Hi All,
I've had a bit of mare configuring and installing this recently - hence the plethora of questions over the past couple of days. Anyway, I've got to a new stage at the moment.
My network is configured as such:
DMZ 10.0.0.16/28
^
(To…
So I had this working not so long ago but decided to restart it after I changed a few IP addresses and couldn't access it. So plugged monitor and keyboard into my box and selected the "factory reset" option.
So; my device has 4 network ports and I'm…
Hi,
since I am using XG, I'am getting always IPS alerts, and I am concerned about, because I don't know the reason of these alerts.
Are IPS alerts a alert about accessing websites with vulnerabilities or outdated software, or means an IPS alert…
Morning,
Just a quick question. Is it possible to configure two ports into a completely transparent bridge? Basically, I want traffic to flow into one port on my device and out of another without it ever "seeing" the XG software. Obviously, I want…
Hi,
I have a situation in our new XG 330. All VPN Users are having trouble accessing an internal web server via web browser. It gives the users the Error 502.
What I already did to isolate the issue:
- Removed the HTTP scan from the FW Rule…
Am a new babie in SOPHOR firewall. I have a new XG210. I want to achive multiple DMZ, WAN and LAN.
I have my core switch connected to the firewall which had two vlan one Management and the second one SERVER. I want to have two ISP connection which would…
Hi all,
I have a XG210 in gateway mode. Also I have a server with a site (100.100.100.4) in it and an internal DNS server (100.100.100.2) to publish the site.
I can see the site from the internet but not from the internal LAN.
I have a DNAT rule…
Wondering if anyone has seen this before.
We have 3 offices, Main has a 210 and the Branches both have a 115 connected to MO with a S2S SSL VPN. In the MO the local lan is great, quick, no issues. But at the BO, their connection to the MO is very slow…
Hi everybody,
I want to have a WIF in my sophos xg 115 without access to any other network in it.
I created a "separate zone" wifi and added it to local Access point. After that, i created a new dhcp for this wifi.
After all, i have a functional…
Hey gusy,
I´m trying to setup new subnet 172.16.1.0/24 on used interface - eth1. Is it somehow possible to set 2 different IP ranges 19.168.100.0/24 and 172.16.1.0/24 on same interface without VLAN?
Thanks for any help!
Regards
Jiri
Hi everybody,
I just instaled a sophos xg 115 firewall and i cannot Access to internet.
I connected firewall's port 2 (WAN) with ip 192.168.1.2/24 to my Movistar Router (ip 192.168.1.1/24), and then i created a LAN in port 4 with ip 192.168.75…
Hi All, I' m having a huge headache over this issue..
We've got XG Firewalls deployed at our customer sited, they are all working nicely, but we like to set up an IPSec tunnel to our local pfSense firewall to monitor the equipment.
I'm getting the…
Hi, Recently connected our Head office and branch with XG 115w and RED 15.
Getting internet and local network but cannot get ichat to and from head office to branch.
At head office, getting ichat within office and at branch office getting ichat within…
Hello everyone. I'm brand spanking new to the concept of UTMs in general and Sophos in particular; but I'd like to use it to protect my home network.
I'm about to purchase a barebones mini PC to use for installing SOPHOS UTM Home edition on it. However…
I can access all LAN resources from the VPN but I cannot ping anything from the LAN to the VPN. I have worked with support and they have verified all settings are correct within the XG.
XG135 (SFOS 16.05.1 MR-1)
Environment:
Server 2016 with AD…
Hello,
I've been using the XG Firewall for a few days now and it's great so far.
There has been one issue I couldn't solve on my own, I hope you guys can help me with this:
I've got my network configuration like this:
Now all I want is to…
We have an application that uses a specific port range for TCP/UDP. For example port 48129-48137. If there a way to add this service and specifiy a RANGE of allowed ports it can connect on. Rather than a single port.
Since I use a XG Firewall, my Downloads are starting with a delay of 10 up to 15 min.
After ~50% the download fails/interrupts.
I use a Sophos XG home with a 4 core Intel i5 and 6 GB of Ram.
I also tried Web caching and to reduce max. file scan…
Dear All
several months ago, I bought XG85W (with AP15) for private use but I was disappointed regarding its limitations compared to the XG Home Edition. So I decided to buy apparently compatible hardware and install the home edition. Installation procedure…
We have a newly office and it's now operating, but we have some problem regarding network access, here our network:
SiteA and Site B is connected through VPN IPSEC, everything is ok within this two networks, ping and trace router are all ok.
SiteB…
Hi;
Smart Phone with xg firewall (software) How can I get out to the internet. I can not make internete output via modem because modem is in bridge mode. Is it possible to do over the phone output with XGA firewall?
Hello, i'm experiencing an issue with my XG105w.
I have multiple Vlans in my network created with the xg105w, and when i transfer a file from 1 server being in the Vlan 1 to another server being in another Vlan, the transfer speed is limited at 60MB…
Hey Everyone,
i'll have the following issue with our XG Firewall.
We have two uplink ports which on the main one has already an ISP provided failover in place. But the failover has a switch time from roundabout 1 minute from main to backup.
Meanwhile…