Is there a way to create a vlan allow connected devices (via AP) bypass firewall? My current SSID in Vlan has a different IP subnet from my home devices. There are times I want to connect devices that totally bypass home firewall. This setup doesn't…

I am having an issue routing traffic for newly created VLANs. I have created a new vlan and am able to ping the XG gateway (and get to the Web UI), but I cannot get out to the WAN. I tried creating a firewall rule that allowed traffic from both the…

I have issues using DHCP on a VLAN. DHCP server and DHCP relay are not assigning IP address to a VLAN. First, this is my setup. I have a core switch that is attached to all servers. The core switch is attched via a LAG link to the XGS firewall. The…

Hi all, I have a XGS116 and created a LACP LAG to the L3 core switch. The LAG is working as I can ping from the firewall the core switch and it´s all VLAN interfaces. The strange issue I have is that I can´t ping any other device "behind" the core switch…

Hi All I worked on SF01V (SFOS 17.5.10 MR-10.HF062020.1) I created 2 vlans with IDs 10,20 vlan 1 is 10.10.10.1/24 under port1 (lan) vlan2 is 20.20.20.1/24 under port 1 (lan) and thin i created DHCP for every one Vlan1 10.10.10.10 - 10…

Query: I have Cisco 300-52 Manage Switch VLAN 1 -- 192.168.0.1 --- WORKING FINE VLAN 2 -- 192.168.100.1 -- WORKING FINE DHCP is through Sophos Firewall i have created the VLAN 5 on the same switch & assigned the one port to vlan5 created the DHCP in firewall…

cant figure out what I'm missing... XG125 I have APX120 connected to port5. tagged vlan is turned on. port5 192.168.5.1 3 vlans are on port5 vlan5 - 192.168.55.1 vlan10 -192.168.58.1 vlan20 - 172.18.58.1 APX120 is tagged vlan5 my wifi…

First of all, apologies if this is a really stupid question, I'm still learning the XG Firewall. We're migrating from a Sonicwall and I'm trying to reproduce the DHCP config we have on the XG. It's simple enough: I've got range #1 replicated, easy…

I have a XG running 18.5.1 MR1. This XG has 2 physical interface bridged together with multiple VLANs. Each of these connections go to a managed switch via said Bridged(Trunk) connections. I have a Server in VLAN 5 that is connect to one switch…

hi all, under "network > interfaces", when i add a "vlan" ie give it an ip/subnet/vlan tag no etc and bind it to a physical port i can see it under vlans page when i go back under "interfaces" it just says connected but NA under the ip details, why…

Sophos XG430 firewall, multiple VLANs and two ISPs are working in our network shown in attached picture. I want to use ISP2 (Wateway1) for VLAN21, VLAN24, VLAN24 and ISP2 (Wateway2) for VLAN16, VLAN17 internet traffic , is it possible we use both gateways…