I have a Samsung Galaxy S7 running Android 6.0.1 and a Sophos UTM device with firmware version 9.404-5 (holding off on updates because I was bit by the MTU "feature"). I have almost literally tried every combination of IPsec, L2TP, and PPTP configuration…
Moin Moin!
Wir werden immer wieder auf ein Problem mit der L2TP VPN Verbindung für unsere Mitarbeiter aufmerksam gemacht, welches sich darin äußert, dass während eines Datentransfers die Verbindung immer langsamer wird und schließlich ganz abbricht…
We have an L2TP over IPsec VPN that works but I'm trying to optimize it. (My networking knowledge is not great, i've searched for several hours on the web looking for solutions before asking here)
I can't figure out how to get the UTM to act as our…
We're trying to setup VPN access for workers working from home using L2TP over IPSec. Testing from the LAN all goes well, but when trying to connect from outside of the LAN, we get this error:
2016:06:28-10:36:47 motif pluto[18344]: "L_for Remote Users…
Hallo zusammen!
Ich habe es erfolgreich geschafft eine VPN Verbindung via L2TP über IPsec einzurichten. Nach der Verbindung mit dem VPN-Netzwerk erhalte ich zwar Zugriff auf alle Internen Geräte (2008R2 Server, Firewall, Computer usw.), aber eine Internet…
We have an SG230 in a remote facility which we must make VPN connections to, preferably over L2TP/IPsec. The problem is that they haven't provided us with a public IP per se, instead they have given us a private IP which is 1:1 NATed in their firewall…
Hi all,
I've recently replaced my TMG 2010 with the latest UTM 9 software appliance on a vm (ESXi). I must say, the WebAdmin is a treat, a wealth of options & features, with a bit of a learning curve as well, but loving it :)
The LAN setup (private…
I have the following ports forwarded.
6515 - User Portal
6514 - Admin Portan
1701 - L2TP
4500 - IPSEC Tunneling
500 - Ipsec
The router ia a netgear Netgear CG300DCR
Hi,
Greeting.
Make sure that you have LAN to VPN, VPN to LAN and VPN to WAN(with NAT) rules are added to the XG device. Also please enable the Use default gateway on remote network on client from where you are connecting the L2TP.
-Mayur Makv…
I am quite frustrated right now. I have, for days, been trying to set up a very simple L2TP VPN Remote Access to my internal network.
My Internal LAN is 192.168.3.0 / 24
I want my remote users to be able to access everything on my internal LAN as…
Hello,
Hopefully some one can help me. I am trying to setup a IPSEC VPN connection with the Sophos XG firewall. I have configured the IPSEC policy for remote access and also the l2tp server. I have setup the Windows 10 Built in VPN client to connect…
Hi Leon,
sorry if I enter on this thread but, without rewriting all, I'm in the exact same situation and, also with your console command fix, the authentication don't works.
So this is the check list:
1- PPTP and L2TP enabled and the address range…
Hi there!
I'm trying to build site to site VPN using ASG v7 and Windows 2012R2 Routing and remote access
I've configured PSK Gateway on ASG and IKEv2 interface on windows. On windows I opened UDP 500,4500,1701 ports (tried opening all traffic there…
Hi,
Is there any guidance on how can I connect Asrato Security Gateway v7 and windows machine with site to site VPN.
On windows side I can use Windows Remote access and routing or any other free third party VPN software.
I suspect you issue here is a miss match in the authentication method, the default authentication method for L2TP and PPTP is MS CHAP v2 which will require authentication via a RADIUS server (such as NPS). In order to directly authenticate against Active…
How do you go about setting up a VPN profile that uses L2TP to authenticate? Or IKEV2 (our secondary VPN).
I see no option in the GUI on SMC 6 apart from IPSEC and a few others we do not have. O
The devices are iOS 9 and the server is the latest version…
Hi there,
we have several domain-joined Windows 7 PCs for home office which connect via Sophos RAS (pptp & L2TP). The VPN user is authenticated against a radius Server (RSA Token) behind the UTM 9.
All connections over the VPN in our domain work well…
I have setup L2TP on my UTM and I can successfully connect to it from a Windows 7, 8 & 10 and even MAC. Once connected, and authenticated, I can ping the Sophos (192.168.10.1) but nothing else. Sophos shows the user connected but cannot access the systems…
I have been looking for this as well. There is no documentation as far as I can see that will work for IPSec. The only one that resembles help for this is CiscoVPN community.sophos.com/.../123136 . But overall this is not intuitive for me. This really…
I'm trying to prepare my SF box for remote access. I successfully configured it for SSL VPN (OpenVPN) and surprisingly Cisco IPSec (on iOS 9 device). But I wan't my Mac to connect without OpenVPN using either L2TP or IPSec options.
Unfortunately I can…
Hallo Community,
diesmal versuche ich es auf Deutsch.
Ich hoffedas mir jemand helfen kann. Leider bin ich nicht so bewandert was die Sophos Firewall betrifft und mein Englisch ist auch nicht das beste.
Ich möchte gerne mein Android Smartphone…