Hello all,
I have a problem with the 3cx system at my company. I switched from a Sophos SG to the XGS (UTM210 to XGS2100).
The telephony works partly wonderful, but partly not.
I first have a DNAT rule that says that all required ports for the 3cx…
Hi!
On a Sophos XG 115 with v19.0, how can I set the quarantine digest of a user to include other email addresses of the user (not only his main address)? I can't find anything about this in the docs.
Is it also possible to send a quarantine digest…
Hi folks,
some questions for those in the know
1/. will the daily reports be fixed so they cover 24 hours
2/. will the classification/category function be fixed
3/. will IPv6 be brought to IP4 parity at the very minimum in preparation for a complete…
One of Our customers using Sophos XG 230 V 19.0.0 firewall and configured 03 WAN links (One for backup and Two for Active-Active Load Balancing) but after the configuration one of the Active-active links went frequently and sometimes it always indicated…
Hello
I have struggled for a while with this. And all while having serious network issues with Comcast. I have Comcast and AT&T as ISPs - and for background, I have forced their Internet cable modems / routers to have a base IP address in the 172.16…
Hi all.
I'm running Sophos XG Home Edition ( SFOS 19.0.0 GA-Build317).
Whatsapp Calls are being blocked,
I have no Web Policy or Application Control being used by Firewall rule.
Any services are allowed from LAN to WAN.
Can't see that anything…
Hi,
I'm using an Huawei Modem with LTE on wan1.
The Sophos XG receives the IP via DHCP.
Everytime when there is an IP renew it fails and the interface (wan) is offline until I login to the firewall and click on save in the interface config menu…
What I have setup is on a 125 running XG 19.0 . I have these interfaces:
eth0 LAN which shows 1000 mbps- full deplex/ connected
LANLAG/ LAG1 with 4 ports (eth2/3/4/5) in LACP mode on the LAN network zone. and it shows up in GUI as 4000 mbps full deplex…
We have 20+ Xg and XGS's deployed. We started pushing out the mentioned version updating from 18.5.3 MR-3 Build 408. The first 2 devices we updated had all kinds of VPN issues. Users could connect but the connection speed was garbage (less than 1mbps…
Hi everyone,
I just upgraded my old sophos UTM, to the new XG firewall (SFOS 19). Now I can't make my Plex server accessible from internet. I try to use de DNAT server assistant, but it doesn't work. Did someone manage to permit direct connexion for…
have a strange problem here with an XG cluster. On 07.06.22 there was a problem with the onsite NTP service. After the failure, which lasted about 5 minutes, some websites such as google.com can no longer be accessed in a browser because the certificate…
XG135/SFOS v19.0
Was working remotely when suddenly I could no longer keep RDP sessions running through the VPN. 100/100 bandwidth. Latency through the tunnel up to 4 or 5 seconds. Ping to WAN IP also ultra-high latency, so I figured something was up…
Hello, I am new to the Sophos community. I am starting with Sophos XG Firewall. I have a Sophos XG86 that was working fine with a SSL VPN site-to-site connection in version 18.0.5MR5 to a remote site. I upgraded the remote site to SFOS 19.0.0.0 GA (Sophos…
We have a ongoing issue with Sophos Connect 2.0 and IPSec VPN connections where DNS resolution is extremely slow at first and sometimes never resolves itself. For example a user connects to the VPN and then tries to open a network drive then gets a error…
I'm trying to figure out a issue we've had for a while using Sophos Connect IPSec connections. In general small file transfers (say 5Mb or less) from a client to a file server happen very quickly, within seconds as expected. But larger file transfers…
Dear all,
We have a problem contacting a subnet since the version 19.0 GA. When we are connected to the IPSEC VPN since the upgrade, we get INVALID TRAFFIC randomly, and not on all networks.
The problem only appears on networks that are connected…
Updated two XGs this weekend (June 4, 4PM) XG115, XG106) to SFOS 19.0.0 GA-Build317 . Since the update seeing and receiving alerts of random but continuous termination and re-connection of a Site to Site VPN between the two XGs.
Alerts:
VPN Log…
Hi,
I have an email alert saying that my RED was down. Its a RED 20 connected to my XG 125w Firewall running the latest v19 firmware.
I thought it would just show as down when logged into my firewall and viewing the RED interfaces but its actually…
Hi ,
is there any Option to block nordVPN , wasn't able to find any option in the Application Control .
For the most shady VPN Provider are blocking options available. We highly need to block any kind of shady VPN ´ s specally nordVPN !
We are…
It may be a coincidence, but just after upgrading to 19.0 our Remote VPN users are unable to download or upload to server files over 1MB. It is throttled or something and times out. And the remote user has to disconnect the VPN and reconnect. Users are…
I am managing a nas (Unraid) that doesn't have permanent IP, or Dynamic IP. In order to manage the device, I installed Openvpn-client onto the NAS, and put my Sophos' remote SSL VPN config on Openvpn-client. The client can now connect to my firewall,…
Since the transition from 18.5.3 to 19.0, the throughput between the WAN and the LAN has been extremely slow.Tests on NPERF show a throughput around 3Mb while normally I am at 300Mb.
My ports are in self-negotiation but even if I force in 1000Mb the…
hi
how i can set wan 1 for netwock client 1, wan 2 for network client 2 and wan 3 for network client 3 in new firmware 19.
i was try and try to setting route precedent from, static, sd-wan and vpn, also i change sd-wan, static and vpn but its not…
Sophos XG 19 GA intel xeon D, 4x10gbe 16GB, 1TB SSD,
DPI ssl / tls
APPLE TV
I am having a lot of issue with streaming services since updating to XG19 getting constant buffering from streaming services Major Issue with HBOMAX error can't connect…