Hi !!
im having a problem whit my SSL VPN´S, i have my SSL VPN whit the "USE as Default gateway option on"
In my NAT rules i Have my SSL VPN doing MASQ to original, and in firewall rules i have permitid the SSL VPN to access my LAN´S and the WAN on…
Hi,
first of all is it possible to use the internet on both wan ports? Like combine?
Secound, would it possible to combine both wan ports for ssl vpn? We have two providers which give use each 50mbit/s uploud, and sometimes we need more for remote…
I am facing problem to conect ssl vpn through windows 10 only two system when i was connection network connected successfully but when i try to surfing internet then....give me error "your conmection reset by "ip address" default gateway i will also scan…
hello,
we need to use both ssl authentication with radius/mfa for admins and no mfa for normal users.
ssl authentication servers are radius and AD.
when i (admin user) connect to openvpn, i need to use mfa but if i wait without validating mfa, i…
Hey Guys,
I have followed the guides for creating an SSL-VPN that authenticates through Active Directory.
When I have my laptop internal to the network and initiate a VPN connect it works fine. Connection is established. The logs show this.
However…
Just upgraded from 19.5.0 GA-Build197 to 19.5.1 MR-1-Build278 in hopes that this would be resolved.
The issue is mobile phones are unable to reconnect the SSL VPN when they roam between different networks, eg from a local wifi to mobile isp and vice…
Good morning,
on an XG router I have created VPN-SLL users, everything is ok, the VPNSSL users access the client LAN, but I can't reach a static route defined on the XG router, I checked the FW rules, the accessible networks in the VPN Policy, etc.…
Disclaimer : This information is provided as-is for the benefit of the Community. Please contact Sophos Professional Services if you require assistance with your specific environment.
Table of Contents
Overview
Pre-requisites
Editing SSL…
Hi,
I have a user using SSL VPN (Remote Access) to connect to the office.
This worked good over the last months, but we're now having strange issues:
After a short ( but undefined) period of time, he's unable to access any internal web resources…
I am trying to help a mac user to connect to our SSL VPN. Using the Sophos client connect app. It is not supported on mac according to sophos support. Sophos support sent me instructions on setting up Tunnelblick however as is often the case, the instruction…
Hello Sophos community,
I am trying to set up a szenario where I have to send IPsec Remote access traffic through a Site-to-Site IPsec VPN with 1:n NAT translation on a XGS Firewall.
It seems to work on UTM: Sending Remote access traffic through…
Hi Sophos Community,
We've switched from using the SSL VPN client to Sophos Connect. All configurations used for SSL VPN via the old client are now used with Sophos Connect.
For the most part everything has gone smoothly, only now some actions…
A remote vendor used his SSL VPN connection (login and OVPN file) in a VPN gateway. His goal is for various machines on multiple networks on his end to access my network through this VPN gateway.
The vendor is able to reach my network from the gateway…
we have to Dual WAN with static IP- refer to below screenshot
118.189.XXX.XX is the primary WAN IP address.
165.21.XX.XX is the secondary WAN IP address.
The problem is that SSL VPN is configured with the IP address 118.189.XXX.XX (Primary WAN)…
Hi,
is there any way to generate the "per user certificates" used for SSLVPN without logging in to the userportal as an admin? Users are AD users.
We have a big SSLVPN rollout and this would help us to do this much faster.
Regards,
Sebastia…
Hi everybody,
I have done an Update from SFOS 18 to SFOS 19 and since the Update I am not able to connecto to SSLVPN any more.
In CLI I can see that all incomming Packets are dropped for SSLVPN when running ( drop-packet-capture "port 1194").
But…
Hello,
we are currently testing 2FA with our XG v 19.0.1 and also some VPN changes.
Now every user has to download his personal config file from the user portal so he can connect. Is there a KB or something else where it is written WHICH option(s…
Hello,
We convert the configuration from UTM 135 to XGS 136 and we have one Problem with Remote Access SSL VPN and sNAT.
With the UTM we have a C2S SSL VPN for Homeoffice users to the main office (1).
The main office has 3 additional S2S connections…
So I have SSL VPN setup and working. I need to know if there is a way to create specific routes for VPN traffic. We have an internal application that resolves to a Public Range, but our internal router has a route statement to send that instead to an…
Dear all, We are struggling with the generated .opvn Connection files users can download from the user portal on the WAN ports for VPN we do not know and cannot find it in the online help, how they are created. our setting:
XGS 3100 Firewall, Firmware…
Did set up a SSL VPN connection (Clients are in the 10.81.0.0/16 range.. Using an iOS device as client and could connect to my network in the 192.168.1.x range.
Due to the fact that I'm not on the same subnet the application requires me to login again…
Hello. Ive got SSL-VPN on SophosXR Home. I wanted to make some changes and i just cant. its showing an error which is weird - false positive?
Red arrows are fields that i wanted to change
ERROR
Please guide me on how to map SOPHOS Firewall Public IP with Public SSL Certificate. Also, how to access Firewall with a Hostname instead of an IP Address