• Layer 3 Routing

    B.R.O.
    B.R.O.
    Has anyone had to overcome Asymmetric Routing in your LAN similar to these diagrams? There is alot of serial communication traffic being converted to ip traffic then needs to route to a server on the remote lan. 10.141.12.1 uses 10.141.12.86 as the gateway…
    • over 6 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • Ethernet and VLAN on the same interface

    DanielOlson
    DanielOlson
    Is it possible to have a standard Ethernet interface and a VLAN interface on the the same physical Ethernet port on the SG230 running UTM 9.508-10. The interface started as a standard Ethernet connection on one network and we are needing to expand into…
    • Answered
    • over 6 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • Problems with connectivity gateway when using ethernet VLAN

    James Bates1
    James Bates1
    I'm working with a private cloud with 2 ESXi's. I have a client (VLAN 520), server (VLAN 521) and DMZ (VLAN 522) zone. All these zones are connected on a distributed switch. I set the gateway to every zone to an interface on my SOPHOS. Client VLAN…
    • over 6 years ago
    • Sophos Endpoint
    • Discussions
  • vDSL and VLAN tagging issue

    Mohamed Hassan
    Mohamed Hassan
    Hi Guys, I've switched from DSL to vDSL PPPOE and having issues getting the link up. What I did: Put the vDSL modem on bridged mode Checked VDSL checkbox Tried without VDSL and doesn't work Used VLAN 100 in the WAN interface as I can see my…
    • over 6 years ago
    • UTM Firewall
    • Hardware, Installation, Up2Date, Licensing
  • VLAN 1 connect to UTM

    kuno
    kuno
    I'm a newbie to both AstaroUTM and networking both, with some knowledge but limited experience. I would like to learn step by step correctly . I have a LAYER 3 HP Prociurve 3400cl Switch and i would like to use it as CORE SWITCH for my LAB Network.…
    • over 6 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • Bridge to VLAN - How to setup your UTM?

    Yves Schumacher
    Yves Schumacher
    Hello, I'm very tired of searching the web for an answer to my issues with my Wifi setup on my Sophos UTM. What is my setup? Sophos UTM 9.505-4 AP-55 What is my goal? Creating two SSIDs: The users of SSID A can access the internal…
    • over 6 years ago
    • UTM Firewall
    • Wireless Security
  • UTM not connecting to WAN(Comcast)

    phx78
    phx78
    I have set up UTM 9.506-2 on Hyper V, WIN Server 2016. I have set up the machine and can connect to the admin interface via internal LAN. However, External WAN connection on UTM will not pick up an IP address from the cable modem. The WIN server will…
    • Answered
    • over 6 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • Connecting to wireless 5Ghz antenna with both PPPoE for WAN, and static ip for antenna management.

    Vegard77Norway
    Vegard77Norway
    So... One of my ISP's have given me a new 5 Ghz antenna. Same as the old antenna this antenna enables WAN connectivity through PPPoE. In addition, as most antennas, there are local management features available through a static IP address and/or DHCP…
    • over 6 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • Cannot add additional LAN interface

    JeffCooper
    JeffCooper
    Hi, I have an SG230 with a couple LANs: Staff and Guest. They work fine and can get out to the internet. I'm trying to add a third LAN. I seem to have all the settings the same as the other two (different subnet of course) but for some reason at cannot…
    • over 7 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • Interface tracking / reachablity check in HA

    Emre Tayfur
    Emre Tayfur
    Hello all, I have 2 Sophos UTM 9 for redundancy. I configured them in HA. Now I would like to have interface tracking or reachibility check so that if one interface down, the othe pair should be Master. How can I manage to do it in configuration?…
    • Answered
    • over 7 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • Lost ability to send welcome email

    Joe H
    Joe H
    When selecting a user and clicking Email Setup Link, there is no longer an option to send a welcome email. Has this feature moved?
    • Answered
    • over 7 years ago
    • Sophos Endpoint
    • Discussions
  • connection between 2 networks is 100Mbps

    leo hamel
    leo hamel
    Hi All I have UTM 9 Model: ASG Firmware: 9.520-4 Pattern Version: 131575 also i have many interfaces configured at the UTM, i am having speed issue between the interfaces they are all 1000 Mbps but the transfer rate is no more than 12.3 MBps…
    • over 7 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • One seperate external Line for only one SSL VPN Power-User of many

    FHegnauer
    FHegnauer
    Hello Everyone, a customer of ours asked us a question about giving a Power-User a seperate DSL-Line with a static IP-Address for his home-office. So here is my question: Is it possible to give one single user an ssl-vpn profile that connects…
    • over 7 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • DNAT black hole/null routing not working

    Bobby Tables
    Bobby Tables
    I have been reading through Rulz and this earlier post trying to get my blackhole/null route working with DNAT since my firewall rules were not (as explained by Rulz). From the latter link, BAlfson said the following is a valid DNAT configuration: …
    • over 7 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • Any ideas why i am not seeing any network data in the reporting ?

    Chris Demellis
    Chris Demellis
    Hi fellow Sophos users, installed UTM 9 a few days ago , love it ! great network traffic info , BUT now for some reason im not seeing any traffic at all on 2 NIC's ... i know eth 2 is a busy network and according to the pic below , no more traffic…
    • over 7 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • WAN Interface flapping

    ChrisBKA
    ChrisBKA
    Hi, i discovered that one of my WAN Interfaces keeps flapping. I set it to static 1000MBits FULL to avoid negotiation errors. but this doesn't help out either. The Question is: In which log can i see why the Interface is in error state…
    • Answered
    • over 7 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • HA Interface on MGMT Port?

    logan517
    logan517
    Hi, we have 2 SG650 and both machines are connected via port eth0 [MGMT1] to administrate these. At the moment our active-passive cluster ha interface is on etc2 [A1]. Does something speak against it to switch the HA interface onto eth1 [MGMT2]…
    • over 7 years ago
    • UTM Firewall
    • Hardware, Installation, Up2Date, Licensing
  • Can static routing be done on SOPHOS SG Series Bridged Interfaces ?

    kennethwong
    kennethwong
    I have got 2 sites connected via L2 Point to Point. Site A which the SIP Server, and other VOIP Call server resources are located Site B which all the IP Phones and Clients are located i am unable to do static routing on the bridge interface. The…
    • over 7 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • IPv6 not recognized in web interface

    Michel Zehnder
    Michel Zehnder
    Hi I can see an IPv6 added, and the default gateway has been set dynamically. I can ping6 to the internet from SSH. However, the UI does not recognize the address, and I cannot do anything on the Prefix advertisement page (it complains about the interface…
    • over 7 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • Odd DMZ behavior?

    iTechThingsSeriously
    iTechThingsSeriously
    I setup a DMZ on a separate physical interface on a SG330; however, I can still ping hosts on all our internal networks. The only way for me to get this to stop is to disable both "Global ICMP Settings" and "Traceroute Settings" under the Network Protection…
    • Answered
    • over 7 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • Issue faced with Up2Date - interface got deleted post reboot

    Dev Tiwari
    Dev Tiwari
    We are facing issue whenever we perform firmware update, while running Up2Date patches getting installed successfully and post reboot we lost access to devices. In the above case 1. We can access device by using console/ HA interface i.e. ETH0 only…
    • over 7 years ago
    • UTM Firewall
    • Hardware, Installation, Up2Date, Licensing
  • Utm 9 home edition setup

    Karan Anand
    Karan Anand
    Hi Guys I am new to UTM's and trying to learn. I have installed UTM 9 on vmware workstation. Please guide me for network adapter settings. I've tried all the settings bt none of one worked for me. if i setup two network interfaces for my vm machine…
    • over 7 years ago
    • UTM Firewall
    • Hardware, Installation, Up2Date, Licensing
  • QOS definem values and limit aplications

    Paulo Carneiro
    Paulo Carneiro
    Hello all! O would aprecciate some help from the comunity concerning UTM 9 for home. My setup at home is a ISP internet line with 14MB download and 1MB upload, we have a couple of computers where the kids play, a Apple TV for media streming like netflix…
    • over 7 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • UTM interface to connect to on-the-premises router (behind the firewall) with a WAN IP

    B.R.O.
    B.R.O.
    On this diagram we have several objects to look at WAN IP = 12.12.12.35 LAN IP of UTM = 8.8.8.8 WAN IP of Router behind firewall = 12.12.12.36 LAN IP of Router behind firewall 8.8.8.4 How would you configure Port 4 to plug a cable from the…
    • over 7 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • Interface-Monitoring

    TheJ0ker
    TheJ0ker
    Hallo, wir verwenden eine SG330 mit UTM 9.411-3 bei einem Kunden. Als UPlink-Interface ist unter Anderem an eth4 ein LTE-Router angebunden, welcher allerdings nur passiv agiert. Nun gab es gestern Wartungsarbeiten seitens des ISP und das Dashboard zeigt…
    • over 7 years ago
    • UTM Firewall
    • German Forum
<>