Hi All, for our home I´m looking for a WIFI and Router solution and won´t give UNIFY a go. AFAIK the XG Home can be used at home for free including all features. Does this also include the management of Access Points like APX120. If so, what…

I have connected my APX120 to the XG and created a new wireless network, basically same as the default sophos. Bridge to AP LAN. Now I want to add another network with its own subnet, that will have access to my LAN on Port3. So I created a vlan connected…

Hi, I'm sharing fiberglass internet (bit expensive) with my neighbours, and we have installed XG home in a PC. We have created username and password for each user and installed quit a few access points and some routers to the network. But now we have…

This topic was discussed here but I found a way to make it work. However, this solution causes something else very important to stop working. The following problem originally exist. Based on Sophos SFOS 18.5.1 MR-1-Build326 When creating a new hotspot…

I currently use SophosXG with two connected Netgear Nighthawk access points. I would like to start using the VLAN configuration, but am searching for the right walkthrough to set this up on both SophosXG and connected netgear APs.

Recently, there are a few reports from users that they could not access the internet even though the devices connected to wifi. Some are even failed to connect to the wifi. Both of the cases waiting for a few minutes or restarting the devices, things…

Hi, I have 2 physical interfaces and both are lan zones. They should be separate networks. There should be no traffic between both of them. I have 4 Sophos APs on interface A. There should be Wifi bridged into lan A. Before I ordered switches with…

On an XGS 107 using 18.5 MR1. When inputting a pre-shared key (or password) for a Wireless network, an escape character is added to the password. I can't find any notes on this in the help or in the forums. As far as I can tell, the two characters…

One of my clients has a XG115w installed in a rackmount enclosure. Since they use the this WLAN only for guest internet access there were no connection issues reported. However, I am wondering about the reliability of such a setup since the antenna is…

Hi all, Please someone can help me,we have only one firewall Sophos with details: Sophos XG210 rev.3 SFOS 18.0.4 MR-4 ________________________________ Hotspot Settings: Hotspot type: Voucher Voucher definitions: 3 month ,10 GB 1 month, 3 GB…

I've read conflicting info over the last several months about legacy wifi hardware support status. Would AP100C & AP15 be functional and manageable in a Sophos XG (not XGS) on sfos 18.5 mr1 or would they be inoperable? There is a large group of these…

Hello, I have XG (SFOS 18.0.5 MR-5-Build586) running with Sophos AP. I am trying to get mDNS/AirPlay/AirPrint to work across the wired and wireless networks but it isn't working correctly. Connections aren't stable and repeatedly fail to see devices…

Don't know whether this post is in the right place, or whether it needs to be in the Central Community Forum I'm trying to configure a Hotspot for Guest Wireless over Sophos Central for a bunch of XG/XGS Firewalls On the same Central Policy level…

Hi Everyone... I just installed Sophos XG Home on the Mini PC firewall appliance, and also I bought 3 units of Sophos AP15. All AP15 status active and included in the same group. But only 1 AP15 is actively broadcasting the SSID, 2 APs are not.…

Hi all. I've Sophos Home Edition successfully installed on a PCEngines APU 4D4 ( https://pcengines.ch/apu4d4.htm ) mini appliance, embedded with 2x Mini-PCIe internal slots and 2 SIM slots. I'd like to configure a WWAN connection using a Sierra Wireless…

I have a RED15W which was working fine, with WiFi. AP was active. Because the IP range assigned to this RED became to small, I changed the IP and Subnetmask. Changed the DHCP Server object on the XG accordningly. The built-in AP of that RED…

Hi, At the moment we are running an UTM/SG310 firewall I am currently preparing a XG310 firewall for our company network. On the SG310 we had 8 AP55C connected. Yesterday I disconnected the SG and instead temporarily connected the XG to our network…

Hello, May i know how to configure 2 SSID with 2.4 and 5 band under same network in Sophos XG86w so on client device will appear 1 ssid (2.4) and 2nd ssid (5) Thanks

Hello, I am attempting to create a WiFi network that operates the same as though you are connected to the local LAN. The guide I am following is; - https://support.sophos.com/support/s/article/KB-000035549?language=en_US However I am stuck at…

Hi, We have sophos XG 430 installed on our primises, and have wireless network created with Bridge to AP LAN mode, which is giving full upload and download speed of 100 Mbps without any issues. We have recently created another wifi network, in separate…

Hello, i get one XG 105wr3 from ebay to replace my old 120. I manage to install the SW 18 Version on it. Everything works but unfortenately not wlan When i install the hardware version on it, it works. Any have a idea how to get the internal wlan…

Hello everyone, I have a Sophos XG firewall, and an APX320 access point. The access point is in "Bridge AP to LAN" mode. At the network level, Port 1 is the LAN (which goes to a switch), Port 2 is the WAN. I am adding a computer to the network…

Hello, AP Firmware 11.0.016 is now available. Where are the release note, please ?

Hello all, I have two problems at the moment. We have an APX 120 attached to our Sophos XG. With the Guest Wifi I have the problem that I can successfully ping for example google.de from the connected computer, but the website is not displayed in the…

We purchased several APX 320X outdoor access points a few months back. We purchased them in anticipation for them to have added local XG management by now. I haven't heard anything about a possible release date for this feature. We are a Sophos Central…