I have got the install completed and all is fine, running a VM under VMware workstation.
I have port 1 setup as LAN on my virtual network. And port 2 setup as WAN (bridged mode), gets dhcp from my internet router.
Everything works fine on the VM side…
Good day,
Please assist, I have set up a RED 50 in Standard/Unified to an XG 230
Created a Zone for RED and applied the RED device to the Zone
Created Firewall Rules for RED to LAN, LAN to RED and RED to WAN
On a device connected behind the…
Have 2 sites connected with an IPSEC tunnel
192.168.1.0 - head office (SSL VPN 10.81.234.0)
10.1.10.0 - branch office (SSL VPN 10.81.235.0)
when a user connects via ssl vpn they can't communication to the other site. What do i have to add in order…
We need to NAT two external (to us) IPs to two different servers from the same interface. We got one to work without issue, but the second one is not working.
For the first (10.36.109.84) we created a business rule to forward anything on PortA5 to 172…
Hi all,
I have 2 WAN links, both are from different ISP.
One of them (GW-principal) it's working flawlessly, the sencond one (GW-secundario) was the backup link for the GW-principal.
We decide to change the link state from Backup to Active so we…
Hello,
my problem is, that there is a webserver behind a IPsec tunnel. The access works fine from local networks defined for access. But I want to access it through client VPN (SSL) (e.g. to upload files via ftp).
First problem is, that I can not…
Hello
I just (partially) installed an XG105. Most things work correctly but I'm having trouble getting a policy routing rule to work.
This is the situation/problem
VLAN10 (10.10.0.0 / 255.255.0.0) VLAN40 (10.40.0.0 / 255.255.225.224) range determined…
Hallo,
Ich habe dank Eurer Hilfe Zwei Sophos UTMs erfolgreich über einen RED Tunnel verbunden.
Ich kann aus beiden Richtungen jeweils Rechner an pingen. Jedoch nur an pingen nicht mehr.
Gerade versuche ich auf einen Webserver (im 192.168.178.0/24…
Hallo,
ich versuche gerade zwei Sophos UTM über die Site to Site RED funktion zu verbinden.
Bei mir Zuhause habe ich eine Sophos (Sophos1) und jetzt neu eine weiter an einem anderen Standort (Sophos2).
Die RED Verbindung zwischen den beiden UTMs…
Hi Guys,
maybe i am blind, but i've not found a solution for my NAT / Routing issue.
I need to route / nat outgoing WAN traffic from one of my Client Servers to use the WAN IP from my UTM9, but have not found a viable solution yet.
I have currently…
We have a new IPSec tunnel established between our XG and a remote Cisco site. It looks like this:
XG Remote Site
172.20.0.0/16 10.1.1.150/32
The tunnel is up, both inbound and outbound rules were set up:
VPN-LAN (172.20.0.0/16) Any / Any…
I'm trying to get internet traffic to arrive to my Plex media server which is attached to my XGF. I've Had it working without issue when connected to my outer firewall; but I'm struggling with getting it working via XGF.
My network is as below:
…
Hi Guys,
I think XG has issues routing RIP with VLSM.....
My current XG RIP config is the following:
My current router config is the following:
As you can see, the router is advertising 10.7.42.0/24 network.
For some reason the Sophos…
Hi All,
I've had a bit of mare configuring and installing this recently - hence the plethora of questions over the past couple of days. Anyway, I've got to a new stage at the moment.
My network is configured as such:
DMZ 10.0.0.16/28
^
(To…
Hello,
I lodged a case with Sophos over the phone [7462215] a few days and called through each day with the response of "the engineer assigned to the case is unavailable, and there is no one else who can take the job, we will call you back" followed…
Wondering if anyone has seen this before.
We have 3 offices, Main has a 210 and the Branches both have a 115 connected to MO with a S2S SSL VPN. In the MO the local lan is great, quick, no issues. But at the BO, their connection to the MO is very slow…
Hi Guys, We use a 3CX Phone system with a SIP Trunk.
We are experiencing issues where calls make it through to the system maybe 3/5 times successfully then other times the call wont even make it to the 3CX server (No entries in call log) or the call…
Hi, I've got a site to site VPN working and I can ping from either side but I don't see any option to route internet traffic as well as network traffic. I also couldn't find any documentation on the subject. If someone could please enlighten me on how…
Hi community,
Maybe isn't the first time you hear about this topic, but I need to know if VRRP configuration is possible on the current XG firewall SF-OS version or if it will be available any time soon.
Otherwise, if this isn't possible, Is there…
Hello,
I have problems with VLAN and Sophos XG.
Internet and everything is working on Port 1 under LAN Zone.
I created a VLAN interface on Port 1 with VLAN ID 3516. but it shows N/A under status.
I'm running a domain controller and some other…
Hello,
I've been using the XG Firewall for a few days now and it's great so far.
There has been one issue I couldn't solve on my own, I hope you guys can help me with this:
I've got my network configuration like this:
Now all I want is to…
We have a newly office and it's now operating, but we have some problem regarding network access, here our network:
SiteA and Site B is connected through VPN IPSEC, everything is ok within this two networks, ping and trace router are all ok.
SiteB…
This is my first time setting up an OSPF routed network. This network consists of 2 head offices (for redundancy) and 3 branch offices. I have both HO's in area 0 and all BO's in area 1. I set up one side of the network in OSPF neighboring R1 to R2, R3…
I'm on an XG running SFOS 16.05.3 MR-3.
I have a private LAN and a Guest Wifi zone. My printer is on the LAN and I want the guest wifi users to be able to print to the printer. I have a rule set to allow the traffic but the print jobs do not come through…