Hallo, folgende Herausforderung: Aufbau: - Red20 Ist mit Standort B verbunden (Standard/Getrennt) - Standort B (XG) ist mit Startort A (XG) verbunden (RED Tunnel) Läuft zuverlässig. Nun möchte ich von der RED20 über Standort B auf Standort…

Trying to figure this out with the tech docs. I finally got it connected and my tracert goes out the office WAN, great. I can't ping the LAN IP of the RED from the firewall diags nor can I ping anything in the main office. I set up a RED zone and firewall…

Hi, Looking at deploying a new site with a Sophos SD-RED60 and as there will be a few switches at this site would like to put some redundant switching options in using STP. I can't see any options in a RED interface for STP. Is it possible to configure…

I have a RED15W which was working fine, with WiFi. AP was active. Because the IP range assigned to this RED became to small, I changed the IP and Subnetmask. Changed the DHCP Server object on the XG accordningly. The built-in AP of that RED…

Hi, So i have the following Problem: On Site A i have a XG v18 with 2 WAN Interfaces, a client network (192.168.166.0/24) and a VoiP Network (192.168.168.0/24). WAN-1 is the default WAN and with SD-WAN routing all traffic coming from the VoiP Network…

Hi, does anyone has tried ​to install XG SFOS on a sophos red through serial? Just want a red to became my home firewall... someone have some tips? Thanks a lot guys

Hello i have xg 330 and in branch red 60 Standard/split 100.50.20.x Tplink global IP:85.85.85.x local IP:192.168.1.1 i want to forward 3389 port to server 192.168.1.x how to port forward Thanks

We have a SD-RED60 where we first noticed this behaviour when we applied the firmware 3.0.005 which is currently installed. When we installed the firmware, it rebooted and came back about 65 minutes later. In the meantime I noticed several DHCP requests…

Hi, I'm having a problem logging on your support portal. So maybe I can request here an unlock code for our RED 10 device? RED ID# A3200C66EC9E62B Model : RED 10 Rev 3

XG210 (SFOS 18.0.4 MR-4) 2 RED 60 Devices at remote sites MAIN OFFICE: 192.168.0.0/16 RED2: 172.16.0.1/255.255.255.192 - Standard/Unified - Zone: LAN RED1: 172.16.0.65/255.255.255.192 - Standard/Unified - Zone: LAN RED Devices show up connected…

Hello, Is it possible to configure the RED so that the remote clients get an IP from our internal DHCP, i.e. behave in the same way as if they were on our internal LAN? Best regards!

3 remote sites with RED 60 devices connected to main office Sophos XG Unable to access devices at remote office from main office RED Operation Mode Standard/Unified RED Interfaces in Zone: LAN Already added Firewall Rule - Source/Destination LAN…

Cannot ping main site server; Unable to access site 1 resources. I noticed that the system host ip for reds1 is not the same as the remote site external IP. After I upgraded and re deployed the red, I now see the remote subnet I assigned as the #reds1…

Hi, I need to help in troubleshooting the issue that im facing since last 3 days. I have 30MB dedicated bandwidth in our Head Office. We have 25 Branches connected via RED50 Devices with 4MB up/down dedicated bandwidth. This past few days our connection…

Hello everybody. I would like to clear a technical question about RED devices. I understand that all his administration is via Central. I would like to understand if there is administrative access to the equipment to perform any troubleshotting (diagnostic…

Hi, is it possible to change the zone of a RED (here RED60) without deleting and recreating the RED? The RED is member of a bridge and it seems, this is causing the zone drop down to be inactive. Other REDs, also 60's have this option changeable.

hi there, i want to move my XG Firewall from 1 location to another location keeping the existing configurations except the Firewall IP how best can i do this without affecting the all the Reds which are routing through the current location. Reg…

As suggested by Sophos, we bought some XG 86 to use them as RED-Devices for connecting branch offices. In some branch offices, we added licenses, yet, and operate them in transparent mode - hence, all internal network traffic is tunneled. But in some…

Hallo, ich habe ein Problem. Ich habe bei einem Kunden eine Sophos XG125 stehen. In einer Aussenstelle steht eine RED SD20. Ich habe sie im dStandard/Split konfiguriert. Heißt ja der "normale" Internetverkehr geht direkt raus und der Rest über die…

Hello Community, I've setup two RED Tunnels between to XG Firewalls. And I setup static route to the opposite firewall. The routing works as expected. Now I set another route with a higher metric on the 2nd RED Tunnel. If I interrupt the first tunnel…

Hi, Good day... We have 3 Gateway in our Sophos XG Firewall, as shown in the attach picture. Now we are planning to cancel the current link which is Port2. Now we are planning to slowly move the existing RED 50 connection to other Gateway interface…

Hello, I've just deployed my first Red20. I've set the Red20 to do DHCP for devices connected to it's LAN ports. I was hoping to set a reserved IP for one of the devices connected to the Red20 LAN1 port. However, I can't seem to see any options in…

Head Office has XG125 18.0.5. HO contains Active Directory Server. Branch Office has XG106 18.0.5 HO has STAS configured and working. Live users are reported in XG, all is working. BO can reach reach HO via server/client RED tunnel. BO user…

Hello Community, Today we migrated a UTM to a new XGS3100. We have a RED15 that was connected to the UTM and worked well. After connection to XGS we see only this in the RED Log and the RED is displayed as offline: Thu Jun 10 04:52:10 2021 REDD…

Hi community, I have installed a RED 15 in a branch office, gave him power and a wan cable with total access to the internet. in the other side i configured our central sophos xg 310 appliance with 18.04 Version of SFOS a RED interface to connect…