I work for a healthcare provider. We are going to provide services for the schools in our county. I need to set up a small network (2-6 devices) inside each of the schools that can communicate with the home office. The school is providing internet via…

Hi Can anyone assist with a link or Documentation on the Recommended Red Device Sizing guide for XGS 3100 & XGS 4300 thank you.

Hello, i have sucessfully configured the RED20 Device to my XGS-126. I can reach any device, that is connected to my XGS Network. Now i need to configure the acess back to the devices that are connected to my RED Network. I can ping the RED20 Device…

Hey, I,ve got the problem that I can not ping the RED device itself but all devices connected via this RED device. I have firewall rules in place to allow this ping cross these vlans. Is there any specific setting in Sophos XG, like "Device Access…

Hello Guys I have a Red 60 and I can ping it from Sophos XG135 but not form any laptop form the main office LAN. I have even set the route_precedence to 1. VPN 2. SD-WAN Policy routes but it does not work Could someone help me out with this…

Good afternoon all, Recently I deployed a Fortigate firewall at our edge and replaced the Sophos XG 210 we previously used. However, I have a remote site connected via a RED device and rather than mess around with another box and IPSec VPN tunnels,…

Hi, I got an brand new XGS2300 Cluster (active-passive)at on of our customers which six SD-RED 60 connected. When making changes to one of the RED tunnels (every tunnel has two VLANs in access mode, drop tagged associated) the update of the interface…

Hi, I've problem UTM310 with RED60. the REDs (transparent/split) and another site i have sophos cyberoam ICMP ping forward is enabled. Ping from Client behind RED to internal is good and i can access any client but i can't access from side. I check…

HI I would like to deploy RED at 16 remote sites, I would like to know if Sophos XG 135 ( which is our client existing firewall) supports RED-50. Thanks

Hello all, looking for some help and guidance. I have one office with a sophos xg and 4 remote sites using SD RED 20 units. All 4 SD RED 20 units are connected back to the XG using standard/unified mode. No issues with getting this all connected.…

We have 3 primary sites, they have XG125 and Custom hardware 4-core 6GB RAM boxes, all running 18.5.1. There are 7 branch sites, each has 3 RED tunnels, to the main 3 sites above. Ever since we upgraded to 18.5.1, it seems like when a Branch or…

Deutsch (english below) Hallo zusammen Wir haben in den aussenstandorten jeweils ein RED. Wenn ich den Drucker in einem RED-Standort oder vom Hauptstandort an einem RED-Standort über Windows verbinden möchte, erkennt er den Drucker nicht automatisch…

This topic was discussed here but I found a way to make it work. However, this solution causes something else very important to stop working. The following problem originally exist. Based on Sophos SFOS 18.5.1 MR-1-Build326 When creating a new hotspot…

Hi All. Has anyone come across this before. I had a RED15 device working fine on UTM. I moved it to XG and it works fine. Try move it back to UTM and it does not connect at all ? Any ideas, its still working on the XG so I dont understand why…

Hi, We are going to change the IP address of our XG Firewall WAN interface to another ISP. My concern is our SOPHOS RED 50 devices which we deployed 25 in our branches. What do i need to do? Do i need to request for new unlocked code because the current…

Ive been using XG and UTM for a while now and have used RED a few times, but ive got a dedicated server now in the cloud and i installed XG on it for my edge firewall. I setup a red tunnel from my xg to that xg but i had a windows 2019 vm running on the…

Hallo, anbei eine grobe Übersicht meines Heimnetzes: Um von außen per VPN auf mein Heimnetz zuzugreifen, habe ich wegen dem CGNAT meines ISPs einen vServer (Sophos RED 15) mit fester IP gemietet und eine Verbindung mit meiner Sophos UTM 9 hergestellt…

Hi guys currently use a combination of standalone IPSEC vpn's and GRE/IPSEC tunnels to connect sites.I've run into some documented issues here on the forum with GRE/IPSEC and need to start looking into alternatives. How well do RED tunnels scale bandwidth…

Our current fiber provider at our branch office is switching from static IP settings to PPPoE. We have a RED50 device on this location which does not seems to have a PPPoE option. Is there any way to enable this?

Hallo, ich habe hier zwei UMTs (SG230) an zwei verschiedenen Standorten, die jeweils in HA betrieben werden. Somit sind vier UTMs angeschlossen. Um die beiden Standorte zu verbinden, habe ich unter der RED-Verwaltung - Tunnel-Managment einen Tunneling…

Hello, I have succesfully connected a XG210 and a XG125 with RED site-to-site tunnel. From the network of the XG210 (10.69.95.0) i can ping the network of the XG125 (10.69.94.0). But when a client connects via SSL VPN on the XG210 he could not ping…

Hello, I still don't get it, what are the purpose to use a RED site to site VPN ? From what I read: - its slower than IPsec. - its as easy as SSL VPN to setup. - its not possible to extend a same subnet with this mode because you have to…

We have multiple manufacturing sites within the US, each site has its own T1 for private WAN and its own internet connection as a backup to the T1. Despite pulling as much traffic out of the private WAN as possible, we have grown out of the T1's (shocker…

Good morning, Does anyone Else have the problems or have an idea what the problem might be. We have a Headoffice Thats has a Server Running a ERP. the database Uses Firebird. when we connect to the server in the headoffice the program runs great.…

Hi! Just a quick question: When connecting two UTM using a RED tunnel, is it possible to aggregate/bond WAN links on one of them in order to get a higher throughput? I need to connect a branch office using two or three slow DSL lines to the main office…