This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VLAN Tagging not working

 I have added 3 SSID's to my AP100C,

one with Radius and vlan tag 80,
one with WPA2 and vlan tag 80,
and one with WPA2 and vlan tag 1.

Only the last one is working ok.

The first two seems to connect ok, and the Radius authentication looks ok, but the clients do not get any ip adresses.

An AP from another vendor was placed on the same spot same switch port before and was ok



This thread was automatically locked due to age.