Hi, is there any option to extend column Names in Rules and Policies section, so we can see full name of each rule, rule group ? We need to use filtering to make it clear, otherwise it is one big mess. How u guys workaround this lack of feature ?

Hello all, I have created two new zones on my Sophos and would like to have communication between them. I have already created the firewall rule and selected zone 1 as source and zone 2 as destination. Unfortunately I can not get there into the other…

Dear All, Would like to seek for your help, i have the following firewall rule from Sophos 17.5, i would like to create the same rule in Sophos version 19.5, how do i create it under firewall rule + NAT rules for the following ? any help would be…

By default, the agent's port is 161 and the manager's port is 162, but many internet operators here in Brazil leave this port blocked, which makes it impossible to access the firewall's SNMP. How to change this default port?

HI, if it possible to enable/disable firewall rules via cronjob. The customer wants certain firewall rules to be deactivated every evening, the rules are activated manually upon request. I was able to do that on the SG, it was possible to turn on…

I'm trying to access an FTP server located in our Server Zone from our DMZ Zone (passive mode). When the server initially responds from port 21 to the initial connection, the connection is being blocked by Sophos XG - "FTP-bounce attack" but I have…

Dear All, I currenty running a virtual sophos FW in esxi with version 19.0.1 MR-1-Build365, and i already have another internet gateway which using palo alto, this sophos i want to act as Internet Proxy, in client computer its will need to have below…

Hello I have SOPHOS XG 19.0.1 firmware which i have upgraded version due to facing issue, one web which was working earlier suddenly stop to work and not getting access from the public network. I took support from tech, but they also not able to understand…

I'm migrating from Sophos UTM to Sophos XG ( SFOS 19.5.0 GA-Build197 ) and I cannot get my work machine, which uses MS Alwys-on-VPN, to conmnect when I switch between the UTM and the XG. On the XG: Port 1 is the LAN, Port 2 is the WAN. I have a work…

Hi there, I'm struggling with a problem that i don't really understand. In the DMZ is SFTPGo App, which provides a FTPS server. From external (NAT) through port 21, works TLS or unencrypted connection. From internal, although test LAN DMZ to SV is set…

After adding firewall rule to allow protocols , Bitdefender vpn clients on desktops still fail, live logs show no blocking of the protocols after the rule addition also? Has anyone experienced this issue previously and resolved it?

I have a synology server at home with adguard home. I created the rules in sophos xg (I think I missed something) because when the lan connection uses the ip of the synology server where adguard is, I can't access the website, when I change the dns server…

Hello I have searched and can see others have this issue, however none of the solutions have worked for me so far. I have followed the steps at https://docs.sophos.com/nsg/sophos-firewall/19.5/Help/en-us/webhelp/onlinehelp/AdministratorHelp/RulesAndPolicies…

Hello, I'm using XG135 with latest firmware SFOS 19.5.0 GA-Build197. My fw rule for outgoing traffic to Internet like this (rule ID 10): When I look into NAT rule, I see that the SNAT rule for outgoing traffic to Internet has the number of usage…

Public user are accessing local URL (http://117.x.x.x:3000) successfully, but internal LAN user (192.168.16.10) want to access by public IP , but cant access URL : http ://117.x.x.x:3000, what is the solution,

Hi, I need to tidy the unused rules (63) However can I just delete them? As I am not sure whether these are connected to other processes, it's the same for the NAT rules.

Hello, I've been detecting a strange behavior on an xgs 2300 (SFOS 19.0.1 MR-1-Build365) for a few days. At first the connections of some PCs to an IP seem to work but then I start to log a series of errors such as "Invalid traffic" (I attach a screenshot…

Dear Sir, I have biometric device which connects to WIFI and IP is released by DHCP in sophos XG 310 firewall. It does not ping to this IP from LAN network, nether i am able to access this device using this dhcp released IP address from browser.. How…

I have multiple pieces of software behind my Sophos that try to reach out to their public servers (usually http port 80), but always return an error stating the host failed to respond. In general, the devices behind this Sophos don't have any problems…

I have 2 Vlans on my network, 1 for voip and one for manageing devices such as swithces and accesspoints. until recently i was using a different router and that worked fine however sincce switching i am unable to access the vlans on th email network…

Disclaimer : This information is provided as-is for the benefit of the Community. Please contact Sophos Professional Services if you require assistance with your specific environment. Table of Contents Overview Log Viewer Firewall (Invalid…

This is on the XG106w (SFOS 19.0.1 MR-1-Build365) I have a client that has a Pix-Star digital photo frame that can't see the internet when connected to WiFi. I knew something was blocking it but didn't know what, so I had created a bypass rule for the…

Hi! I'm new here and this is my first post. I'n running SFOS 19.5.0 GA-Build197 and I have an app (Dlubal RFEM 6.02.0045) being blocked by Sophos XGS 136. In Log Viewer, I can not locate any logs related to this blocking. I know that Sophos is…

I have the XGS 136 firewall, SFOS 19.0.1 MR-1-Build365 , I have a problem connecting the local network to the DMZ . Users get invalid traffic. and the server ( Odoo ) stops responding , and this issue happened more with users who have Laptop HP -15- DY…

My goal is to install a telephony server in the LAN. This server must be accessible from the internet with a number of protocols here (PRO_Starface). To prepare this I created a NAT rule and a firewall rule to access this server from internet. Just…