Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

  • XGS Fan Noise

    Hello All I know this subject has been brought up before but this is the first time I have purchased one of the lower end models that being a Sophos XGS107w. This has been installed in a quiet office and receiving complaints of the constant humming…
  • XG Firewall Missing Port 1

    I have 2 firewalls that were at the same client. There was a thunderstorm that rolled through and it seems that they were hit. So I am verifying that the firewall was damaged. Both units are XG 115W. They have 4 physical ports. Port 1 no longer works…
  • Fan Sophos XG 125 Rev 3 - is it noticeable?

    Hi there, I am thinking of getting an XG 125 rev 3 - and run it with Sophos XG Home - I was sur ehtis is a passive device, until I saw sniper0891 's post, and to my great surpise there is a fan. Does it run cosntantly? Or only if a treshhold is exceeded…
  • XGS and ISO 14001

    Hello Team, Is it possible to confirm, that XGS devices are manufactured according to ISO 14001 standard? I know, today is free day, but we need it for tomorrow morning to public tender. Thanks,
  • XG hardware revisions

    Hi, We will need modules for our XG. My provider tells me that the XG210 will go from rev3 to rev4 soon and that the modules produced will not be compatible. Apparently, once again according to my IT provider, no modules currently ordered are delivered…
  • Qotom q355g4 or Sophos sg115

    Hi, I have the opportunity to get an old SG115 for half the price of a qotom box. Still both are in my price range. How do they compare perf wise to run Sophos XG Home with all features enabled ? I run a small homelab at home, with two wifi AP …
  • XG Home unresponsive few minutes after booting

    Version: Sophos Firmware Version SFOS 18.5.3 MR-3-Build408 Device: Qotom Mini PC Q190G4U-S02 Intel Celeron J1900 Processor, Quad core 2.0 GHz, 8GB RAM 128GB SSD WiFi, Fanless Mini PC 4 LAN Issue: After installing system doesnt reboot after pressing…
  • Version 19 very slow with hardware box?

    Why XG with v.19 , internet speed drops half down in XG86 and also management becomes very slow? CPU speed almost 100%. But in software version, in virtualmachine, v.19 dont become slower and is normal..
  • sophos XG WAN Speed Conection

    Hello community, have internet connection problem, The speed of debit of my Internet connection is 100MB/s but the navigation on the internet is very slow
  • doubt about installing sophos firewall on routerboard

    hello, I would like to know if it is possible to install Sophos Firewall OS on a routerboard? Thank you very much in advance
  • Sophos Free Home Firewall

    I have an old Optiplex that I'm going to use to install the Sophos home firewall and just looking for some tips. Any basic things I should know before getting started? Thanks in advance!
  • EOL products

    I have 1 x85 firewall and another xg105 that were purchased in 2019 and now that I went to renew I discovered that sophos announced the EOL of the equipment in 2019 and I can no longer renew the licenses, honestly I am outraged at sophos Why wasn't…
  • Sophos XGS with Sophos UTM Software?

    Hi all, Has anyone tried running a Sophos XGS with the Sophos UTM software? It appears that the XGS comes with an AMD CPU rather than the traditional Intel they we all love. Thank you in advance ;)
  • No interface found on Nexcom DNA120

    Hello everyone. I just bought a Nexcom DNA120 (I understand that it is hardware similar to the UTM SG115) and I am trying to install version 18.5.3. At the end of the installation, it enters failsafe mode, and tells me that it does not detect network…
  • XGS Stopped Working (18.5.3)

    (2) Sophos XGS4500 (SFOS 18.5.3 MR-3-Build408) HA I was wondering if anyone has seen this issue. Yesterday our XGS just stopped passing traffic (nothing would go through). The XGS was accessible internal (web interface and ssh) and was able to communicate…
  • Sophos XG230 Rev 2 Home install with v19

    Good evening Looking at a Sophos XG230 Rev 2 refurbished unit for about £400, I assume there will be no issues with wiping the unit and installing v19? The unit in question has a manufacture date of May 2018
  • Intel Atom CPU - C3358 XG v19

    Good evening, Looking at a hardware refresh, but looking to achieve something low powered. I'm currently using a PondDesk based unit with a E3845 on Untangle (watching Arista's aquasition), but looking to return to Sophos XG that I previously had running…
  • XGS87W Fan noise - Console Commands and fan change possible?

    Hi, i have installed a XGS87W by my mother. It was my first Desktop Series. Normaly i install only DE and EE. I did not expect that the smallest desktop edition using a fan. The XGS is installed in the living room by my mother, because there is the…
  • Sophos XG Home on UTM 320 Hardware Issue

    I'm trying to re-use an old UTM 320 appliance with Sophos XG Home but I'm having no luck. It does not even start the process of trying to install, I am using the SW_xxxx version of the download, tried using Etcher/Win32DskImage to create the USB as well…
  • v18.5 MR-2 Locks up

    I had switch back to v18.5 MR-1. Strange phenomenon with memory usage and eventually locks up after roughly two weeks. Then have to power cycle.
  • Showing Serial Number to default string Sophos XG210

    I got issue in the serial number after reimaging the Sophos XG210. Initial Issue : No SSD was detected then we change the SSD and try to reimage with the HW version of 18.5.2 After the reimage was done, there is no serial number in the device, it shows…
  • Hardware Prerequisites for Sophos XG Firewall

    This is a simple question, but I couldn't find an answer. To run Sophos XG Firewall, the hardware requires 2 NICs. My hardware has 1 NIC, so can I simply insert an external network adapter (USB) as a second NIC? Logically speaking this should work, but…
  • Black Screen with SW-18.5.2_MR-2-380.iso after Selecting "INSTALL" and Pressing Enter at Boot UP of USB Flash Drive

    Black Screen with SW-18.5.2_MR-2-380.iso after Selecting "INSTALL" and Pressing Enter at Boot UP of USB Flash Drive I am using Brand New Firewall Hardware that Uses UEFI as the Boot Option www.aliexpress.com/.../1005003763063601.html I used…
  • auto disconnect internet

    hi ' please say auto disconnect internet every time then i some reboot firewall then connect internet .. please give solution
  • FULL DOWNLOAD SPEED BUT SLOW DOWNLOAD SPEED

    Actual speed of my UTM but once i am connected to my network all of the PC have this speed This is my FW RULE ALL IPS was turned off i tried different method but still cant have a bigger download speed