Good Morning
We have an issue where the firewall seems to lose data or packets when pulling large reports from our https server internally. We have disabled all filters. When connecting directly to the server with a LAN cable, we pull the reports…
I'm evaluating Sophos XG in a virtual environment with a bridged configuration, an interface br0, with one physical port attached to a router and the other attached to the core switch.
100% of the traffic between the router and switch is 802.1q-tagged…
I have a guest WiFi network running on VLAN40. I'm trying to create firewall rules for this network but when I select the VLAN interface (#Port8.40) in Source networks and devices, it has no effect at all. I can define the network subnet here instead…
Clients on VLAN are able to obtain a DHCP lease from the Sophos XG210 but absolutely no other traffic is passing or showing any activity in the log.
Client is unable to ping anything.
Firewall rule is:
Accept Source Zone: VLAN Destination Zone:…
Hello and Good Day Everyone,
I am having one more issue with xfrm interface, at one of my BO the ISP have provided ILL on vlan interface. I've setup IPSec Tunnel with VTI / xfrm interface. the Tunnel is showing up at both ends (Ho & BO). xfrm interface…
How's it going !!
Currently we have configured a Vlan with sub interfaces as in the example:
That is, it is required that the network of the 172.82.11.0/24 segment has an exit through the gateway 172.82.11.1, however it goes through the default…
Hallo Community,
ein Kunde plant sein WLAN-Umgebung (administratiert über die Wireless-Protection der Sophos UTM) auf weitree Standorte zu erweitern. Gegenwärtig sind zwei weitree UTMs and die UTM im Hauptstandort über SSL-basierte Site2Site-VPNs angebunden…
Hi,
I have been struggling to get transparent birding to work with VLANS properly.
I have two ports bridged, one as LAN and one as WAN in bridge mode. VLAN 1, which is native seems to be working ok. I have another TAGGED vlan, vlan 3, which kind…
I am struggling with getting my interfaces fully functional. I am currently configured on the Sophos as follows:
Port 1:
VLAN 10 - 10.10.10.1
DHCP Pool for that subnet
VLAN 100 - 172.16.20.1
No DHCP (MGMT)
Port 3:
VLAN 20 - 10.10.20.1
…
Hallo zusammen, ich nutze schon lange die UTM SG. Ich habe nun aktuell zum testen eine RED SD20 angebunden, das hat soweit auch alles gut funktioniert. Verbindung steht. Allerdings habe ich wohl ein Verständnissproblem. Ich habe nun extra den Standardmodus…
Moin.
Habe eine Frage bzgl. Kommunikation zwischen 2 Netzen auf meiner UTM9.7
- Server LAN (VLAN) - Clients im WLAN via Sophos AP
Da ich gerne meine Smart-Home Geräte in einem separaten Netzwerk unterbringen möchte, habe ich einen Server aufgesetzt…
Hi,
ich habe vor 4 VLANs auch per Wlan zu verteilen.
Die VLANs zum verteilen sind VLAN 10, 20, 80 und 90 mit den jeweiligen IP-Bereichen 192.168.10.0/24, 20.0/24, 80.0/24 und 90.0/24
Ich habe ein Bridge-to-VLAN Ethernet-Interface erstellt auf…
Hey guys,
I have inherited this infrastructure from a previous Sysadmin. I'm in the process of putting all our printers into a dedicated Printer-VLAN. Some of our printers are at a neighboring building where we currently don't have a direct network…
I have several Sonoff Smart Plugs. I assigned them to VLAN, with only WAN access. Sonoff has an app, that allows LAN mode, which means I can access the devices without internet. My mobile, which is connected to internal home network, is separated from…
Everytime I create a new VLAN, I cannot receive a valid IP.
Here's an example:
Here's the configuration for my newly created DHCP for VLAN 130
--------------
--------------------
----------
Sophos Router is connected to our Core…
Sanity Check: Cabling dual ISPs into separate VLANs and then plugging each one into the Sophos WAN port.
Hey All,
How are you doing? I wanted to reach out and ask my fellow network engineers at Sophos for a sanity check on my setup. I have a cluster…
Hi,
Trying to get my RED to passthrough a local VLAN but doesn't seem to be working.
Having the RED in switchport mode SWITCH obviously doesn't pass it through, however local network works perfectly.
However when i change the RED to switchport mode…
Hello All
This is my first time on sophos community discussion....so be nice :)
We are about to migrate our firewall solutions from Cisco ASA to Sophos XGs. We are testing the new XGS firewalls before we implement them into production and I have had…
Hi All
I've created a vlan on our firewall and created a zone and allowed the device access, ive created a firewall rule from the zone to the wan but i cant access the internet on that vlan, do i need to create a nat rule for this to work? (i see create…
Hi,
I installed Sophos SFOS with XG18 on my 2 SG210 Appliances, becuase we need to have more then 1 DHCP-Relay.
But even with Firewall XG the IPsec Site-to-Site won´t work.
I configured it for 3 VLANs like mentioned here: https://docs.sophos.com…
Hallo,
ich hatte vorhin ein Thema zum Vlans über RED-Tunnel routen, leider gab es keine Antworten und Gespräche mit mehreren Experten führten auch nur zu Fragezeichen
Ich habe nun also noch mal das IPsec angeschaut und eine Problemanalyse betrieben…
Hello,
I am attempting to VLAN guest wifi traffic. I know I have the switch configured correctly for sure. I think I am missing something in the firewall though. I have a Sophos XG330 (SFOS 18.5.1 MR-1-Build326). I have VLAN 10 in the firewall and…
Hallo,
ich habe ein Problem.
Ich möchte über einen Site-to-Site RED-Tunnel VLANs übertragen.
Der Aufbau sieht so aus, auf jeder Seite befindet sich eine SG210 mit UTM 9.709. Seite A ist der RED Firewall Server, Seite B ist RED Client.
VLAN 1…
In one of my previous posts , I set up several virtual interfaces on my primary F1 interface.
They are both effectively a gateway IP in their respective VLANs. The rest of the devices on the network can safely reach their respective gateways(the virtual…
