Good day! I am having to setup a new network for an IP based phone system our organization does not control. The system needs to work over the IPSec tunnel between two sites running Sophos XGs. Because we don't have access control over the system, we…

SSL VPN issue Hello!! I have actualy a problem, I configured a À SSL VPN. My all setting is perfectly configurate. But when I test in my PC I can't connecte. If I test in my Samsung Note10 + with OpenVPN the connection is successfully but no internet…

Dear i am using 2 Sophos XG 135 - 1 For HO ( Australia ) 1 for BO ( vietnam ) both side connected via VPN IP sec tunel and it working great Follow this KB https://support.sophos.com/support/s/article/KB-000035798?language=en_US i have successfull…

I was wondering if in one of the next MRs in SFOS 18 it was possible to include one or both of the following changes: Including the VTI interfaces in the pull-down menu options for PING diagnose * When pinging with an internal interface, letting…

Hi All, I have a question about routing web traffic through an IPsec VPN. Here's the situation: Site A: Sophos XG with Web Server Protection licensed. Site B: Sophos XG without Web Server Protection and a dumb web server (ventilation unit) which…

I've recently set up a site to site between two XGs using IPSec. Problem On the CLI of site A's XG, I can't ping site B's LAN interface. On the CLI of site B's XG, I can ping site A's LAN interface. Other Facts Local service access for…

Ok, something that I've easily done many times on all of our UTMs. I have a new IPsec tunnel I built to a 3rd party. We are just accessing a single remote (198.0.0.2/32) host configured in the tunnel, but it needs to be accessed from 4 different hosts…

Guten Tag, ich habe einen VPN Tunnel zwischen einer Sophos XG 85 w SFOS 17.0.8 und einer SG 230 hergestellen. Der Tunnel geht online und soweit ist alles gut, nur wird traffic von der XG 85 w Seite nicht in den Tunnel geroutet. Ich habe in der…

Hi everyone! I'm setting up a lab for a customer PoC and I'm having trouble routing from On-Prem connected by IPSEC Site 2 Site Azure VPN to users dialled in via Azure IKEv2 Point 2 Site and vice versa.. Please see below: The on-prem server can…

Hallo zusammen, ich probiere hier schon ewig rum, evtl. kann mir von euch jemand einen Tipp geben. Welches Problem habe ich? <Client> -> <SITE A> -> <IPSec-VPN> -> <SITE B> -> <STATIC EXTERNAL IP> -> <Backend> Ich müsste vom Standort A über den VPN…

Hello, i have this nasty problem and i don't know to bang my head anymore. I cannot reach a device on a remote site from HQ site and another remote site via IPSEC. Topology: Introduction: i have 4 XG in 4 location and a HUB-SPOKE IPSEC VPN setup…

Here is our current setup - We have 3 sites, remote site is 192.168.0.0, HQ is 192.168.1.0, and a site to site tunnel to a hosting site where we access one host (192.168.216.3). The tunnel is configured between HQ and the hosting company, that connection…

Hello, We have an IPSec site-to-site VPN which is Active and Connected but we're not getting any inbound traffic, we can't ping from the Remote to any Local IP's but it works the other way around. Tried a bunch of different combinations of Policy…

Have setup SSL Remote VPN Connects fine and is able to access the LAN of the XG What i want to achieve is to be able to access IPSEC VPNs to other remote LANs via the XG. I have tried setting the VPN settings to use as default gateway and adding…

Have 2 sites connected with an IPSEC tunnel 192.168.1.0 - head office (SSL VPN 10.81.234.0) 10.1.10.0 - branch office (SSL VPN 10.81.235.0) when a user connects via ssl vpn they can't communication to the other site. What do i have to add in order…

We have a new IPSec tunnel established between our XG and a remote Cisco site. It looks like this: XG Remote Site 172.20.0.0/16 10.1.1.150/32 The tunnel is up, both inbound and outbound rules were set up: VPN-LAN (172.20.0.0/16) Any / Any…

Hello, as I already realized ist with SSL VPN, I like to send all client traffic via IPSec over the UTM. Does anyone have a sample configuration? Thanks

Hello Guys, here is a quick and dirty illustration of the current setup: The hosts sit all in de same internal subnet 192.168.150.0/24 and the remote offices all have there unique subnets. Till now. A new customer have the same Subnet as an already…

Hi, I've got a site to site VPN working and I can ping from either side but I don't see any option to route internet traffic as well as network traffic. I also couldn't find any documentation on the subject. If someone could please enlighten me on how…

Hi All, I made a video on how to configure OSPF across an IPSEC Tunnel using the Sophos XG. Hope you find it useful. I'm also open to video suggestions if you have any :) www.youtube.com/watch

Hi There, I manage a branch office, and was having trouble connecting to websites hosted by the head office (over an IPSEC VPN) when web filtering is on. Branch office running UTM9 is connected to IPSEC to head office (not sure of their equipment) and…

Hi all, im at the end of all my ideas so im asking for help... I have two sites with UTM, working IPsec tunnel. At point A there is Public WAN IP and thru this interface is reachable also subnet 172.20.60.0 which is kind of "management subnet…