Browse By Tags

Hi, on APX530 it is possible to set The 5 GHz Channel to 100 and above. Is this not possible on the APX320? Thanks for your help Greetings Andreas

Hi, ich have created multiple Wireless Guest Networks. There were 3. I removed 2 of them. Everything was removed accept the Wireless Interfaces under ->Network->Interfaces Is it possible to remove them??

Hallo, ich habe an einer Sophos XGS 116 zwei Access Point angeschlossen. Ich habe Clients im Netzwerk die sich mit dem falschen AP verbinden und dadurch eine sehr schwache Verbindung haben. Besteht die Möglichkeit in der Sophos, den Clients fest…

Hello. I have 3 new APX 320 which are stuck in a firmware update loop. XGS3100 (SFOS 18.5.2 MR-2-Build380) AP Firmware: 11.0.018 Messages: [<SN>] sent firmware /content/apfw/APX.uimage to device, releasing connection. 18004 Successfully sent…

Hello fellow Sophos XG users, I have a strange problem that I need some help with. The problem corresponds to the following discussion: Wifi Seperate Zone Performance - Discussions - Sophos (XG) Firewall - Sophos Community The installation is as follows…

hello, if I want to migrate an AP from a SG to a XGS, do I have to remove it from the SG or will it also be recognized by the XGS if it was not removed in the SG. Thank You!

Hi There, I am having a different issue in my network, Whats-App calls working on LAN via Whats-App desktop app but not on Sophos Wireless network on cellphones. I am having a XG2100 Firewall and APX320 APs.. Please suggest a solution.

hello, what is the best way to migrate an APX 120 from an XGS to Central so that I can then manage it via Central Wireless? Thank you very much!

Hello, i have a big problem. At the Moment i have a migration from SG UTM 9 tu Sophos XGS. Everthing works fine, except Wireless. I disconnected the old Sophos UTM and Connected the Sophos XGS to the LAN. The APX AccessPoints immediatly appears…

Hi folks, in my home environment i have a Sophos XG home V18.5 mr2 with 2xAP100 and 1xAP55 accesspoints controlled via the XG Firewall. When i now moving with my devices (iphone, ipad, macbook, notebook,...) around my house, then the devices should…

I am having issue on 18.5 MR1 with AP15. Wi-FI goes down and only reboot is the way to get wireless lan again. Looking at the wc_remote.log, here what happens when the wi-fi stacks: 30>Jan 21 08:58:56 A4004F40C263B03 hostapd: wlan0: STA a0:d0:dc:2c…

Hello everyone, after restarting the two APX 120 that we are using, a network loop is caused. If I disconnect the AP´s from the network, everything works fine again. I have replaced all cables and used different ports. They are directly connected to…

I have been handed a task to add a Ubiquiti Nano AP to an existing XG125w network to extend range for an office that's too far away from the XG to get good service. DHCP is provided by Domain controller on the network Goal is for the Unifi AP to be…

Hello, I have a problem and I have no idea where to look, maybe someone can give me a tip. I have an XG115 to which an APX120 is connected. The AP is a member of a MESH and serves as a root AP (5 Ghz). The AP also broadcasts the client SSIDs in 2.4 Ghz…

Hello, AP Firmware 11.0.016 is now available. Where are the release note, please ?

Hi I am using sophos xg v18 utm We have multiple access points in our network. We have applied WPA-psk security on the same.The problem is that the key gets leak to all employees very easily and they connect their personal devices snd use internet…

Dear community, I have the following setup: in a LAN a XG 115 firewall is managing two APX 530 access points. Both access points are in different zones, firewall rules allowing only certain machines in the LAN to transmit data to the connected Wifi…

We have a new office with an XGS 2100 which is connected to our central UTM SG via RED. We have created a bridge on both sides for the office LAN and multiple WiFi networks. All traffic is routed via the central UTM. (UTM is default gateway) Our WiFi…

Hey guys. I would love to get your opinion and help on this. I have XG135W and four APX120. With machines connected directly via ethernet has no speed issues. However any wifi devices are experiencing 1/4 of the speed. As a test, I connected google…

I have connected my APX120 to the XG and created a new wireless network, basically same as the default sophos. Bridge to AP LAN. Now I want to add another network with its own subnet, that will have access to my LAN on Port3. So I created a vlan connected…

Hi, I'm sharing fiberglass internet (bit expensive) with my neighbours, and we have installed XG home in a PC. We have created username and password for each user and installed quit a few access points and some routers to the network. But now we have…

Hello...We upgraded an XG 115W to 18.5 (Latest build on 10/1/21) from 18.0.4 and our wireless network that is setup for Bridge to AP LAN no longer works. It connects to the wifi and authenticates but it no longer hands out an IP address. We have an internal…

i am a home license user, and i am looking to replace the AP i use currently as it is a old Cisco device. Can i manage and configure an APX 320 device thru XG on MR2 code? i see a few on Ebay and Amazon with the POE for ~$400..

Using the XG Firewall Basic Guest Access Hotspot Password of the Day Feature, On the guess access login page it Says Password of the day ___________ Sophos Firewall For Administrationve questions please contact SomeUser@SomePlace.Com That…

Hey guys, does somebody know where the voucher databse is located ? Or does someone know, how to determine when a voucher code was created ? Kind Regards, Max