Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

  • XG Home on XG 115w Rev3 Appliance - Can't access WebGUI

    Hi, I've got a used XG 115w rev3 and installed the Sophos XG Home Software Version on it. The issue I encountered was that after a successful installation of the SW image, I cannot reach the appliance to complete the initial wizard. When patched…

  • Management access via IPSec VPN

    I'm using the Home Firewall 20.0. I configured IPSec VPN to access devices in the home. I can access most devices, but not the Sophos firewall itself. Although the VPN shows up as a zone, it does not show up as an interface (a "tunnel" interface, with…

  • Firewall no longer shows registered to my email.

    Good Day All. I built my Sophos Firewall, downloaded and registered SFOS. I use this firewall in my home network and I made a recent change to Static IPs. Once I set a static on the WAN interface, 2 things happened. I could not longer access the Web Admin…

  • Help! Firewall is "reachable" from Internet, but not able to connect to VPN or internal servers

    I am currently off site with no physical access to my firewall. Firewall is reachable from outside, e.g. WAF port 443 gives answer to telnet, and in browser any configured site is reported as "503 Service unavailable". Also SSL.-VPN port is listening…

  • Site can't be reached

    Hi everyone. I have downloaded the sophos firewall home edition. I have setup with VMware workstation and done the configuration on https:10.1.1.200:4444. The configuration went well and I finished the installation then the firewall rebooted. Now…

  • What am I doing wrong?

    Hi all, I have just installed the firewall for home use version 19 and I can't get it to connect to the internet and I can't even access the firewall web interface. I have a n68-vs3 fx motherboard and a realtek pci card. The pc is connected to the motherboard…

  • Installes Software-Appliance-Image in old XG105 no ping to 172.16.16.16 and no DHCP

    Good morning, I installed the Software-Appliance Image on an old XG105, to use it at home with the Home Use Licence. Now the appliace is starting and I can login with display and keybord. LAN1 is on, but I can not ping 172.16.16.16. And I did not…

  • Sophos XG Home on XG125 Appliance - Cannot connect.

    Hi All, We are Non profit who do charity work. We cannot afford to by new equipment's so got XG 125 donated but without license, We swapped the HDD and managed to get the XG home Edition installed. The SW image we used were SW-19.0.1_MR-1-365. The issue…

  • Unable to access Web Admin - Port 4444

    Hello Folks, Firstly this is a Sophos XG Home License so as to my understanding no support from Sophos so I need all your help. I have a Lab Setup at my house which connectec to 2 friends Lab's via VPN. This has been online and working for about 2 years…

  • Google's (former) motto: DON'T BE EVIL !

    Just happened to read something interesting on Reddit about Sophos's effort to differentiate the (free) Home version versus the Business version of Sophos XG starting from v19: Did Sophos discuss or write anything about this in any posts or changelogs…

  • Free XG home Firewall in esxi and can't get to the gui

    I have two installs of 18.5.1 and I have the same issue with both. I can't get to the gui. I've changed the nic1 ip to anything in any of my other vlans and I just get can't be reached. Obviously 172.16.16.16 not being in my network won't work so changing…

  • XG FW not reachable after install/initial

    Hi guys, Seems i'm lost in config somewhere, i had to reinstall XG Home VM, tried both 18.0.1 and 18.0.5 versions. After finishing setup, firewall is unreachable on wan and lan ports, cant ping anything until i login true console from host and use…
Unfiltered HTML