Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

  • AP100 C ACTIVE IN SOPHOS XG210 DOESN'T SEE IP CONNECTED

    Hi I've configured AP 100 C and at the first week of installation i can see the IP address of each connected device however right now i can't see any IP address connected. what is the possible solution
  • [SOLVED] Issues with APs

    Hello all, I've been experiencing some issues lately with APs configured as 'Bridge to LAN'. First time, I saw the APs as 'Inactive' on the firewall, since we were implementing POL on our network infrastructure I thought this was due to the dBs on…
  • Need some guidance on wireless setup

    Hi all, I am going to be deploying some AC55C's and need some guidance on what is the best method to achieve what I am after. I have a hub and spoke network connected with 5 different sites connected via Metro-Ethernet links, and an XG210 at the main…
  • Advanced AP Settings? Looking to set 5Ghz channel widths.

    I know from searching around here, that in the UTM you can set the channel widths of the AP's I have followed the planning guide to make sure I don't have adjacent cross talk. But I have a few of my AP's I want to limit their bandwidth to 20 or 40 MHz…
  • I am unable to get internet access on my Cisco WAP371 connected to my XG firewall.

    Hi, I have a Sophos XG firewall paired with a number of Cisoc WAP371 access points. The access points can be reached and configured on network, but connecting to the SSID does not allow an internet connection. Please help! I have DNS set to my domain…
  • Wireless Security - MAC Filter

    Hi Everyone, Is it possible to add multiple MAC host in Whitelist MAC filtering option. We have around 100+ Laptop. Adding all 100 MAC in one host is not possible from managing point and Sophos XG does not allow us to add multiple host. Regards…
  • WiFi Clients: slow speeds

    I'm troubleshooting a deployment of a wireless solution on a AP100 (9.0.001) hosted out of a XG125 (16.05.8). We are having a horrendous hit on the data rates when running through the wireless. While we see an average of 20/11 across the wired connection…
  • XG 135 Bridge LAN to Wifi

    I created wifi with option "Bridge to AP LAN" as per guide. This wifi does not appear in Network-->interface so I can create bridge with LAN. Anyone have any idea
  • Share network segment between wireless and wired

    I'm a bit of a newbie to networking, trying to learn (all I can do is configure NICs and forward a port on a consumer router, but I have an IT background). Here's what I want to do: I want to create a single subnet used by both a wireless network…
  • HomeUser: Sophos UTM 9 und 2 x Fritzbox

    Guten Morgen, als HomeAnwender für das folgende Szenario bin ich gerade auf UTM9 Home gestossen: ich bin fast schon leidenschaftlicher AVM Anwender, stosse aber nun an Grenzen. Ich suche eine funktionierende Lösung, Gast Accounts (Mobile Geräte) und…
  • XG125W - Wifi problem

    I am running on Firmware : (SFOS 16.05.6 MR-6) Is there any know issues with the integrated Wifi not allowing traffic for (LAN/WAN) ? I am experiencing a delay of IP allocation for up to a minute when a client computers connect to the WIfi. In the…
  • Cannot add detected Access Point as Rogue AP in Sophos XG 85 Firewall Wireless section?

    Through the Sophos XG 85 Firewall's wireless section I have been scanning for other access points around my location to add them to the rogue ap section. I've scanned and successfully added around a dozen 3rd party (not affiliated to my network or running…
  • Integrate Aruba WCL 7010 with XG 230

    Greetings, Trust you are doing well, We are building our network from scratch. For the Wi-Fi part, we are going to use Aruba WCL 7010. 4 VLANs created, each one for separate SSID. for example: 1- VLAN1: 192.168.1.0/24 2- VLAN2: 192.168.2.0/24…
  • Cannot connect WiFi with Firewall rules in place.

    I have a couple of Lenovo (Windows 10) tablets at home for the kids. They have their own user accounts on the XGFW but were not set up with Client Authentication on the tablets yet. When the tablets attempt to establish a WiFi connection they sit until…
  • Separating wireless in different subnet

    My network is as follows Modem > router with one wan port, one LAN port> switch I want to separate my wireless from my main network. Right now I'm using two unfi ap's Can this be done with only one LAN port? If so how? Thank you Brock
  • Smart Phone with xg firewall (software) How can I get out to the internet.

    Hi; Smart Phone with xg firewall (software) How can I get out to the internet. I can not make internete output via modem because modem is in bridge mode. Is it possible to do over the phone output with XGA firewall?
  • Question about access points at different sites

    So I have a hypothetical question. Right now we run a fairly traditional "hub and spoke" network where the spokes connect back to the hub via MPLS, and the XG sites guarding our uplink to the internet. So my question is, if I wanted to add some Sophos…
  • Wireless APC55c with XG310, TX rate for 5GHZ is slow

    Hope someone can help me out here. We are using AP55C with XG310 for wireless. We have had little noise around some machines are slow when connected to wireless. Only thing I can notice is when a client is connected to 5GHz network freq TX rate is 6.0Mbits…
  • Some Clients not Connecting

    All, I have an XG firewall with AP55 units, 2 of them. from time to time, certain clients will not connect to the wireless networks. they can see the networks and are prompted for keys, but wont connect. in the XG interface, I can see the clients…
  • SSO RADIUS with Microsoft NPS for Authenticating Wireless Ubiquiti Access Points

    Good Day, I'm trying to authenticate mobile phones and tablets (Android & OSX) so I can apply web filtering rules. I don't want to download and user the android/apple app so I’ve searched and found that it might be possible if I use SSO Authentication…
  • XG Inbuilt WIFI keeps dropping out -- have to reboot daily.

    I have a XG 125W running 16.5 MR1. When this was a UTM 9.4 device I never had wireless issues. As a SFOS device it is requiring lots of intervention to get the WiFi to work. Lots. I have to rejoin devices almost daily. I have to reboot the device int…
  • Wi-Fi connectivity issues - Wifi connection dropping

    I recently reset my Sophos XGW Firewall to factory settings after the V16 update. I wanted a fresh boot. Now all of the sudden, the Wifi service/connection keeps dropping and all my devices lose connectivity. Any ideas?
  • hotspot wit voucher doesn't appear

    i just finish the configuration of my hotspot with voucher authetification for the guest but the portal doesn't appear and the guest go directly to internet
  • How can we configure WLAN authentication on XG with AP30 to use AD credentials

    We can currently authenticate to the Sophos WLAN via WPA/WPA2 PSK but want to use Active Directory instead
  • Client Isolation not working on XG Home Firewall with AP55

    I have install a Sophos XG Home firewall with an AP55. I create a wireless guest network with following settings: Security Mode: WPA2 Personal Client Traffic: Separate Zone Zone: WiFi IP address: 192.168.235.254 …