Hi all,
I have a XGS116 and created a LACP LAG to the L3 core switch. The LAG is working as I can ping from the firewall the core switch and it´s all VLAN interfaces. The strange issue I have is that I can´t ping any other device "behind" the core switch…
Hi All
I worked on
SF01V (SFOS 17.5.10 MR-10.HF062020.1)
I created 2 vlans with IDs 10,20
vlan 1 is 10.10.10.1/24 under port1 (lan)
vlan2 is 20.20.20.1/24 under port 1 (lan)
and thin i created DHCP for every one
Vlan1 10.10.10.10 - 10…
Query: I have Cisco 300-52 Manage Switch VLAN 1 -- 192.168.0.1 --- WORKING FINE VLAN 2 -- 192.168.100.1 -- WORKING FINE DHCP is through Sophos Firewall i have created the VLAN 5 on the same switch & assigned the one port to vlan5 created the DHCP in firewall…
Hello
I have a dobut with the log viewer in Firewall sophos XG: how can I see the traffic generated by the configured VLANs?
I don't see any menu option to log the traffic of the rejected or allowed VLANs.
the scenario is that I set up a bridge…
Hallo zusammen,
ich habe nun schon einige Zeit im Internet recherchiert, leider keine passende Lösung/Erklärung für mein Problem gefunden.
Nun hoffe ich durch meinen Beitrag von Eurem Schwarmwissen zu profitieren
Wir haben folgende Anforderung…
cant figure out what I'm missing...
XG125
I have APX120 connected to port5. tagged vlan is turned on.
port5 192.168.5.1 3 vlans are on port5
vlan5 - 192.168.55.1
vlan10 -192.168.58.1
vlan20 - 172.18.58.1
APX120 is tagged vlan5
my wifi…
I have connected my APX120 to the XG and created a new wireless network, basically same as the default sophos. Bridge to AP LAN.
Now I want to add another network with its own subnet, that will have access to my LAN on Port3.
So I created a vlan connected…
First of all, apologies if this is a really stupid question, I'm still learning the XG Firewall.
We're migrating from a Sonicwall and I'm trying to reproduce the DHCP config we have on the XG. It's simple enough:
I've got range #1 replicated, easy…
I have a XG running 18.5.1 MR1.
This XG has 2 physical interface bridged together with multiple VLANs.
Each of these connections go to a managed switch via said Bridged(Trunk) connections.
I have a Server in VLAN 5 that is connect to one switch…
hi all,
under "network > interfaces", when i add a "vlan" ie give it an ip/subnet/vlan tag no etc and bind it to a physical port i can see it under vlans page
when i go back under "interfaces" it just says connected but NA under the ip details, why…
Sophos XG430 firewall, multiple VLANs and two ISPs are working in our network shown in attached picture.
I want to use ISP2 (Wateway1) for VLAN21, VLAN24, VLAN24 and ISP2 (Wateway2) for VLAN16, VLAN17 internet traffic , is it possible we use both gateways…
I currently use SophosXG with two connected Netgear Nighthawk access points. I would like to start using the VLAN configuration, but am searching for the right walkthrough to set this up on both SophosXG and connected netgear APs.
Hi,
I have 2 physical interfaces and both are lan zones. They should be separate networks. There should be no traffic between both of them.
I have 4 Sophos APs on interface A. There should be Wifi bridged into lan A.
Before I ordered switches with…
Hi Team,
Need to segment a remote branch network using VLAN.
My current setup.
HQ -> XG210 build 18.5. With already configure VLANS. It's also the DHCP server for the VLAN network.
-> VLAN attached to remote RED interface/Hardware with the necessary…
Have I seen it right, that die Feature 'Peer administration settings' under HA is not working if my main Interface is an VLAN Device?
The VLAN Interface is not in the list of selectable interfaces. Only the parent LAG device (which stupidly needs an…
Hello,
Anyone using Windows Deployment Services (WDS) with Sophos XG210, using Windows DHCP server. Clients on one VLAN and the Servers on another VLAN?
Any step by step guide or tips? Pulling my hair out on this (almost bald!)
Hello people,
I have a question about PXE boot from Windows Deployment Server with XG210 in between, doing InterVLAN routing.
This is how it looks like
Windows Deployment Server (192.168.1.11/24) , Windows DHCP (192.168.1.10/24)
|------------…
Hi everyone. I have a couple questions. I currently run pfSense in my home network/homelab. I was thinking of maybe trying out Sophos XG. I have no problem with my pfSense it runs great but when I was checking out Sophos it seemed to be more similar to…
I have a Guest VLAN on VLAN 100, attached to the Bridge on our XG. It's set to Masq out our primary WAN connection, but otherwise be blocked from any local traffic.
However, the packets seem to have issues traversing the gateway.
Looking at the Firewall…
Hi everyone…
I need help to configure Sophos XG Firewall and help with understanding how bridge and VLAN's work on XG(If they work) and how to TAG/UNTAG VLAN's…
There is requirement for 3 separated zones each with own VLAN, own DHCP Server and own…
Hi all
I'm still a bit new to Sophos XG, so apologies in advance if I'm not using the right terminology etc. Am running the latest firmware ( SFOS 18.5.1 MR-1-Build326) and the current WAN uses DMZ to enable me to add VLAN tagging as required by the…
Hi everyone,
i have some tests in sophos home xg v18.5 with vlans, my exemple is below:
dhcp:
then i have a dlink switch webmanaged
port1: go to Sophos
port2: go to pc
pc cannot obtain ip.
an you help?
Thanks.
We are trying to start with a ping to a VLAN. I have port 8 on my Sophos XG with an IP on the VLAN. That cable is going to a port on a layer 3 switch. We setup rules to go back and forth and setup routing for that network. When I hook directly into that…
Hello chaps,
Starting a new thread on strange SSH behavior. I was not able to connect to a switch in VLAN via SSH but I was able to connect to a HTTPS server on the same VLAN.
Noticed the XG210 Log viewer says Invalid packet/Invalid TCP state when…