• Connecting VOIP phones behind a RED to PBX/SIP behind UTM on different subnet.

    WABGOR_DAVE
    WABGOR_DAVE
    Hello all, Presently we have 5 small remote offices running REDs on Standard/Unified configs, so that everything is filtered via the UTM here at HQ. At HQ we have a PBX with approx 35 VOIP phones on it and is capable of handling another 50, easily.…
    • over 3 years ago
    • UTM Firewall
    • Remote Ethernet Device (RED)
  • Verbindungsproblem XGS nach RED20

    JvO
    JvO
    Hallo zusammen Ich habe das Problem, dass ich in einem Netzwerk XGS mit entsprechenden Reds zwar einen Zugriff von der RED in die Zentrale bekomme, jedoch von der Zentrale nicht auf Geräte die an der RED angeschlossen sind. Überprüfen tue ich das ganz…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • RED List disappears with more than one dynamic DHCP range configured

    LHerzog
    LHerzog
    My heart just missed some beats. After increasing the size of the subnet of one RED Device and then, because there was an existing static lease in the middle of the new available Net-Range, I decided to add an other dynamic range after that static entry…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Spanning Tree on SD-RED?

    JackLeach1 JackLeach1
    JackLeach1 JackLeach1
    Hi, Looking at deploying a new site with a Sophos SD-RED60 and as there will be a few switches at this site would like to put some redundant switching options in using STP. I can't see any options in a RED interface for STP. Is it possible to configure…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • RED20 doesn't connect to the XG

    Alex Dalton
    Alex Dalton
    Recently I purchased a RED20 to connect our branch office to HQ. The HQ has a Sophos XG firewall (XG310) which is all up to date. When I try to connect the RED20 from the brach office to HQ no connection is being made. What happens is this: when…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • DHCP Relay through RED Tunnel

    Kevin Murphy3
    Kevin Murphy3
    I am trying to setup DHCP relay for a RED Device. Is this possible because I can't get it to work. I am running SFOS 18.5.1 MR-1-Build326 172.16.10.13 is the IP address for my Windows Server DHCP. I ran packet capture on the device and it shows…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Standortvernetzung mit 3 Standorten

    Alexander Ohl
    Alexander Ohl
    Hallo, folgende Herausforderung: Aufbau: - Red20 Ist mit Standort B verbunden (Standard/Getrennt) - Standort B (XG) ist mit Startort A (XG) verbunden (RED Tunnel) Läuft zuverlässig. Nun möchte ich von der RED20 über Standort B auf Standort…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • New RED - Can't access LAN, just internet

    Adrian Henderson
    Adrian Henderson
    Trying to figure this out with the tech docs. I finally got it connected and my tracert goes out the office WAN, great. I can't ping the LAN IP of the RED from the firewall diags nor can I ping anything in the main office. I set up a RED zone and firewall…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Spanning Tree on SD-RED

    Phil Brown1
    Phil Brown1
    Hi, Looking at deploying a new site with a Sophos SD-RED60 and as there will be a few switches at this site would like to put some redundant switching options in using STP. I can't see any options in a RED interface for STP. Is it possible to configure…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Outlook and certificate "issue".

    WABGOR_DAVE
    WABGOR_DAVE
    Hello all, As the UTM 9.705-7 we are using was setup by an MSP and at that time we had Exchange 2010, on premise as well. We've since moved to Exchange online and I handle all the Sophos items now. Lately we have random users receiving the following…
    • over 3 years ago
    • UTM Firewall
    • General Discussion
  • RED15W changed IP now Access Point cannot ARP to 1.2.3.4 unreplied, remains inactive

    LHerzog
    LHerzog
    I have a RED15W which was working fine, with WiFi. AP was active. Because the IP range assigned to this RED became to small, I changed the IP and Subnetmask. Changed the DHCP Server object on the XG accordningly. The built-in AP of that RED…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • SD-WAN and RED | VoiP Routing Problem

    Dennis D
    Dennis D
    Hi, So i have the following Problem: On Site A i have a XG v18 with 2 WAN Interfaces, a client network (192.168.166.0/24) and a VoiP Network (192.168.168.0/24). WAN-1 is the default WAN and with SD-WAN routing all traffic coming from the VoiP Network…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Modify sophos red

    David Moro
    David Moro
    Hi, does anyone has tried ​to install XG SFOS on a sophos red through serial? Just want a red to became my home firewall... someone have some tips? Thanks a lot guys
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Red 60 Standard/split mode port forwarding

    Ahmet Sirikligil1
    Ahmet Sirikligil1
    Hello i have xg 330 and in branch red 60 Standard/split 100.50.20.x Tplink global IP:85.85.85.x local IP:192.168.1.1 i want to forward 3389 port to server 192.168.1.x how to port forward Thanks
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Assistance to connect sophos RED20 to home router

    Sophos Ngolo
    Sophos Ngolo
    Hi I wonder if someone can help me connecting sophos RED20 to my home router and monitored by XG Firewall which will be sitting on remote location. I have already added RED20 to XG firewall and provisioned it. But it still shows offline on XG Firewall…
    • over 3 years ago
    • Community Chat
    • Discussions
  • RED vs competence comparison

    Leandro Villar
    Leandro Villar
    Is there a comparison between Sophos RED, Cisco Meraki and Fortinet Fortigate? Pros and cons, for example.
    • over 3 years ago
    • UTM Firewall
    • Remote Ethernet Device (RED)
  • SD-RED60 offline for a long time after reboot

    LHerzog
    LHerzog
    We have a SD-RED60 where we first noticed this behaviour when we applied the firmware 3.0.005 which is currently installed. When we installed the firmware, it rebooted and came back about 65 minutes later. In the meantime I noticed several DHCP requests…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • RED Service drops packets with error: too much work queued, dropping packet

    Patrick Bardusch
    Patrick Bardusch
    Hi Community, we have a UTM that has 35 red tunnels connected (configuration: all split tunnel) , each red has 10-20 clients to handle, most of them connected simultaneously. Since a few days the tunnels are randomly dropping packages, they don't even…
    • over 3 years ago
    • UTM Firewall
    • Remote Ethernet Device (RED)
  • SSL3.0 TLS1.0 for Port 3400

    raywo
    raywo
    Hi, I did a vulnerability scan of my external IP and in the results I can see that SSL3.0 TLS1.1 and TLS1.1 are still supported for Port 3400. I guess this was already asked before but I didn't find it in the forum. Is there already a solution for…
    • Answered
    • over 3 years ago
    • UTM Firewall
    • Remote Ethernet Device (RED)
  • Requesting for an Unlock Code - RED10 Rev 3

    Zeron Alinsod
    Zeron Alinsod
    Hi, I'm having a problem logging on your support portal. So maybe I can request here an unlock code for our RED 10 device? RED ID# A3200C66EC9E62B Model : RED 10 Rev 3
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • REDs connectivity issue

    Informatica VECI Mexico
    Informatica VECI Mexico
    Hello Hope to get some advice from this great community, as this problem is driving me crazy Our specs: ASG Software, Firmware version: 9.705-3, runing on a VMWare ESXi 6.0U3 We have like 50 RED devices, models 10/15/15w/20, most of them in Standard…
    • over 3 years ago
    • UTM Firewall
    • Remote Ethernet Device (RED)
  • Sophos XG LAN TO RED LAN

    Sophos User4767
    Sophos User4767
    XG210 (SFOS 18.0.4 MR-4) 2 RED 60 Devices at remote sites MAIN OFFICE: 192.168.0.0/16 RED2: 172.16.0.1/255.255.255.192 - Standard/Unified - Zone: LAN RED1: 172.16.0.65/255.255.255.192 - Standard/Unified - Zone: LAN RED Devices show up connected…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Sophos RED

    admin_idl
    admin_idl
    Hello, Is it possible to configure the RED so that the remote clients get an IP from our internal DHCP, i.e. behave in the same way as if they were on our internal LAN? Best regards!
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Sophos XG with RED 60 remote sites - Main office to Remote site LAN

    Sophos User4767
    Sophos User4767
    3 remote sites with RED 60 devices connected to main office Sophos XG Unable to access devices at remote office from main office RED Operation Mode Standard/Unified RED Interfaces in Zone: LAN Already added Firewall Rule - Source/Destination LAN…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • SD-RED 20

    Omar Garcia1
    Omar Garcia1
    Cannot ping main site server; Unable to access site 1 resources. I noticed that the system host ip for reds1 is not the same as the remote site external IP. After I upgraded and re deployed the red, I now see the remote subnet I assigned as the #reds1…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
<>