Hello everyone,
I have two Sophos XG appliances up and running for a couple of years.
Both appliances are using a RED tunnel to connect to each other and routing is done via OSPF.
Currently I have added all local subnets to the "network & area…
We have a new office with an XGS 2100 which is connected to our central UTM SG via RED. We have created a bridge on both sides for the office LAN and multiple WiFi networks. All traffic is routed via the central UTM. (UTM is default gateway) Our WiFi…
I work for a healthcare provider. We are going to provide services for the schools in our county. I need to set up a small network (2-6 devices) inside each of the schools that can communicate with the home office. The school is providing internet via…
Hello,
i have sucessfully configured the RED20 Device to my XGS-126. I can reach any device, that is connected to my XGS Network. Now i need to configure the acess back to the devices that are connected to my RED Network. I can ping the RED20 Device…
Hey,
I,ve got the problem that I can not ping the RED device itself but all devices connected via this RED device. I have firewall rules in place to allow this ping cross these vlans.
Is there any specific setting in Sophos XG, like "Device Access…
Hello Guys
I have a Red 60 and I can ping it from Sophos XG135 but not form any laptop form the main office LAN.
I have even set the route_precedence to 1. VPN 2. SD-WAN Policy routes but it does not work
Could someone help me out with this…
Good afternoon all,
Recently I deployed a Fortigate firewall at our edge and replaced the Sophos XG 210 we previously used. However, I have a remote site connected via a RED device and rather than mess around with another box and IPSec VPN tunnels,…
Hi,
I got an brand new XGS2300 Cluster (active-passive)at on of our customers which six SD-RED 60 connected. When making changes to one of the RED tunnels (every tunnel has two VLANs in access mode, drop tagged associated) the update of the interface…
Hi Guys
i am looking for some guidance.
i have a UTM SG310 with 7 RED 15's linked all working fine, The internet provider has told me that i need to change the public/static IP address of the site as soon as due to an upgrade.
my Question is do…
Hallo zusammen,
ich habe nun schon einige Zeit im Internet recherchiert, leider keine passende Lösung/Erklärung für mein Problem gefunden.
Nun hoffe ich durch meinen Beitrag von Eurem Schwarmwissen zu profitieren
Wir haben folgende Anforderung…
Hi,
I have to add 14 RED60 devices for a customer
I have now configured 2 devices, and have exact the same problem on both devices.
After configuration it works fine, for about 2 minutes. After this time, I have a short down on LAN port (only…
Hi,
How can i set a Static Ip mapping on RED (I am using SFOS 18.5.1 MR-1-Build326)?
The RED is setup and working, on CONFIGURE | NETWORK | DHCP I can edit the DHCP server for this red, but there is no "Static IP MAC mapping" option (as exists when…
Hello all,
Am I missing something simple, as no matter which of the 5 REDs we have, any client behind them can't connect to the FTP server (port 21) on the main subnet.
I've tried several FTP programs (currently favouring WINscp) and they all "time…
Hi, I've problem UTM310 with RED60. the REDs (transparent/split) and another site i have sophos cyberoam
ICMP ping forward is enabled.
Ping from Client behind RED to internal is good and i can access any client but i can't access from side.
I check…
Hello all, looking for some help and guidance.
I have one office with a sophos xg and 4 remote sites using SD RED 20 units. All 4 SD RED 20 units are connected back to the XG using standard/unified mode. No issues with getting this all connected.…
HI
I would like to deploy RED at 16 remote sites, I would like to know if Sophos XG 135 ( which is our client existing firewall) supports RED-50. Thanks
Hello
I want to know if it is possible to publish 3 ports (8000,3000,3001) of a server connected to a RED50 in standard/split mode. Currently it is working configuring the RED50 in standard/unified mode, but as all the traffic goes through the UTM Firewall…
Hello everyone,
is it planned to install the Firmware Updates for RED and Access Points via Sophos Central? I have many firewalls where I have to logon and click on install. The possibility to install these updates with a time schedule would be nice…
We have 3 primary sites, they have XG125 and Custom hardware 4-core 6GB RAM boxes, all running 18.5.1.
There are 7 branch sites, each has 3 RED tunnels, to the main 3 sites above.
Ever since we upgraded to 18.5.1, it seems like when a Branch or…
Deutsch (english below)
Hallo zusammen
Wir haben in den aussenstandorten jeweils ein RED. Wenn ich den Drucker in einem RED-Standort oder vom Hauptstandort an einem RED-Standort über Windows verbinden möchte, erkennt er den Drucker nicht automatisch…
This topic was discussed here but I found a way to make it work. However, this solution causes something else very important to stop working. The following problem originally exist. Based on Sophos SFOS 18.5.1 MR-1-Build326 When creating a new hotspot…
Hi All.
Has anyone come across this before.
I had a RED15 device working fine on UTM.
I moved it to XG and it works fine.
Try move it back to UTM and it does not connect at all ?
Any ideas, its still working on the XG so I dont understand why…
Hi,
I'm trying to set up a reliable connection between two offices of the same company using RED tunnels instead of VPNs. There are limitations which are not relevant now, but the fact is that we can't use IPSEC VPNs and RED tunnels work fine.
This…
Hi Team,
Need to segment a remote branch network using VLAN.
My current setup.
HQ -> XG210 build 18.5. With already configure VLANS. It's also the DHCP server for the VLAN network.
-> VLAN attached to remote RED interface/Hardware with the necessary…
