I am having issue on 18.5 MR1 with AP15. Wi-FI goes down and only reboot is the way to get wireless lan again.
Looking at the wc_remote.log, here what happens when the wi-fi stacks:
30>Jan 21 08:58:56 A4004F40C263B03 hostapd: wlan0: STA a0:d0:dc:2c…
Hello everyone,
after restarting the two APX 120 that we are using, a network loop is caused. If I disconnect the AP´s from the network, everything works fine again. I have replaced all cables and used different ports. They are directly connected to…
I have been handed a task to add a Ubiquiti Nano AP to an existing XG125w network to extend range for an office that's too far away from the XG to get good service.
DHCP is provided by Domain controller on the network
Goal is for the Unifi AP to be…
Hello, I have a problem and I have no idea where to look, maybe someone can give me a tip. I have an XG115 to which an APX120 is connected. The AP is a member of a MESH and serves as a root AP (5 Ghz). The AP also broadcasts the client SSIDs in 2.4 Ghz…
Switched from XG management of an APX320 to Sophos Central management. Things went pretty well. A couple of suggestions:
1. It would be nice to be able to bulk-upload static IPs to the XG's DHCP server. When I killed the VXLANs and added VLANs, it was…
Dear community,
I have the following setup: in a LAN a XG 115 firewall is managing two APX 530 access points. Both access points are in different zones, firewall rules allowing only certain machines in the LAN to transmit data to the connected Wifi…
Is there a way to create a vlan allow connected devices (via AP) bypass firewall?
My current SSID in Vlan has a different IP subnet from my home devices. There are times I want to connect devices that totally bypass home firewall. This setup doesn't…
Hey guys. I would love to get your opinion and help on this.
I have XG135W and four APX120. With machines connected directly via ethernet has no speed issues. However any wifi devices are experiencing 1/4 of the speed.
As a test, I connected google…
Hi All,
for our home I´m looking for a WIFI and Router solution and won´t give UNIFY a go.
AFAIK the XG Home can be used at home for free including all features. Does this also include the management of Access Points like APX120.
If so, what…
Hello,
Is there a possibility to query if a specific wireless client (e.g. MAC address) is connected to the network or a specific APX Access Point through an API?
Thanks
Robert
I have connected my APX120 to the XG and created a new wireless network, basically same as the default sophos. Bridge to AP LAN.
Now I want to add another network with its own subnet, that will have access to my LAN on Port3.
So I created a vlan connected…
Hi experts. I recently buy two new devices, Sophos FW XGS 136 appliance and AP530 wireless Access point. I am trying to put them to work togheter but not having success. I have registered I can manege Firewall va Sophos Portal, also same as AP (when it…
Just had our [EDIT per rfcat_vk, who pointed out original "APX 30" is not a proper model] APX 320 crash. Solid red light. Power cycled it (unplugged cable, it's on PoE) and it went to an odd green blinking cadence (I think faster than normal), then red…
I run SFOS 18.0.5 MR-5-Build586 on my own hardware at home, with an AP30 for domestic Wifi. I plan to upgrade my AP when a Wifi 6 access point becomes available.
Yesterday I upgraded my SFOS to 18.5.1 MR-1-Build326 to find that my AP no longer works…
Hello, I have XG (SFOS 18.0.5 MR-5-Build586) running with Sophos AP.
I am trying to get mDNS/AirPlay/AirPrint to work across the wired and wireless networks but it isn't working correctly. Connections aren't stable and repeatedly fail to see devices…
Hi Everyone...
I just installed Sophos XG Home on the Mini PC firewall appliance, and also I bought 3 units of Sophos AP15.
All AP15 status active and included in the same group. But only 1 AP15 is actively broadcasting the SSID, 2 APs are not.…
Hi,
At the moment we are running an UTM/SG310 firewall I am currently preparing a XG310 firewall for our company network. On the SG310 we had 8 AP55C connected. Yesterday I disconnected the SG and instead temporarily connected the XG to our network…
Hello,
my APX320X keep rebooting, after start it is getting IP from DHCP (separate DHCP server controller ) After that I'm able to ping the AP IP for 20 seconds, Led status is blinking red
after that it goes unreachable and this scenario continue…
Hi all,
Today Im writting because i have a question , my customer has a ACCESS POINT TRICOM , but i want to know if i can configurate the captive portal with this model.
Thanks
Hi Community!
The AP firmware 11.0.016 has been released for Sophos Firewall OS (SFOS). This pattern update has a fix for the recently discovered Wi-Fi vulnerabilities AKA FragAttacks. In addition to the patch, this update contains a few bug fixes to…
Hello, I have to upgrade an XG125w that manages AP100s for the wireless network to an XGS136w. Does the new XGS136w model support older AP100s? Is it possible to mix AP100 and APX120 on the new XGS136w? If I want to switch to the more powerful XGS2100…
Hi Team,
we are using sophos AP55C, We have 3AP but suddenly AP drops connections, and sometime its not switching connections from one AP to another.
please help me out.
Thanks in advance..........
Hi all
I have a challange for you guys!
I want to connect 1 Access point (zyxel AC1200) to my Sophos XG
for your information: I configured the port whre the access point is connected to like this:
i also configured a DHCP Server for this port…
Hello Comm',
i bought via eBay two used APX 120.
After a normal restart the APs are bricked and do not have any function anymore.
The Sophos Flash Tool ( KBA ) do not support APX 120 and the eBay-seller got no informations about the license…
