Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

  • XG Home unresponsive few minutes after booting

    Version: Sophos Firmware Version SFOS 18.5.3 MR-3-Build408 Device: Qotom Mini PC Q190G4U-S02 Intel Celeron J1900 Processor, Quad core 2.0 GHz, 8GB RAM 128GB SSD WiFi, Fanless Mini PC 4 LAN Issue: After installing system doesnt reboot after pressing…
  • VLAN-s and Hyper-v XG?

    Hi! Do VLAN-s work in Hyper-V version of XG?
  • Version 19 very slow with hardware box?

    Why XG with v.19 , internet speed drops half down in XG86 and also management becomes very slow? CPU speed almost 100%. But in software version, in virtualmachine, v.19 dont become slower and is normal..
  • sophos XG WAN Speed Conection

    Hello community, have internet connection problem, The speed of debit of my Internet connection is 100MB/s but the navigation on the internet is very slow
  • Connect ESXi host directly to Sophos XG with VLANs

    Hello, I have a Sophos XG appliance and an ESXi 7.0 host directly connected to the appliance (i.e. no physical switches in between). I want to isolate the VMs on the ESXi host so that they should not be able to communicate internally unless explicitly…
  • doubt about installing sophos firewall on routerboard

    hello, I would like to know if it is possible to install Sophos Firewall OS on a routerboard? Thank you very much in advance
  • VM ESXI v7 advises XG CA is not in PEM format

    I have tried installing the CA from v18.5 and V19 GA and the VM ESXi advises that they are not in PEM format and therefore fails to install the CA. Please advise what is required to change the XG CA to be a compatible PEM for mat that suites the VM…
  • Sophos firewall software port position

    Hi Sophos. I have configured the xgs firewall software version in vmware esxi. I have created 7 network adapters linked to port 1 to 7 of the firewall. At every port I have configured ip, dhcp and policy with it. The problem is. when i delete network…
  • Proper package for XG in ESXi environment

    Hello I found some websites that suggest to use "Software Installers: Firewall OS Software ISO" for ESXi envinroment, instead of "Virtual Installers: Firewall OS for VMware". Which is the proper package for ESXi v7? My original idea was to use "sf_virtual_vm8…
  • Sophos Free Home Firewall

    I have an old Optiplex that I'm going to use to install the Sophos home firewall and just looking for some tips. Any basic things I should know before getting started? Thanks in advance!
  • V19 fails 1 time per day on Hyper-V

    SOPHOS is running on Hyper-V 2022. SFVUNL (SFOS 19.0.0 GA-Build317) About 1 time every day the SOPHOS VM freeze. This is the Error: - < Event xmlns =" schemas.microsoft.com/.../event " > - < System > < Provider Name =" Microsoft…
  • EOL products

    I have 1 x85 firewall and another xg105 that were purchased in 2019 and now that I went to renew I discovered that sophos announced the EOL of the equipment in 2019 and I can no longer renew the licenses, honestly I am outraged at sophos Why wasn't…
  • Sophos XGS with Sophos UTM Software?

    Hi all, Has anyone tried running a Sophos XGS with the Sophos UTM software? It appears that the XGS comes with an AMD CPU rather than the traditional Intel they we all love. Thank you in advance ;)
  • Sophos XG in Azure - Southeast Asia

    So I can't deploy Sophos XG in Southeast Asia. It keeps failing saying that it needs a Gen1 machine, but there are no Gen1 VM's available in Southeast Asia - what now?
  • Fresh Sophos XG SW installation , Enable Port 3 to access web admin interface

    hello we have server with fixed NIC (2 Fiber Channel ports) and another NIC with 2 copper ethernet ports. we installed fresh Sophos XG SW on this server , Sophos XG detected FC ports as port 1 and 2, and as we know default configuration is (port 1 is…
  • No interface found on Nexcom DNA120

    Hello everyone. I just bought a Nexcom DNA120 (I understand that it is hardware similar to the UTM SG115) and I am trying to install version 18.5.3. At the end of the installation, it enters failsafe mode, and tells me that it does not detect network…
  • XGS Stopped Working (18.5.3)

    (2) Sophos XGS4500 (SFOS 18.5.3 MR-3-Build408) HA I was wondering if anyone has seen this issue. Yesterday our XGS just stopped passing traffic (nothing would go through). The XGS was accessible internal (web interface and ssh) and was able to communicate…
  • Sophos XG230 Rev 2 Home install with v19

    Good evening Looking at a Sophos XG230 Rev 2 refurbished unit for about £400, I assume there will be no issues with wiping the unit and installing v19? The unit in question has a manufacture date of May 2018
  • Intel Atom CPU - C3358 XG v19

    Good evening, Looking at a hardware refresh, but looking to achieve something low powered. I'm currently using a PondDesk based unit with a E3845 on Untangle (watching Arista's aquasition), but looking to return to Sophos XG that I previously had running…
  • XGS87W Fan noise - Console Commands and fan change possible?

    Hi, i have installed a XGS87W by my mother. It was my first Desktop Series. Normaly i install only DE and EE. I did not expect that the smallest desktop edition using a fan. The XGS is installed in the living room by my mother, because there is the…
  • Sophos XG Home on UTM 320 Hardware Issue

    I'm trying to re-use an old UTM 320 appliance with Sophos XG Home but I'm having no luck. It does not even start the process of trying to install, I am using the SW_xxxx version of the download, tried using Etcher/Win32DskImage to create the USB as well…
  • v18.5 MR-2 Locks up

    I had switch back to v18.5 MR-1. Strange phenomenon with memory usage and eventually locks up after roughly two weeks. Then have to power cycle.
  • Sophos XG SW Firewall install via USB

    I cannot get the the sophos XG software firewall installed. I cant even get my intel box to read it. I am using Shuttle DS-61. I have made usb bootable drive many times and cannot get it to read it.
  • Showing Serial Number to default string Sophos XG210

    I got issue in the serial number after reimaging the Sophos XG210. Initial Issue : No SSD was detected then we change the SSD and try to reimage with the HW version of 18.5.2 After the reimage was done, there is no serial number in the device, it shows…
  • Sophos Firewall in Azure

    I've deployed plenty of Sophos XG/XGS appliances but I'm considering deploying one in Azure for the first time. I have a couple of questions and was hoping someone else who has done it may know. 1. How's the real-world performance? If a deploy a 2c4…