Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

  • Problem in Sophos XGS 136W after power shortcut

    Hello all, I am new in this Sophos community. So, first of all, hello everybody and thank you for your future help in resolving my issue. I have tried to find similar issues but I could not find them. After working during 9 months with a Sophos…
  • XGS 18.5 MR3 trying to send WAN Data over dedicated HA-Link mv-pcimux0 - Invalid Traffic

    I have noticed this on a XGS136 18.5 MR3, the machine is in HA and when viewing firewall log it is full of invalid traffic logs. When doing tcpdump I can see in GUI that it resolves the out interface as Port10 which is my dedicated HA interface. The…
  • Lan port off

    Hey everyone, i have cyberoam cr25ing device. I installed sw 17.5 version on the device. installation was successful I can make configurations on the interface. But my lan port is not active, the led light is off. Can you help me? thank you
  • Two Questions about VIP and SSL VPN

    Dears, I have two questions: The first is I need to make a virtual IP for server (give it two IP and appears with one IP ) How to do this with sophos XG? The Second I have an issue with ssl vpn, by applying ssl vpn it's working good with windows…
  • Configuring new LAN and WAN ports

    I have upgraded my Internet to 2Gbps, but currently have a 1Gbps bottle neck at the firewall. I have an XG450. I have 2 SFP ports that I would like to move my LAN/WAN connections to. But I am not sure what all I need to change in order to accomplish this…
  • Duplicate WAN port with the same Public IP

    Is it possible to have assign another port as the same as my WAN port? Same public IP Address. I'm having challenges to connect Cisco IPSec Site to site (Remote site with CGNAT) to my Sophos with Public, Dynamic IP Address. The idea is if it is possible…
  • Saturated Bandwidth Sophos XG

    Hi guys, 1 of my customers has a brand new XGS2100 with v19.... when i try to take a speedtest from a pc... all the other pcs goes offline... even my teamviewer goes off... and when the pc finish the speedtest all bacame back online... Even if i…
  • XG Can't ping ISP gateway but users can

    We have an XG 310 that has two separate internet connections to the same ISP for redundancy and load balancing. Obviously, these two connections are set up on their own WAN ports on the XG, each with a different static IP (and each port has a different…
  • PPoE Wan connection drops over and over

    We are using xg115w v19 Wan connection drops and connect again around every 20-30 minutes and Why I can not save override mss section? thanks
  • Fresh Sophos XG SW installation , Enable Port 3 to access web admin interface

    hello we have server with fixed NIC (2 Fiber Channel ports) and another NIC with 2 copper ethernet ports. we installed fresh Sophos XG SW on this server , Sophos XG detected FC ports as port 1 and 2, and as we know default configuration is (port 1 is…
  • no button to close the interface!

    xg V19 has been released and until now no wayto turn off an interface button permanently? does it look t hat hard to make it?
  • No interface found on Nexcom DNA120

    Hello everyone. I just bought a Nexcom DNA120 (I understand that it is hardware similar to the UTM SG115) and I am trying to install version 18.5.3. At the end of the installation, it enters failsafe mode, and tells me that it does not detect network…
  • installing SW-18.5.2 on XG 125

    Hi All I recently picked up an XG125 as I wanted to install XG home on it, which I have done, but port one (lan) and port two (wan) have no activity and I am unable to connect to the device via https://<IPADDRESS>:4444 Has any had any success with…
  • internet access

    Thank you for what seems an excellent product. I am a newcomer to firewalls (I briefly used the KYZO "Pizzabox" some 10 years ago, but nothing since), and am trying to understand how best to set it up. So far I have it working with the WAN port connected…
  • Interface speed autonegotation getting downsized

    Hi * I have a software based Sophos Firewal with 4 Interfaces. This month I changed from DSL to Fibre which allows me to speed up my browsing ;-) Changing WAN connection was not a big deal, but my interface - lying on Port2 - has some trouble by properly…
  • Need help configuring the WAN interface

    I am very new to the sophas and I only have some months of experience in setting simple Network . I have experience in configuring the sophas network with two ISP(currently Worldlink and Subisu ) where I set one ISP in port 1 and another ISP in port…
  • New Sophos XG Home stuck at 10meg/half Duplex for WAN/LAN

    Hello, I've just installed Sophos XG home on VMware Vsphere and it's just come up and running, but I can see that the LAN and WAN are autonegotated to 10 meg half duplex. Here is what the LAN side looks like from the Linux Mint laptop I have directly…
  • Control Center Dashboard

    Have a weird issue Port2 (WAN) is up and connected via PPPOE but status shows red as in down. I have rebooted twice already and still shows RED. There is internet. Any ideas?
  • Problem with PPPoE connection

    Hello everyone, I have been trying to set up a PPPoE connection for several days. Unfortunately, the connection is not established despite all the correct settings. I enter login and password, set VDSL for my internet operator, set MTU according to…
  • Urgent port Failure need Command to change manage Lan port

    Manage port has failed and i cannot access to remote into XG can someone list the command needed to switch from port 1 to port 3 in at the console thank you
  • XG 2. WAN failure kills outgoing network

    Hello, I have 2 WAN port as long both are working everthing is ok. But as soon my 2. Fritzbox is dead (Cable Fritzbox fails like once a year, but thats another story) there is no regular outgoing network anymore. In WAN Manager both are ok, in the…
  • XG - Interface could not be deleted

    Hello, I converted a XG firewall from appliance to virtual and I want to remove old lag interfaces. I was able to delete lag0 but I am not able to delete lag1. Lag1 interface got no sub-interfaces, only two attached ports: Error message is…
  • auto disconnect internet

    hi ' please say auto disconnect internet every time then i some reboot firewall then connect internet .. please give solution
  • XG Firewall home edition on XG 106, hardware port assignment corrections

    Hello, I successfully installed XG Firewall Home Edition onto XG 106 rev.1 hardware, not without great difficulty. Everything is working, but the "hardware" port assignments do not match up with physical port numbers. It was easy enough to get them…
  • Interface naming issue

    We purchased two XG750 to run in HA-Active-Passive config. Each is identically equipped with 4 SPF+ ports and 2 QSFP ports. On the Primary XG the SFP+ ports are named PortC1-PortC4, left to right, but on the Auxillary XG the SFP+ ports are name eth0-eth3…