Port forward not working

Question

Hello, 
 
 I cannot for the life of me get port forwarding working. Have read several guides and tried numerous conbinations but with NO luck. This was all working fine on V16. 
 
 I stumbled across something weird though 
 
 Its seem that trafic is going the wrong way in the port forwarding rules.......

I have filtered on rules 3 which is the RDP port forward rule but all i can see in the log is my internal 192.168.100.50 contacting the outside world..... 
 
 Am I misunderstanding something? 
 
 Regards 
 Jacob

deeptibhavsar · Accepted Answer

Hi Jacob, 
 We found , service has been misconfigured for Forwarding rule. 
 Service RDP and "Blue Iris" has been created with Source Port/Destination Port TCP (3389) / (3389), TCP (81) / (81) respectively 
 Those should be TCP (1:65535) / (3389) and TCP (1:65535) / (81). Please update that. 
 Other point, we have been already reported issue NC-22584, where with Dynamic WAN interface and Port dnat rule, after reboot of the appliance, it is not working on some environment. 
 That has been resolved in SFOSv17 RC-1. If you catch such kind of issue with Beta-2, you can disable/enable the rule, to be worked.

deeptibhavsar · Answer

Hi Jacob, 
 The behavior is from the XG release. The source port should be any, if you don't want to filter from Source IP Address, else it will work only when Source IP (Any), Source Port (3389) , destination ip is your appliance IP and destination port (3389). 
 
 Yes, for you service edit point, the JIRA id is already logged and tracking it via NC-22557 
 Regards, 
 Deepti