Browse By Tags

Hello Have a problem with my Sophos CS110-48P not being able to ping the default gateway which is an XGS2100. We only have a switch and a firewall. The switch receives DHCP from the XGS2100. The switch cannot ping anything, neither the internet nor…

Hello everybody, I'm currently trying to find a way to enable some clients to be started via WoL. It appeared to be working, but since we enabled 802.1x to finalize the testing behind the switch, it does not work as it did before. For HP Switches…

Just trying to figure out how to diable a port on a Sophos switch. I can't click on the port to change it. I do not see an obvious place when logged into the switch as admin to do so either. Any help would be appreciated...

I am confused. How is Sophos switch managed from Central? I added some port settings, VLANs, including Voice VLAN settings, but those settings are not available on Sophos Central at all. Did I miss something? For example, on local switch interface…

I have a dream machine managing ubiquiti aps, is there a certain port configuration on the Sophos CS210 to allow the ubiquiti ac pro 6 aps to handle ssids with different vlans?

Hello, As a new user of Sophos Switch, I recently purchased a CS101-8FP to power up an APX. However, the distance between my two access points and the Sophos POE switch is 130 meters. Therefore, this model will function as an extended POE or not. However…

OLa! alguem poderia me ajudar a configurar o protocolo 802.1x no switch sophos? fiz dessa forma Aqui padrão que já estava Servidor RADIUS add mas alguma configuração que estaria faltando ?

Hi All, I'm not a network eng. so please be patient. We have a 2x virtual UTM 9s recently upgraded to the latest firmware ( 9.711-5.1 ) and wanted to know if there is a way to check or manage ports through the web portal. So basically where we can…

I have a total of 5 WAN IP's. I have a SG135 running 9.405-5 I have my LAN running off the LAN port. I need to configure one of the ports eth4 through eth7 to run an IP camera using one of my available WAN IP's. How can I do this? I have a security…