPN Target I've been looking at this…

Trying to use TeamViewer QuickSupport on an Android device that's on one internal network (10.10.0.0/24) and access it from a PC on another (192.168.12.0/24). I have FW rules allowing outbound TCP/UDP 5938. Both can "activate" TV and get an ID. When I…

Dear all, I have a serious problem with a VPN-Tunnel between a SophosUTM and a Barracuda CloudGen Firewall. The Tunnel is established but I cant access anything from the other Site. When I run a ping I continuously see that ESP Packets between…

Hi, I am new to the Sophos UTM. Have been using Untangle, but just migrated into Sophos UTM and i really like what i seen so far. The only issue i have is: I installed and configured (as far as i can tell) the Sophos UTM, but when i enable Web Filter…

Hi all am using UTM9 i cant find packet logging, if its not the same name what is the name for logging per IP thanks

Hallo Zusammen, gibt es eine Möglichkeit Anfragen an die Firewall (ping oder DNS) im Firewall Log zu sehen? Beides ist möglich aber ich sehe nichts im Log. Sobald ich Anfragen nutze (z.b. Port 23) sehe ich diesen. Viele Grüße Jiyon

I have my Cisco switch with all my vlans configured and routing working. Now I plan to add a Sophos utm firewall, and will use its ip as the next hop on the Cisco. my question is, with this setup, can the firewall rules on the utm have any affect on…

Hello, I have added a Network Definitions group called "Blocked Attackers" and added several IP addresses and IP subnets. I added a firewall rule (on position 1) with the following settings: Sources: Blocked Attackers Services: Any Destinations: Any Action…

Hi everyone, I know there are threads addressing Chromecast issues, but I have tried all of the suggestions in those threads and can't seem to get mine working with the UTM. My HP printer, cell phone, and Mac Book all pick up wifi just fine, but Chromecast…

Hi guys, Can I ask what is the usual speed for WiFi users if this is the specs of the network setup: - ISP 1Gbps static - HPE MSR3000 series router - Sophos SG330 with UTM 9 - Sophos AP55C/AP100C We are getting maximum speed of 140Mbps,…

Resetted and installed SG105 with latest UTM setup allow all traffic with setup wizard WAN is behind DSL-Router Zyxel Speedlink 5501, on which there is a firewall running, direct connected PC works fine PC connected to LAN and WAN to the DSL-Router…

Hi friends, I want to configure like this: VLAN 01-10 -------goes through 1st router i.e. (HSO_B1_WiR1) VLAN 11-20 -------goes through 2nd router i.e. (LTA1GHQA) VLAN 21-30 -------goes through 3rd router i.e. (LTA1GHQB) Please help.

Hello, It might sound like a strange request but here is the situation: I am using the UTM as a point in for several customers. One of them wants to be able to get a tcpdump in regards to the data transferred for troubleshooting purposes. I don…

OK, here is my dilemma. I have my AD setup the way I want. When I do Lite Touch, and Zero Touch deployments with my MDT servers, the tasks place the computers in specific OUs based on the role the computer deployed is going to do. I have GPOs that apply…

Basically, i installed Sophos UTM Home onto my UTM220, and followed the basic setup, however after this when i added extra Ethernet interfaces in "interfaces" they wouldn't work. To be honest i dont understand how to setup the firewall, and i need help…