Hi,
Once we have updated the new released firmware SFOS 18.5.1 MR-1-Build326 observed there is an internet fluctuations between the Primary and Auxiliary firewall, also there is an HA(High Availability ) was Failed to discover the secondary device…
Hello Community,
I have a failover and want to generate a CTR on an auxiliary device, what should I do?
The appliance is the XG 550. The HA configuration is Active-Passive. Currently, the Primary device has failed and is failing over.
Thanks,
Hello Community,
three days ago we installed the update to 18.5.1 on our XG330. This is in the HA (Active-Passive). The days after that it ran without any problems. As of today, the admin web interface is extremely slow and not all informations show…
Hello
I'm trying to set up a sophos xg firewall HA in active-passive mode in a lab to implement in real life later. I want to connect this with 2 dell OS10 in VLT for a redundant setup (like in the picture). VLT to the cisco switch works as it should…
I've inherited a HA-setup with two XG's (Active / Passive).
I now want to upgrade them to the latest firmware.
From what I've been able to gather I should simply logon to the web-gui on the Primary one and do a standard upgrade as if it was a standalone…
Hi,
I'm looking for users advice and experience for upgrading to 18, especially directly from 17.5 to latest 18 .
I'm thinking about upgrading in the next days, but we have a critical organization and I'm reading of several criticism especially…
Hello,
I have a question regarding the behaviour of the SFOS HA function. What will happen, if the license expires? I know that for example a UTM Cluster would shutdown the secondary node.
Thanks.
When attempting to upgrade to MR4 from MR3 in the past the upgrade crashed out and would not complete. I worked with support and we rolled back. I was advised not to upgrade from MR3 to MR4 as there were issues with HA upgrades. Is it currently safe to…
I had the same problem. I have 2 XG750's in HA and it broke HD cluster when doing the update. That caused our company a 3 minute disruption in internet access. I thought HA stands for High Availability? I was running V17.5 MR15 on both XG750's.
The…
Hi Guys, My company bought a Sophos XG135 a few months back. At that time we had around 85 users and Fortigate technical person suggested that it will handle up to 100 users in our environment. Now, we have around 70 more people who joined our company…
Hi,
i have 2xXG330. I want to use high availability mode. (Primary Activ/Passiv) with QuickHA.
On the secondary i use same passwort and secudandy mode. Starts on both QuickHA detection, but not working.
1. Both uses PORT8 (one lan cable from…
HI, i have two queries: Query#1:i have 2xXG450 configured in Active-passive HA, it is configured with AD for user authentication. when i was upgrading fromV17 to v18MR4 then i faced issue that authentication stop working. HA status was also disturbed…
Hi,
We are amidst a network change from HP Curve Switches to Meraki, the network it self is an inherited mess, and am in the process of tracing the cables from our primary and HA Sophos devices, in order to patch into the new Meraki switch.
I would…
Good Morning! I have two XG135 Firewall equipment. They were HA configured and firmware SFOS15.5. To carry out the firmware update process, I removed the HA as requested in the update screen, but after performing equipment 2 it was no longer recognizable…
Anybody know how to setup Sophos XG firewall HA(Active/Passive) in AWS? Single VPC and multi-AZ. Is it possible if I use ELB and Single Node Auto Scaling?
I'm in the process of trying to add a second XG VM in my production environment to allow for HA. As part of that I spun up two test machines to ensure I was comfortable with how everything failed over, the behavior of IPSEC tunnels, etc.
So in my environment…
Hi there,
We are due to upgrade our current XG210's (in HA) to v18 MR-5 and to be honest, I'm really not looking forward to it.
I never seem to fear upgrading our Sonicwall firmware, which is always flawless, but Sophos makes me have sleepless nights…
I am setting up a new Active-/Passive XG cluster. I did some testings and the results seem a bit strange to me.
HA was completely up and running.
I deactivated HA from the auxiliary/passive device (should that be possible at all?), then this device…
Guten Morgen in die Runde
ich habe eine Sg230 im XG Modus und möchte diese gegen Ausfall absichern. Kann ich parallel eine virtuelle XG aufsetzen und dann eine HA Kopplung erreichen?
Meine bisherigen Versuche mit SG230 und XG230 scheinen wegen unterschiedlicher…
Hello All,
I am new to Sophos and I am attempting to configure an XG310 to work in Active-Passive as our backup to our primary FW. I went through the initial setup and assigned a static IP to the FW but I can only access the web GUI from the same subnet…
Hello,
I installed two boxes with 18.0.5_MR5-586 and Initiated after License Sync (only the primary one) Quick HA on both nodes.
After some while, the HA Mode is enabled.
But after that I lost access to the primary Node. This Node is no…
In mid-February/21, we performed an RMA of a box due to disk failure.
In April/21 we had failures in the H.A, where sophos recommended replacing the patchcords (Adm and Peer), but the problem persisted and we were asked again for the RMA this time of…
We have been having issues getting the HA up and running since migrating to XG. Even with upgrades from MR1 through to MR4 the HA just keeps failing and both notes just keep swapping between primary and auxiliary(worked perfectly on UTM)
We have been…
Hallo zusammen,
ich habe gestern in meinem Testlab mein erstes Sophos XG Cluster gebaut. Lief auch nach ein paar Anlaufschwierigkeiten ganz gut. Allerdings stellt sich mir die Frage, ob bei der XG Serie bei 2 Gerten bereits Schluss ist, oder ob sich…