Browse By Tags

I have 2 firewalls. Firewall A is a XG and Firewall B is an SG A ---- B IPSEC Tunnel On A x.x.x.x/24 can ping on B x.x.x.x/24 and vice versa However on the A side if you browse to the webpage of that device such as a esxi host or synology…

Hi We have to archive a little bit a special config. We do have multiple IP on WAN interface, we defined this with alias. As far as good. But now we have to bypass the traffic from one of these ip's direct to another physical port. No Filtering on…

I'm very new to networking and Sophos too. Where would one go to remap their domain name to a public static IP Address? Example: map rd.mydomain.com to IP 75.0.0.0 I am using Sophos UTM 9.0 Please let me know if the question is unclear. Thanks in…

Hi everyone, I know there are threads addressing Chromecast issues, but I have tried all of the suggestions in those threads and can't seem to get mine working with the UTM. My HP printer, cell phone, and Mac Book all pick up wifi just fine, but Chromecast…

Hello, during my quest to convert over our previous hardware configuration, non Sophos, I am unsure how to handle this issue. With our current ISP we have been provided 3 static IP addresses. Our main designated static IP has been setup on Port 2, along…

Our ISP is providing new service. I need to verify the following sample IP space assignment will work on a Sophos SG 230 running UTM 9.411-3: ** Sample IP space assignment: Interconnect block - 107.1.239.104/30 Netmask: 255.255.255.252 Internet…

Be careful with the update to 9.411. The update kills the config of the RED10 with static IPs! The REDs will act as DHCP-device after rebooting/firmwareupdate. This update killed 3 devices with static IPs - I had to put it in a router with DHCP and…

Hi Guys, Remotely trying to get a clients new Telstra Business NBN connection working through the Sophos SG105 they have had for 12 months on their ADSL2 connection. The main issue here is the supplied Static IP. If I change the Interface to Ethernet…

SFOS 16.05.0 RC1 I set up two DHCP on a 4 lan port micro pc, assigned one to port 2 (x.x.0.20 to .80) and the other to port 3 (x.x.0.131 to .200) I mapped the MAC of the ND (new device) to be connected in DP2 (DHCP Port 2) Static details and left…

Hello there We have here small network less than 50 IPs, all computers, servers and DVRs were connected directly to ADSL modem through unmanaged switch. I've decided to replace modem with Sophos UTM (free license) in order to increase bandwidth and…

I am attempting to learn Linux, virtualization and Sophos UTM all at once. Good news is I got Sophos XG UTM installed on a CentOS 7 (everything build) in a KVM with the min requirements. I have been able to configure a bridge and gateway with 2 NICs.…

Hi sophos community, a new day a new problem with my new xg 210 firewall with the latest mr2 firmware. I configured the wan interface with ip alias: I created the new business application rules with the non-http based policy template: …

[ Mod Note : Related KBA - Sophos Firewall: Static IP assignment for dual boot system ] I think this might be a bug, but not sure where the best place to ask/report it is. I assigned a static IP address to my primary Linux workstation (10.144.1…