Hi all, I am in the optics and the reflection to start the project of segmentation of my local network. i have xg 330 as edge firewall Si i think about to methods, go with L3 switch for inter-vlan routing or don't make L3 switch and do all the segmentation…

SCENARIO : Sophos firewall IP : 192.168.177.254 Vodafone Router IP : 192.168.80.1 - Internet How do i configure vodafone on sophos in other to get the public IP to use for my VPN connection.

Hey all! I'm looking to schedule SD-WAN routes. For example, to send my traffic down one gateway during working hours but then move to another one for the evenings/weekend. It seems schedules are available elsewhere for rules, but not for SD-WAN. I guess…

We have a separate VLAN set up and working for our Guest Wifi network. Clients (mostly cell phones) receive a DHCP IP in the correct range, are segregated from any other network communication, and can get to the internet fine. What we would now like to…

Hi there, can someone please tell me where I can find the equivalent of Zyxel's Policy Route

Hello, I have this network architecture , And my goal is that the VLAN100 (with Network IP : 192.168.123.0/24) to have access on my Server 172.20.24.24 So , I create this Route on my Sophos Firewall ( version XG S3300 firmeware 19.0…

Hi, I am currently changing our IPSEC VPNs from Cisco ASA to Sophos XGS, but now I am experiencing a strange behaviour regarding the routing. Route-precedence is VPN-Static-SD-WAN. Currently the ASA is handling the IPSEC tunnels so I created 3 static…

Currently, I'm using the SOPHOS XG firewall in my office There are two ISPs: a primary ISP ( SuperNet ) with a dedicated link of 40Mbps, and a secondary ISP ( Transworld Home Fiber ) with a 100 Mbps shared link, and I want to configure my voice server…

Hey there, My DHCP IP address from my carrier is 203.xx.xx.xx/16 but the gateway is in a different subnet 100.xx.xx.01.. wacky system, but not one I was really expecting.. The issue I'm running in to is that I'm trying to establish a backup IPSec…

Hello Everyone, one of our customers has a phone system (Panasonic KX-NS700) that uses multicast to synchronize the Cell-Stations (KX-NS0154). The Cell-Stations (DECT) use PTP for synchronisation.There is one Master and several Slave-Stations. Although…

Disclaimer : This information is provided as-is for the benefit of the Community. Please contact Sophos Professional Services if you require assistance with your specific environment. Table of Contents Overview SD-WAN Application Object…

i have XG firewalls located in china and sometimes the latency of some links to sophos getting to slow so i dont get a resonse in time for example for live protetcionn right now im trying to setup a SD WAN for all sophos services, but that it work well…

Good morning everyone, I configured the BGP over RBVPN between our office and the 2 connectivity present at one of our customers (fiber and radio link), the connection is made via the prepend AS also tried with LOCAL PREF AND MED, if I try to switch off…

Hello Community, We have this scenario where in we have a branch location and the location is connected using 2 P2P Links. At HO side we have Sophos XG330 and BO its a Sonicwall. The P2P links on XG330 are in DMZ zone, we have created custom gateway…

Good morning everyone, i'm trying to implement BGP over RBVPN, neighbors are up only when i add the comand disable-connected-check and if i use the comand maximu-path 20 they cannot establish, any advise? Also with the comand disable-connected-check both…

XG210 (SFOS 19.0.1 MR-1-Build365) Hello, I have to create a lot of static routes and would like to do this via SSH. When I create a static route via "ip route add 10.xxx.xxx.xxx/24 via 10.xxx.xxx.xxx" it is clearly visible in the overview "route…

Disclaimer: This information is provided as-is for the benefit of the Community. Please contact Sophos Professional Services if you require assistance with your specific environment. Table of Contents Overview Traditional Settings For Primary…

Hello everyone, How do i create a static route pointing to null0? I need that route to be a summary route so i can advertise it in bgp. Many Thanks, Dragos

We have 3 internet links; I want to route the web-based system (URL) through one of the WAN links. Please advice on how the routing should be configured. Whenever the user click on the link, it has to point to the dedicated WAN link.

We have a location where we have Sophos XG106 Firewall serving as Gateway. We have one MPLS link on the location. We are facing issue when we shift / redirect traffic on MPLS link to connect to HO. Static routes are working fine. We are able to reach…

Disclaimer : This information is provided as-is for the benefit of the Community. Please contact Sophos Professional Services if you require assistance with your specific environment. ______________________________________________________________________________________________________________________________________…

Dear All, i have configured two isp as below snapshot is it corect or we need to configured sdwan policy for redudancy please suggest.

Hi, we have a client, We created a VLAN on a MPLS VPN for a site branch to access the internet from the head office. We have two branches connected under the same VLAN ID. the other one is working successfully, but the other branch is connected but…

Short question: What are default values for both option of "set routing sd-wan-policy-route" in the CLI? The docs could make this more clear, as they only mention, that I *can* turn both on: SD-WAN routing behavior - Sophos Firewall and set - Sophos…

Hello, I'm stuck on a LAN routing problem. We changed our UTM firewall to XGS116, I recreated the rules and configuration on the new firewall, but I have a problem with the incoming traffic to the internal network. We have several offices that are interconnected…