Hi All,
I'm not a network eng. so please be patient.
We have a 2x virtual UTM 9s recently upgraded to the latest firmware ( 9.711-5.1 ) and wanted to know if there is a way to check or manage ports through the web portal. So basically where we can…
Hello everyone,
I am trying to get my NordVPN to work behind my Sophos XG firewall.
As of now, I managed doing so by opening the TCP connections globally. However, I would like to reduce this to the port 443 only.
Is there any way to do so?
…
Hi
I want to detect what program in a Windows PC with Sophos Endpoint is trying to access a service running at a specific port in other equipament in my network.
Its possible to do that with at Sophos Central, with Live Discovery?
We have a new XG running as a direct Proxy I have 2 sites I cannot access and non standard ports e.g. https://x.x.x:5601 and https://x.x.x:8182 I get the generic "Hmmm… can't reach this page" from Edge. The ports are allowed in Web proxy configuration…
Hello,
is this still the way to manage and search for IP ports today? Export definitions and then search with text editor... Seriously?
I really cannot believe it is not possible in late 2020 with V18 MR1 to filter for port number - only for a port…
I have a SSL vpn profile (PROFILE 1) through which majority of my users login remotely if required to access the LAN
For a small group of contractors i have created a separate SSL VPN profile (PROFILE 2), so they have access only to 1 resource (SERVER…
Hi, good day.
I have a router that has bandwidth control and ip groups, this is very usefull for me. From the router i take the Internet service to a port on my Sophos Firewall (its a dell optiplex server with 3 lan ports). This PORT 1, works on the…
Hey, Guys, Since a few days I have the problem that I cannot find and control my Sonos system via Spotify. Port shares are all set. However, a port share is always discarded and I don't really know why. The relevant log is attached. Maybe someone knows…
Hi,
my firewall is setup in route mode. By default, it bridges the LAN port and all spare ports into an interface calls br0. I can not delete this interface since I won't be able to access it anymore.
I am trying to set VLAN on Port1 and it won't…
Hi All,
I am fairly new to the world of "Sophos". I need some help in setting up a guest WLAN on a VLAN through my Sophos XG 330. I have several unifi switches deployed and then connected to them are unifi access points. (I do not have unifi USG) I…
Hello.
In CONFIGURE > NETWORK > INTERFACES, I can't see the MGMT Port, obviously exist physically.
This Port is usable? or is a decoration.
I have SFOS 17.0.5 MR-5
Greetings.
Hello @ll,
I would like to authorize one target service for one LAN source, and one IP destination without create an exception in client browser proxy list.
I've tried different way, but I think it's not possible in proxy settings directly. I don…
Problem, I currently am using a Sonic Wall TZ200 with a subnet of /23. I assigned ALL IP address's manually to every machine/device and ALL switches or unmanaged. I am moving from the TZ200 to a XG210. My problem is I am running out of IP address's on…
Hi Guys
i am trying to do some port forwarding on my newly install xg firewall.
i have look around the web and found this guide:
https://community.sophos.com/kb/en-us/122976
but i think this guide is from a different \ older version.
my port…
Hi,
I've noticed a while back that the Web Server Protection would notify the user if the IP + port they were trying to use was already used by another service (for example, the user portal).
Today I've hit a small snag trying to enable a server on…
Hello all,
My company uses Parallels Remote Desktop to access a remote app in the cloud and it is running on a specific port. Is there a way on an XG firewall to define traffic that the app / port uses and give it a higher priority above all other…
Hi,
today, i've got many IPS alerts with the source IP of UTM's LAN and WAN ports.
Is this normal?
Regards Meghan
P.S. The address No.1 in Screenshot 1 is the LAN IP of UTM and address No.2 is the WAN IP of UTM
Hi all,
I have an extensive Home Automation setup at my home, and i use Vera as my home automation hub.
However for Vera to work I've been informed by the Vera customer support to open multiple ports. These are their notes.
MMS: 443 Relay: 23, 232…
Hi,
I have got some very important Feature requests:
Please add Anti-Portscan feature for Sophos XG - https://ideas.sophos.com/forums/330219-xg-firewall/suggestions/19243372-anti-portscan
Please add download progress page for Sophos XG - https…
We have an application that uses a specific port range for TCP/UDP. For example port 48129-48137. If there a way to add this service and specifiy a RANGE of allowed ports it can connect on. Rather than a single port.
I´m trying to block SMB traffic. This has to do with the WACRY ransomware.
Im sure its an easy thing to do, but when im trying to add an firewall rule to block TCP / UDP. But i cannot edit the TCP / UDP to port 139. The "save" button is "grey".
Whats…
Good morning,
I'm facing problems to make my Sophos XG filter correctly inbound spam e-mails.
Does anyone have the correct ports where Sophos XG comunicate with Sophos Labs?
Best Regards,
Hello,
I want to switch the UTM 9 User Portal to use port 4433.
However, after setting the port in the Advanced settings, I get the following error when turning the User Portal "on": The TCP port '4433' is already in use by the port.
This is pretty…
really it's important to change the port number of SSL VPN, as some ISP block the default port!!, and i can see from the posts that too many people ask for from 1 year but no action yet, can any one please help for changing this port 8443
Hello!
I've recently upgraded from UTM 9.4 to XG at home.
On setup I set the default firewall policy to "Accept any service going to "WAN" zone, when in "LAN" zone, and coming from any network".
This allows for a bit much in my opinion, so I disabled…
