Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

  • XG 86W Wifi to Wifi

    I have new XG86W and I trying to get Wifi to Wifi connections working. One example would iphone to roku device. How do I accomplish this? Wifi to WAN for internet access seems to be working fine. Let me state, I am sophos XG newb, worked on old…
  • v18 MR4 - Wireless Clients finally listed in WPA2 Enterprise RADIUS authenticated SSIDs

    Hi, just wanted to report that we finally see connected wireless clients on our WPA2 Enterprise SSIDs with RADIUS authentication. This has never worked since we moved our APs (mostly 55c) from SG to XG. Now after going from MR1 to MR4 and also upgrading…
  • WiFi issues with Vorwerk VR300

    Hi all, well...how to start... I had UTM before with 2x APX740, 1x AP55 and 1x AP55C working fine with my vacuum cleaner Vorwerk VR300. After migration to XG, setting all new system, with exactly the same APs, SSIDs, security setting and so on,…
  • WiFi (AP55) slow or blocked after period of time v18.0.3

    I am continuing to work through all of the difficulties with v18. My latest issue is with WIFI. After a fresh power cycle of the AP55 everything works perfectly. After a period of time, the client connections become unresponsive. If you try accessing…
  • Sophos XG Home Edition on SG-115W. Wifi not working?

    I have a sophos sg-115w appliance and installed home edition xg on it. everything works except that the appliance wifi is not working. wireless protection on the XG UI is configured with wlnet1 hardware. But the SSID is not showing in WiFi. does the home…
  • Sophos APX radiation pattern. What is the correct orientation?

    Hi. Good day. Sorry for this noob question. I am a bit confused about the radiation pattern of APX access points. I came across some debate about "wall mount vs ceiling mount" so I search the Sophos APX documentation for the radiation pattern of the…
  • Unable to get optimal speed of 1gbps using XG135

    We are using Sophos XG135 and recently just upgraded to a 1gbps modem. ISP provider have confirmed that direct connection we are able to achieve close to 900mbps up and down. However, we did a speedtest for wireless connection, we achieve around 200plus…
  • Interface Lan Down/UP : ID 17813

    Hi, i have a request for all Sometimes i have my interface (Port 1) who Down/UP ==> Sophos ID 17813 My Port 1 Under this interface , i have 3 VLAN Conf VLAN (all vlan are the same configuration) When this appears on night,…
  • WiFi stops working after a few minutes upon an HA failover

    I have a pair of 230 (mix of SG and XG but same port configurations) running in an HA configuration. I also have 2 AP100Cs and an AP55. My network backbone is a pair of stacked Cisco SG-500s with PoE. I have the following for the port configurations:…
  • sagemcom @st3486 net modo bridge

    Boa noite, Gostaria de tirar 2 duvidas. 1 como faço para para configurar o modem sagemcom @st3486 net como bridge no Firewall XG. ? 2 como configurar um roteador da TP-Link como AP no Firewall XG ? Obrigado.
  • Fast Transitions on Sophos XG v18 MR3

    Since updating to v18.0.3 MR-3 and the corresponding AP firmware 11.0.014 we’ve noticed that the Fast Transition behavior has changed. IPhones, iPads, and laptops that once seamlessly moved from one AP to the other are hanging on to their original AP…
  • One network (DHCP) for both wireless and wired clients

    Hi everyone, I have two IoT devices that need connected both wireless and wired on the same network. Wireless and wired (connected to a dedicated port of the FW via a switch) clients must have the same IP adress range (so the same DHCP). How I could…
  • Wifi Enterprise with Radius

    Dear Team I Use Sophos Xg firewall and integrate it with radius server in order to use it for Wifi Authentication with protocol 802.1x for dynamic VLAN assigned and it working fine except that the users which connect to the wifi keep disconnecting every…
  • APX120 does not show up XG115w's pending AP list - I have read similar threads

    I added an APX120 to my small and very simple network, but it does not show on the pending list. Here are the details: Sophos XG115W SFOS 18.0.3 MR-2 APX120 running V2.3.1-5 I read the troubleshooting post and several similar threads. APX120…
  • Down/uP port after sent conf to AP

    Hi everybody , i have a BUG ? when a configuration sent to AP, just after it donw and up my port 1... My port1 has just my vlan for Data/VOIP/Supervision..... the user was connected by IPsec site to site and they lost their connection after that.…
  • APX 120 Rücksetzen fehlerhaft

    Hallo! Ich hatte bei 2 APX 120 (kein Controller Connect) versucht, diese auf Werkseinstellungen zurückzusetzen. Das Ergebnis war, das beide Access - Points keine Funktion mehr haben. Nach Anlegen der 12v bzw. POE leuchtet sofort die Status - LED…
  • Make XG85 work with Google Nest Wifi mesh

    Our VIP user with an XG85 home router wants to add the Google Nest Wifi mesh for better wifi coverage. I have searched quite a bit here and on Google but cannot find a clear example of how to allow both to co-exist. Has anyone done this with an XG?…
  • Is wifi supported for XG firewall on non-sophos HW?

    Dearest Sophos community and crew, In my spare time I am an IT manager for a small business. We have recently purchased and now run a XG-115w. Unfortunately I can't often be onsite. So when I am, I want to be ready to quickly implement a fix…
  • Access printer+scanner placed in LAN from WiFi

    Hi, I know this topic was discussed several times but I didn't found a solution in the forum yet. I use a XG106 (SFOS 18.0.1 MR-1-Build396) and several AP100c and APX320 access points. LAN has a different IP range than two of the WLANs have. This is…
  • Tunnel-Private-Group-ID

    Dear Team I am trying to configure dynamic VLAN using radius server with Sophos XG and Sophos access point and it works fine except for the VLAN id for each user I am passing the Tunnel-Private-Group-ID attribute from the radius through the firewall…
  • Friendly name instead of MAC address in wireless client list

    Hi, In UTM it is possible to set a friendly name for each connected wireless client. I cannot find this option in XG, is it possible at all? Regards,
  • Printers Can't see wireless network

    I am having an issue where all clients pc, tables, and phones can see the wireless no problems. But all my printers never see the wireless can't figure out why, is there something that needs to be done for printers to be able to see the wireless.
  • DHCP SCOPE GIVING IPS FROM WRONG RANGE

    Hello i just purchased this firewall and have the following setup I have 3 dhcp scopes: VLAN_500_SCOPE - 192.168.10.100 - 192.168.10.200 VLAN_600_SCOPE - 192.168.20.100 - 192.168.20.200 WFIF_SCOPE - 192.168.30.100 - 192.168.30.200 …
  • APX 320

    i am a home license user, and i am looking to replace the AP i use currently as it is a old Cisco device. Can i manage and configure an APX 320 device thru XG on MR2 code? i see a few on Ebay and Amazon with the POE for ~$400..
  • XG Firewall Home Premium HW-Requirements and CAPWAP Compatibility

    Hello togehter, i've a Wireless-LAN-Controller and NFGW Firewall in progrss from another vendor. Now, the XG home Premium sounds good, but there are to many questionmarks in my case :( Current Mode 5 CAPWAP AP's from another Vendor (all are in CAPWAP…