Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 11 subscribers
  • Views 16369 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

CDP-LLDP Info - Feature Request

DMR188

Would be nice to have LLDP/CDP information when clicking into an AP to see which switch port an AP is connected to for troubleshooting purposes.  We keep having AP's go offline and if we knew the switch port we could cycle the port real quick.

Thanks



This thread was automatically locked due to age.
Parents
  • 0

    Another use case for LLDP is on the UTM itself, to trace which switch port the UTM connects into. This would be specifically useful for the standby unit in a HA pair, which is otherwise untraceable (it doesn't generate traffic, and it has the same IP and MAC addresses as the active unit)

Reply
  • 0

    Another use case for LLDP is on the UTM itself, to trace which switch port the UTM connects into. This would be specifically useful for the standby unit in a HA pair, which is otherwise untraceable (it doesn't generate traffic, and it has the same IP and MAC addresses as the active unit)

Children
No Data
Unfiltered HTML