Browse By Tags

  • My guide will be better

    Hi, I have just confiuged HA as a networking layman an I think my guide will be better....just saying. I will post it via support once I have it in final draft

  • Very important information is missing

    Hi Team in the following article is a very important information missing: If you restore the backup, this configuration is lost! This is also for every other CLI command, which needs to be executed on both appliances. https://doc.sophos.com/nsg/sophos…

  • HA Failover Behavior - With and Without monitored Ports

    https://docs.sophos.com/nsg/sophos-firewall/19.0/Help/en-us/webhelp/onlinehelp/HighAvailablityStartupGuide/HAConfiguration/HARuntimeConfiguration/index.html#monitoring-ports Please describe the intended HA behavior (active-passive) if there are no monitored…

  • HA Documentation makes no sense

    Hey! This article is totally senseless. The initial device role of the auxiliary device has to be configured as auxiliary, not as primary!

  • How to connect Sophos SG125 for HA (active-passive)

    Hello, we have 2x Sophos SG125. Node 1 and Node 2. I would like to have HA (active and passive) but I dont know how to connect it right with ethernet cables. The only thing what I connect is from HA (Node 1) to eth7 (Node2).Can you help how I should connect…

  • HA configuration failes

    Hi, I'm trying to create a active/passive HA-pair running 9.705-3 on 2 hyper-v 2019 hosts. I've enabled MAC spoofing on the NIC's. One UTM is configured in HA Active/Passive, the other is on 'automatic configuration'. I can't get this to work. In…

  • Cluster Node Replacement - Keeping License Valid

    We are running a pair of SG310s in an active/passive failover cluster. Both of these units have reached end of hardware support so we need to swap out both nodes. In addition to this our licenses for features are also ending and we have a few days…

  • HA: Cannot initialize Active/Passive

    Hello folks I encountered a strange situation which I cannot resolve using backup/restore and/or clean re-install. The Setup I have a 2 node virtualized setup like in the attached simplified image. I'm using the home edition of Sophos UTM 9.405…

  • High Availability (A/P) with two Internet Links

    Hi, We are using internet link from two different ISPs to have redundancy. Both links are terminated in UTM through a single cable running from each ISP provided device. Now we are adding another UTM for HA (A/P) but as only single cable is running…
Unfiltered HTML