• L2TP over IPsec from IPv6 client no connection

    filippb
    filippb
    Is there a setting that needs to be turned on? i can't get a client with IPv6 connected to L2TP over IPsec. in the log it says the connection is coming from IP 0.0.0.0 Thanks
    • over 7 years ago
    • UTM Firewall
    • VPN: Site to Site and Remote Access
  • Nach Umstellung vom ISP (vermutlich auf DS-Lite) keine Verbindung per DHCP mehr möglich (Vodafone Kabel Deutschland)

    Snaker
    Snaker
    Hallo zusammen, ich versuche es möglichst kurz und bündig zu formulieren, was genau das Problem. Dazu muss man die bisherige Konstellation aber kennen, die wäre folgende: Kabel Deutschland Vodafone Anschluss 100 Mbit mit fester IP. Der Router ist ein…
    • over 7 years ago
    • Sophos Firewall
    • Discussions
  • Do we have support for country Group using IPv6?

    snlmauricio
    snlmauricio
    Do we have support for country Group using IPv6? if don´t. do we have plans about it? Regards,
    • over 7 years ago
    • Sophos Firewall
    • Discussions
  • IPv6 DNS-Auflösung funktioniert nicht seit Update 9.504-1

    renehoehle
    renehoehle
    Seit dem Update 9.504-1 habe ich Probleme mit der Namensauflösung unter ipV6. Vom Provider (Telekom) sind V6 Nameserver vergeben. Diese werden auch angezeigt. Ich kann auch per Telnet darauf connecten das funktioniert alles wunderbar. #dig -6 @2003…
    • over 7 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • IPv6 broken

    dms
    dms
    I run a UTM and have had stable, native ipv6 across 3 internal vlans for quite some time. However, after some of the recent firmware updates, the UTM now refuses to connect the wan interface via ipv6. Nothing else has changed, my utm config has been stable…
    • over 7 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • IPv6 from ISP and IPv4 internal subnets

    Mr. Pi
    Mr. Pi
    Dear members, My ISP changed gateway connection address from IPv4 to IPv6. My internal network works as IPv4 subnets. I will be grateful for tips or link to turorial on how to reach IPv4 outbound traffic to Internet over the IPv6 WAN interface on Sophos…
    • over 7 years ago
    • Sophos Firewall
    • Discussions
  • IPv6 ICMPv6 not working

    Patrick Faust
    Patrick Faust
    Hello everybody, I have a dual stack IPv6 connection with a static IPv4 and IPv6 prefix from my ISP (Vodafone Cable Germany). Both static addresses are successfully deployed to my XG via DHCP from the ISP. My contractual Prefix with my ISP is…
    • Answered
    • over 7 years ago
    • Sophos Firewall
    • Discussions
  • IPv6 and DNS without additional DHCP and DNS Server

    TimBenkert
    TimBenkert
    Hello, I'm running Sophos UTM 9.503-4 on a pcengines APU board behind a FRITZ!Box Fon WLAN 7360. The UTM is configured as exposed host on the Fritz!Box and the UTM provides DHCP and DNS for my LAN. There are no other DHCP or DNS servers and I don't…
    • Answered
    • over 7 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • IPv4 and IPv6 licensing

    Rick Kragt
    Rick Kragt
    Hi there! I am using Sophos Home UTM for a while, but i have one question.. normally i had no trouble with licensing, but since i also give IPv6 addresses, i'm running out of the 50IP free home license usage... sometimes a client connect with IPv4,…
    • over 7 years ago
    • UTM Firewall
    • General Discussion
  • IPv6 (Zustandsloser Server) wie zuordnen?

    renehoehle
    renehoehle
    Hallo an alle, ich habe gerade mal eine Frage, die sich aus einer Gegebenheit gerade ergeben hat. Ich habe meine Präfixe als "Zustandslos" bekannt gemacht, was ja an sich den DHCP umgeht und die IPs von den Clients errechnet werden. Das funktioniert…
    • Answered
    • over 7 years ago
    • UTM Firewall
    • German Forum
  • IPv6, Webfiltering and Netflix

    BLS
    BLS
    There appears to be an issue with IPv6 and Netflow where on any device, the thumbnails refuse to load, this is the scenario: - 1. IPv4 only and web-filter - All netfilx images load as they should, starting a program works instantly. 2. IPv4, IPv6…
    • over 7 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • IPv6 not recognized in web interface

    Michel Zehnder
    Michel Zehnder
    Hi I can see an IPv6 added, and the default gateway has been set dynamically. I can ping6 to the internet from SSH. However, the UI does not recognize the address, and I cannot do anything on the Prefix advertisement page (it complains about the interface…
    • over 7 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • IPv6 Setup -- fe80 gateway assignment and NAT?

    Daniel Rubin
    Daniel Rubin
    Ok I've been working with IPv6 on the UTM.... It now passes all of the tests, but it shows my UTM external WAN address as my IPv6 address when I go to test-ipv6.com or ipv6-test.com -- it doesn't show my computer's address. On my computer, it shows…
    • over 7 years ago
    • UTM Firewall
    • General Discussion
  • Client Authentication Agent only logs in with IPv4

    Gaustino
    Gaustino
    I've installed Sophos XG Firewall Home Edition to protect my home network. I am using IPv4 and IPv6, since I have some devices requiring IPv6 to be active. I've setup some firewall rules so only authenticated users are allowed to access the internet…
    • over 7 years ago
    • Sophos Firewall
    • Discussions
  • IPv6 6in4 Tunnel over PPPoE session Doesn't Work Properly

    ChrisKnight
    ChrisKnight
    I've tried this with both SFOS 16.01.2 and SFOS 16.05.0 without success. I'm trying to use an he.net tunnel over a PPPoE session due to the lack of DHCPv6 Prefix Delegation support. The tunnel appears to be working partially. I've lowered the he.net…
    • over 7 years ago
    • Sophos Firewall
    • Discussions
  • NTP errors after enabling IPv6

    AdamTyler
    AdamTyler
    Getting tons of the syslog info warnings after enabling IPv6.. Sophos UTM 9 bug? 2017:01:16-13:39:36 fwhostname-1 ntpd[27946]: unable to create socket on eth4 (2175) for 2001::1#123 <-----IPv6 address redacted. 2017:01:16-13:45:04 fwhostname-1 ntpd…
    • over 7 years ago
    • UTM Firewall
    • General Discussion
  • [INFO-142] OSPF daemon (ospfd) not running - restarted

    AdamTyler
    AdamTyler
    I get this fun little notification about once an hour since turning IPv6 on.. As far as I can tell the UTM 9 doesn't even support OSPFv3 (IPv6 version of OSPF), wonder why turning IPv6 support on while OSPFv2 was running would break it.. Hmm... [INFO…
    • over 7 years ago
    • UTM Firewall
    • General Discussion
  • My Sophos UTM 9 IPv6 epic fail

    AdamTyler
    AdamTyler
    Hello all. This is a quick and dirty post after spending most the day with a Sophos UTM 9 attempting to get IPv6 working. I am beginning to think my approach may be misinformed. My goal is to have two different IPv6 networks, one private that never changes…
    • over 7 years ago
    • UTM Firewall
    • General Discussion
  • IPv6 Router Advertisement seems to fail

    Weatherlights
    Weatherlights
    Hello I have a strange issue with my UTM. For now reason it seems like the Sophos stops broadcasting it's router role for IPv6. It simply stops routing IPv6 Prefix and even with a static assignment it is not routing any IPv6 Traffic anymore. However…
    • over 8 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • IPv6 Accept Router Advertisements only for Gateway but no delegated prefix

    MartinSeener
    MartinSeener
    Hi, at moment, we got the UTM 9.355 and want to use IPv6. We receive Router Advertisements like this one below and i need some help understand them. As far as our Carrier told us, we have to manually set the WAN-side IPv6 for our WAN-Interface (which…
    • over 8 years ago
    • UTM Firewall
    • Management, Networking, Logging and Reporting
  • IPv6 Tunnel Broker 6in4

    TylerTodd
    TylerTodd
    I'm trying to get IPv6 via Hurricane Electric. I have it up and working - to a point. All outbound traffic works and and inbound traffic works as well. The only hiccup I'm having is that I can not perform a trace route from the XG or the clients behind…
    • over 8 years ago
    • Sophos Firewall
    • Discussions
  • RE: IPv6 through 6rd for internet WAN

    DavidOkeyode
    DavidOkeyode
    The XG does support 6RD from my testing (and I have done a lot of testing). You might have misunderstood my explanation in the video. Again this comes back to the issue not being with the XG but with people's understanding of IPv6 and its operations.…
    • over 8 years ago
    • Sophos Firewall
    • Discussions
  • RE: IPv6 through 6rd for internet WAN

    Kenneth AndréKrøgenes
    Kenneth AndréKrøgenes
    After some further testing I've come to the conclution that the Sophos XG really does not support 6RD for WAN the way the ISP delivers it. The details in my first post is everything I need according to the ISP. The way you've demonstrated the tunneling…
    • over 8 years ago
    • Sophos Firewall
    • Discussions
  • RE: IPv6 through 6rd for internet WAN

    DavidOkeyode
    DavidOkeyode
    Kenneth AndréKrøgenes No problems. Basically, your LAN network will come from the delegated prefix. This can then be broken down to form multiple subnets. I'll make a clearer video on this once I get the chance :)
    • over 8 years ago
    • Sophos Firewall
    • Discussions
  • RE: IPv6 through 6rd for internet WAN

    Kenneth AndréKrøgenes
    Kenneth AndréKrøgenes
    @DavidOkeyode Thank you for a very informative walkthorugh for 6RD. I have calcuIated my ISPs IPv6 network to be 2a01:79c:d5a7:735c::/60 and I am working on getting my ISP's default IPv6 gateway address. I do however notice you have cut out a very…
    • over 8 years ago
    • Sophos Firewall
    • Discussions
<>