i have a problem with red configuration after new firmware SFVH (SFOS 20.0.2 MR-2-Build378) when i create a new red interface the red server Uplink IP: n/a or the red client Uplink IP: n/a the connection between red server and red client not stab…

Ola boa noite, tenho 2 firewall configurado em Tunel RED,Dentro da rede consigo enchergar a rede do outro Firewall , mais quando estou em rede externa, e uso a VPN Sophos connect client, so consigo ping em uma rede, nao consigo da outra, quero acessar…

I have a customer that uses SOPHOS FIREWALL and have connected a bunch of RED 15 and RED 20 devices. And for my customers end users they usualy connect to their RED device using SOPHOS CONNECTS . But mor and more often , they ask if it is possible for…

We have a community post 5 years ago regarding Captive portal on branch site with RED on standard/split setup. The answer was that is not possible because, in Standard/Split implementation, the internet traffic is routed directly from the RED to the…

Hello, we have two firewalls of the XGS segment connected over a Red tunnel. On one end we have a hardware terminal that is used to take the working times of our employee. Now we have the situation that every few days the terminals losts connections…

We have a banking customer with Sophos deployment and the network looks like below: Firewalls: XGS 87 (12nos), XGS 107 (2nos), XGS on AWS (1nos) Network: XGS 107 is deployed at DC and HO AWS hosts their software and has a Sophos deployed there…

Sophos Firewall version 19.5.1 Main office has XGS 3300 Branch offices have XGS 136 devices Branch offices have primary cable internet on port 2, and 4G/LTE cellular backup internet with a Netgear cellular modem connected on port 3. Cable on…

Hello everyone, I am quite new to Sophos and just recently bought two Sophos XGS, a XGS 107 for the main site and a XGS 87 for a remote site about 5500km away. I am currently configuring and testing everything before flying there in two weeks for the…

I have a customer using Sophos Firewalls in their environment. They have XGS87 at the branches with Broadband and P2P links. The IPSEC VPN disconnects too many times hence we decided to establish a RED connection and it worked really well on one site…

Main firewall: XGS2100 at v.19.5 new Remote firewall: XG125w at v.19.5 old remote RED15 I am trying to migrate a remote site from RED15 to a site-site RED using a XG125w while keeping the remote LAN IP range intact. I set up the new remote RED tunnel…

Hello, I have a problem with connection a PC in one branch office to a NAS in other branch office. We a four branch offices and all of them are connected to head office through a RED tunnel. It is a star topology. If i try to connect from head office…

Hi, I have a question about something I think it should be possible somehow.... We have a head office and two branch office, each of them with a Sophos XG firewall. All of them have two WAN interfaces (1. Fiber and 2. DSL). I would like to use *only…

Hello, Can I do anything to improve RED tunnel throughput between local XGS 2100 on 1000/500 WAN link and virtual XG firewall running in Azure? Enable/disable compression does not change anything as far I can see. PS C:\Users\administrator\Downloads…

I'm having an issue getting the Site-To-Site Red working. I have it all setup and it shows connected but I can't access the remote network. I can ping the remote gateway but nothing past that. Below are my settings for the Red Server.... RED IP: 192…

Reference: Sophos Firewall: OSPF over RED KB-000038170 Jun 17, 2020 Our general setup: We have one HO (XGS v18.5.3) and two BO's (XGS v18.5.2). All three XGS have two WAN interfaces connected with 2 different ISP's. I'll name them "T" and "P". ISP T…

Hi, I configured a RED tunnel between two XGs according to instructions from Sophos. 1.RED tunnel configured 2.LAN2LAN rule created. 3.Routing between LANs set up via RED tunnel. RED TUNEL is active and work fine But I have the problem that…

Dears Good Day. I success to establish a new red connection between Sophos x135 ( Server ) and Sophos Xg ( Client ). and routing between two networks is working very well. but I have a problem if the red connection status is down. I have to…

Hello Community, we have redundant RED Tunnels between the Firewalls and I want to bind the Tunnel to a specific Interface like I can do with IPsec. So I want this setup: I cannot configure an outgoing Interface on FW1, only an incoming interface…

We have 3 primary sites, they have XG125 and Custom hardware 4-core 6GB RAM boxes, all running 18.5.1. There are 7 branch sites, each has 3 RED tunnels, to the main 3 sites above. Ever since we upgraded to 18.5.1, it seems like when a Branch or…

Hi, I'm trying to set up a reliable connection between two offices of the same company using RED tunnels instead of VPNs. There are limitations which are not relevant now, but the fact is that we can't use IPSEC VPNs and RED tunnels work fine. This…