APX AP + XGv18 - Bridge to Ethernet missing from Access Point

Question

I'm setting up a XGv18.03 with two APX530 access points and noticed that when setting up "Bridged to AP LAN" when creating the SSID, the option "Bridge to Ethernet" does not exist for the access points as outlined by the following article: https://support.sophos.com/support/s/article/KB-000035549?language=en_US 
 Therefore there is no bridged interface created for the Wireless to be bridged to the LAN. Is this something new or is there something broken?

FormerMember · Accepted Answer

Hi ArtL , 
 Thank you for reaching out to the Community! 
 The KB article you linked only applies to the firewall models (XG -W series) with an inbuilt wireless module. 
 If you are trying to bridge the wireless network to LAN on the firewall model without the inbuilt wireless module, you just have to select option bridge to AP LAN. 
 Check out the following document for more info: Add a wireless network . 
 Thanks,

APX AP + XGv18 - Bridge to Ethernet missing from Access Point

Top Replies