Hello community,
We have recently transitioned from the SG 230 UTM to the XGS 2300, and we've recreated all our firewall rules from the UTM for the new XGS device.
All NAT rules were also recreated.
While DNAT rules are functioning perfectly,…
Hi team, been stuck on this one for a while now.
we have an on prem server, and cloud servers, both networks are connected using Amazon VPC VPN.
all services, features etc work perfectly fine when in the DHCP dynamic range, i can ping all servers…
Als ehemaliger Astaro/Sophos Partner finde ich bis heute die UTM um längen besser als die XG mit der UTM beschäftige ich mich seit 2008.
Aus diesem Grund war die Motivation sich mit der XG zu beschäftigen nach Stunden immer wieder dahin. Jetzt ist die…
Hi,
we are using SOPHOS-XGS-3300 now we have 2 internet lease line connection we are planning to add one more lease line any issue we will faced if we add more than 2 .
TATA-500MBPS
ACT-300MBPS
after upgrade ILL
TATA-1GBPS
ACT-300MBPS
JIO…
I have an external website: outside.org
I can access it internally via https://outside.org or https://outside.org
We are creating forms on the website. I can access it internally by https://outside.org/?form=template, but I cannot access it via https…
Hi there.
I'm trying to deploy this XG330 into my home network with 10G expansion card for WAN and LAN (3gbps fiber internet).
If I test through the modem I get 3.2Gbps in and out.
If I put traffic through the XG330 I get initially 700mbps then…
Hi all,
Hoping I can get pointed in the right direction!
We have an opportunity to provide networking for a managed office, as part of this they want to be able to offer the protection that the XG can do. - That is simple enough and I can create VLANs…
Hello community,
we are using a Sophos XG 310 for quite some years now.
Since the beginning we had two WIFI's configured. One with Bridge to AP LAN and one as Separate Zone with Hotspot system.
I never had to create a special firewall rule to get…
hello,
i have two ip subnet on port-1 Lan interface (Vlan), the host pc can able to ping the Firewall Gw ip but from FIrewall to Host ping not work, i checked the Local windows firewall its already turned off.
Now 100.0/22 subnet not reach to 15.0…
I have to seperate two networks using the same LAN Interface running XG in natest version with 1 phyiscal NIC bound to LAN and 1 physical nic bound to wan. The need is that there is no access form Private Network IPs to Company Network IPs and Vice Versa…
Hello everyone this is my first post and i need some help
i have 4 routers sim card edition In a branch of the company and i have sophos firewall in my network ,i need to let firewall connected and control it how to ?
This is Our Furewall detais Model XGS87
WAN Link goes down Every 10 to 15 minutes
It is installed on a dedicated Intel Hardware
Current Network Setup - 1. Airtel Fiber Link Router with Static IP lands on Fiber Link Router configured in Bridge mode…
Hallo zusammen,
ich betreibe eine XGS 116W und würde gern einen zweiten Webserver hinter der Firewall erreichen können.
Aktuell läuft schon einer tadellos.
Aaaaaber .........
Sobald ich einen zweiten hinterlege (Richtlinie, Nat, Host usw…
Hello Community,
Hoping for some sort of advice as I'm pulling my hair out with this one. All I want to do is forward UDP 1194 to the NAS 192.168.15.9 to get OpenVPN to work.
Here is the NAT rule. Port3 is the external interface with a public IP from…
My XG 125 is blocking me from reaching hulu.com, and also blocking google shopping when it redirects me to googleadservice.com. As a test, I temporarily bypassed the XG, and I could get to those sites. So I know that the XG is blocking those sites. Then…
we configured Sophos XG in MTA mode. We need to restrict access to Port 25 for SMTP traffic to specific terminals only. Currently Port 25 is accessible from all LAN networks
Hi team,
I wanted to bring to your attention some issues we've encountered following a recent firmware update on our XGS2300 device.
After the update, we are experiencing difficulties with the VPN connection—it is not working as expected. Additionally…
Hello Please be informed that i have an ERP which is accessible locally "LAN" but when i tried to access from outside im not able to, however i set up a DNAT rule please find below the screenshot it is in french language
i set up port forwarder on the…
I am creating a new firewall rule and want to add a linked NAT rule to it, but the fields for adding source, destination and other parameters are greyed out:
That warning which is visible in the printscreen does not make sense to me - can someone…
Servus liebe Leute,
mich würde interessieren warum diese (siehe Screenshot) Firewall Regel ausgegraut ist bzw. was diese bewirkt!?
Über Antworten würde ich mich sehr freuen.