Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

  • APX from Firewall to Central Wireless

    hello, what is the best way to migrate an APX 120 from an XGS to Central so that I can then manage it via Central Wireless? Thank you very much!

  • Switch APX530 from SG to XGS

    Hello, i have a big problem. At the Moment i have a migration from SG UTM 9 tu Sophos XGS. Everthing works fine, except Wireless. I disconnected the old Sophos UTM and Connected the Sophos XGS to the LAN. The APX AccessPoints immediatly appears…

  • AP15 get disconnected

    I am having issue on 18.5 MR1 with AP15. Wi-FI goes down and only reboot is the way to get wireless lan again. Looking at the wc_remote.log, here what happens when the wi-fi stacks: 30>Jan 21 08:58:56 A4004F40C263B03 hostapd: wlan0: STA a0:d0:dc:2c…

  • Sophos APX causes network loop

    Hello everyone, after restarting the two APX 120 that we are using, a network loop is caused. If I disconnect the AP´s from the network, everything works fine again. I have replaced all cables and used different ports. They are directly connected to…

  • Add off-brand AP to XG125W

    I have been handed a task to add a Ubiquiti Nano AP to an existing XG125w network to extend range for an office that's too far away from the XG to get good service. DHCP is provided by Domain controller on the network Goal is for the Unifi AP to be…

  • XG Mesh without internet on MESH APs

    Hello, I have a problem and I have no idea where to look, maybe someone can give me a tip. I have an XG115 to which an APX120 is connected. The AP is a member of a MESH and serves as a root AP (5 Ghz). The AP also broadcasts the client SSIDs in 2.4 Ghz…

  • Sophos XG v18 - getting list of IP addresses of all currently connected Wifi devices by a custom build application

    Dear community, I have the following setup: in a LAN a XG 115 firewall is managing two APX 530 access points. Both access points are in different zones, firewall rules allowing only certain machines in the LAN to transmit data to the connected Wifi…

  • XG 135W with APX120 wifi speed issue

    Hey guys. I would love to get your opinion and help on this. I have XG135W and four APX120. With machines connected directly via ethernet has no speed issues. However any wifi devices are experiencing 1/4 of the speed. As a test, I connected google…

  • XG wireless client traffic VLAN confusion

    I have connected my APX120 to the XG and created a new wireless network, basically same as the default sophos. Bridge to AP LAN. Now I want to add another network with its own subnet, that will have access to my LAN on Port3. So I created a vlan connected…

  • APX 320

    i am a home license user, and i am looking to replace the AP i use currently as it is a old Cisco device. Can i manage and configure an APX 320 device thru XG on MR2 code? i see a few on Ebay and Amazon with the POE for ~$400..

  • [SOLVED] Issues with APs

    Hello all, I've been experiencing some issues lately with APs configured as 'Bridge to LAN'. First time, I saw the APs as 'Inactive' on the firewall, since we were implementing POL on our network infrastructure I thought this was due to the dBs on…

  • DHCP lease renews every minute - inactiv access point

    We have the following problem with a XG85w and a Sophos AP55. The ap connects to the firewall -> Receives an IP via DHCP -> Is listed and can also be added via wireless protection -> But the AP will only appear as inactive on the firewall. - the cables…
Unfiltered HTML