I'm very happy to use the utm 9 solution, but the 50 IP limit in the context of dual stack IPv4 / 6 and cloud-based IoT devices can be very small. I asked Sophos Customer Services for pricing and they referred me to your sales partner, who also referred…

Hello team, Showing unclassified application usage in application statistic view, assume this was yt traffic . is there any way to track these traffic ? Firmware version:9.705-3 Thankyou, Lahiru

It's for this reason that I can't run Real Time protection at home. The application will hang for multiple seconds until control is released back to it. This happens with media apps, games, design, you name it. my partner said she was getting it on google…

Hi! I've an strange issue with FTP uploads to other servers / downloads from my local FTP server. I have 60Mbit Up but any FTP connection from various ISPs and daytimes are throtteling arround 16Mbit. My UTM 9 is virtualized on Hyper-V with some external…

Hi, Can anyone advise me as to why I cannot select the UTM's DHCP to assign addresses? I know there is probably some reason? But I have read through so many post, but none have answered this directly. Regards D

Good Morning, I've installed Sophos UTM this morning, got it all running and configured. I went to activate HTTPS scanning and instantly I've got a problem, How do the mobiles within my household (IPhones, Android) Get protected under this policy? Similar…

Hi there, Very new to Sophos, have been trying to setup Sophos UTM with a Virgin Media Router (hitron business hub) in modem mode, coming from using Untangle. Running the setup wizard see's both NICs on a Dell Optiplex 980, internal lan configures fine…

I am currently having issues with my wireless clients receiving a dhcp lease. They will sometimes work, and other times not. Wired clients have no issue. Setup Sophos UTM running firmware 9.509-3 WAP: Ubiquiti AP Lite running firmware 3.9.27.8537…

Hello, I loaded Sophos UTM Home VirtualBox. I tried to access the webadmin interface at https://192.168.1.200:4444 - but Firefox says: Secure Connection Failed The connection to 192.168.1.200:4444 was interrupted while the page was loading. The…

Explaining what happened to me. Internal Network was configured with two physical NIC's in bridge mode, to extend the topology. Worked fine until one of the NIC failed. But the worst thing was after the reboot, any configuration about Internal Network…

Hello, I am running UTM version 9.509-3 which supports reverse proxy. Also, I do not wish to change to XG as I have tried it and i really don't like it. It feels to me overcomplicated for no obvious reason. So I would like to achieve the following…

Resetted and installed SG105 with latest UTM setup allow all traffic with setup wizard WAN is behind DSL-Router Zyxel Speedlink 5501, on which there is a firewall running, direct connected PC works fine PC connected to LAN and WAN to the DSL-Router…

Hi all, since yesterday I have an issue with my Sophos UTM 9.509-3 Home Edition. I've running it as virtual machines on free ESXi 6.5 in HA mode, distributed on two host systems with the preferred master on node 1. Hourly there are the following messages…

Hello, I am a bit puzzled with this and i was wondering if you have an idea how to resolve it. I have a local server at localhost:81 where i am running vtigercrm. I wanted to use the UTM9 to do the reverse proxy for me. However I am getting an error…

Hi, I'm looking at integrating UTM 9 into my network. My intention is to use it as a L7 firewall with IPS and a reverse proxy so I can present several IoT devices to the Internet. I may use it for VPN too. Currently, I have: Cisco C897VAW router…

Hi to all I am in process of redesign of my home network to adding UTM to équation. All device are managed with 10gbe (fiber) or 1gbe connection (RJ45) I'm connected with FFTH, bandwidth is 100 Mbps upload/download, but it can be possible to upgrade…

Basically, i installed Sophos UTM Home onto my UTM220, and followed the basic setup, however after this when i added extra Ethernet interfaces in "interfaces" they wouldn't work. To be honest i dont understand how to setup the firewall, and i need help…

Hi all! I didn't find a answer for my problem where ASG Home Use License expired. I recently got this message and I didn't manage to find some answer here or by contacting the Sophos customcare. Sophos customcare reject to help me because I only…

I've been using a small UTM appliance for a few years for my small business and installed a home version for the house a year or two ago. Both have worked nicely with very few issues. As of yesterday, my home UTM is acting up and is pegged at 100…

Hey guys, I have setup a new authoritative name server for my domain. What do I need to setup on UTM for this server to be able to server external dns requests? I added this NAT rule Do I need to do anything else? Seems like DNS server…

Hello guys, I´m planning add my own name server for my domain. Just for testing in my lab. Is there any option to protect this server which will be opened to the Internet with Sophos UTM? I´m using IPS and name server will be in DMZ but is there any…

Hi, I have configured a few subnets in my utm. In my "internal" subnet (192.168.2.0/24) a chromecast is connected. How do I need to configure my utm, that clients from the second subnet (192.168.221.0/24) can connect to the Chromecast? Any ideas…

Morning All, I'm begging for your help should anyone know, I've been working on this for 24 hours now and am using a PFsense VM just to get by. I have a very loaded UTM (full of config for websites, SMTP rules, web rules etc) about a years worth…

Hi All, This is more of a, "Hey, look what I found", in hopes it may help others looking at the same problem and need a workaround. This all started when I could not stream video from my Zoneminder (ZM) server when connected to my network through…

When connected through UTM 9, my iOS devices are not able to send or receive mail with multiple providers (EG: Yahoo, Gmail and 50webs hosting). When on LTE network, everything works as expected. What do I need to do to fix this problem? Thanks…