Browse By Tags

  • Is the Realtek RTL8125BG 2.5Gig RJ45 NIC Card compatible with the Sophos XG Firewall OS

    A very good day to you Sir I hope you are safe and well I would like to kindly ask if a Realtek 2.5Gig RJ45 Network Card is compatible with the Sophos XG Firewall OS Is the Realtek RTL8125BG 2.5Gig RJ45 NIC Card compatible with the Sophos XG Firewall…
  • Is the AMD Ryzen 9 5900HX CPU Compatible with Sophos XG Firewall OS Software

    A very good day to you Sir I Hope you are safe and well I would like to ask a Question regarding a AMD RYZEN CPU Compatibility with the Sophos XG Firewall OS Software Is the AMD Ryzen 9 5900HX CPU Compatible with Sophos XG Firewall OS Software…
  • Sophos XGS Home support for Intel I211-AT Nic and Intel I225-V Nic

    Hi, I am looking into buying hardware for a Sophos XG Home solution with the SW-18.5.1_MR-1-326 firmware. The options I am considering at the moment are the following 2: HSIPC J1900 4c; 8 GB RAM; 128 GB SSD; 4 * Intel I211-AT Nic HSIPC J4125 4c;…
  • Sophos XG grace period

    Hello, We have lot of XG 85 end XG 105 devices that comes to the end of life, so we bought a new ones. But the deployment of the new appliances on all branches offices may takes months. So, I'm asking if there is a grace period for 3 months or if…
  • XG105Rev3 RAM and SSD Upgrade

    Hi there, i got an XG105Rev3 cheap from Ebay and I reed that I have to Upgrade the RAM to at least 4 GB to Support the newset Firmware v18.5. I just ordered a Stick of 8 GB to Upgrade it to the whole potential. My question is: can i replace…
  • Sophos Home XG may be reducing my internet speed

    I have a 500MB connection. I connected to my Sophos XG installed on an old Intel computer with three NICs. When I test internet speed, it is reduced to half the bandwidth. the XG is on default settings so I don't have any specific firewalls or anything…
  • Test installation of XG firmware using an old 220 hardware

    Hello, I currently have a SG230 with v9 firmware and a very old unit that is turned off. This is a 220 UTM. I would like to use this old hadware for some tests with XG firmware. - Do you think that this hardware is compatible with XG firmware? …
  • environment friendly Hardware Packaging XGS and APX

    I like the packaging of the XGS. At least the small size unit 136 came in 100% cardboard box. Well done. The APX still come in a Box surrounded by plastic foam and even inside the white and blue "Design" box there is just an other type of plastic foam…
  • Sophos home xg running on HP t730 with pimped ram and m.2

    had this box in testing for months about 6 connected to my paid for sophos cloud, and my 2 other machines running full fat sophos intercept-x. first few builds on versions of 17.5 and early 18.* it would be stable. now on SFVH (SFOS 18.5.1 MR-1-Build326…
  • SFP copper reliability in XGS87?

    I get the impression that the SFP port is more for HA applications, but it now appears that our perfectly-sized XGS87 will be a port short if we get a second ISP. So the thought arises about buying an SFP copper module (say like https://www.fs.com/products…
  • XG Home

    can I use a small form factor pc and do not need an OS with it? what are the hw specs I would need? thanks
  • Software Firewall Intel Processor licensing hardware limits

    Dear Community, Anynone have an idea regarding Sohos xg firewall software licensing I want to use more than 10 intel based hardware devices which license should I need. Thanks Sibtain khan
  • XG 86 couldn't be turned on?

    Hi, The device XG86 I believe was blue and hang when i received this device. Currently, I am tryna access and reset to default but it couldn't be turned on even after plugging in and out. Its constant on red colour. No matter I plug in the power,…
  • Mellanox ConnectX-2 Ethernet adapter stops working

    Hi all, Seem to have an issue with my Sophos XG home firewall thats become worse following the latest update (SFOS 18.5.2 MR-2-Build380) Its running on a HP SFF desktop PC with 6GB ram, and a 4th gen i7. Using the standard Intel onboard NIC for…
  • SFOS 17.5.8 MR-8 image

    Hi to all, Is there a place where I can download image for SFOS 17.5.8 MR-8? I have auxiliary device whith brocken ssd. Because primary is on firmware 17.5.8 MR-8 I plan to install on new SSD same image, connect HA and then update to 18.5.
  • XGS107 SSD life

    My XGS107 has been running for 2 weeks and I found its SSD life has dropped from 100% to 98%. Is it expected? I tried to reduce some logging but it doesn’t help much. It is going to be end of life in less than 2 years XGS107_SN01_SFOS 18.5.2 MR-2…
  • XG Home edition on SG210 Hardware

    HI, i was thinking about installing SW version of XG SFOS on my SG210 but i've encountered some issues on installation, seems that i cannot install SW ISO in Sophos Hardware, i need to install Software ISO on it because i need an Home License. Can…
  • Unexpected reboot with no apparent cause.

    hello guys, We work with the XG210 model, recently there was a sudden reboot of the firewall, it simply restarted. We found no problems in your power supply, the event was restricted to the firewall, only it restarted and this was not scheduled. …
  • CR50iNG to Sophos upgrade

    Hi, Just found our Old Cyberoam 50ing in the office and wanted to use it at home but it seems EOL now. can I upgrade it to Sophos Home ? or any other which is free. It is on Firmware - 10.6.6 MR-6 any help would be appreciated.
  • UTM 9.7 not seeing NICS after BIOS Update.

    I have a Fitlet2, with the Intel I211 Ethernet ports. My Sophos UTM has run fine for over 1 year. Recently I upgraded the BIOS to ver. 0.46.01.00 After the update, it appears the Sophos UTM 9.7 does not see or load the drivers for the ports as the final…
  • SFOS 18.0.6 MR6 Hardware Installer ISO

    Does anyone happen to have a copy of 18.0.6 MR6 for the hardware appliance? I am trying to restore a config taken on 18.0.6 MR6 but it will not restore onto 18.5.1 MR1.
  • LAN Interface not negotiating 1000FD

    Hi all My LAN port does not negotiate anything more than 100FD. If I force the LAN port to 1000fd, the port goes dead. I have connected the Firewall to a Switch that supports 1000fd and other devices negotiate 1000fd without any problems. Looking…
  • How to install Sophos UTM on a Lanner 7541 device

    Installing Sophos Home Edition UTM on a Lanner 7541C-E01/A firewall appliance I bought mine on eBay for $70 with $13 shipping. www.ebay.com/.../114305668920 1. PREPARATION Make sure you have a SERIAL cable to connect your laptop/desktop to the RJ45…
  • Issue with my SOPHOS 310 Firewall (Sudden restart)

    Hi to all Sophos Support, I would like to ask your help regaridng the issue with my Sophos Firewall. Just today around 3:05-3:11AM (UTC+08:00) (philippine time). I don't know what caused the problem. Upon checking all the logs in the Sophos Firewall…
  • Sophos XG 550 : Swap memory reached 99% exceeding the threshold of 95%

    Hi Today our internet connection get intermittent disconnected and checked the log found these several lines : SWAP memory Usage reached 99% exceeding the threshold of 95%. Our system using 2 Sophos XG-550 using HA, both the primary and auxiliary…