I just want to state that after spending many hours trying to figure out why Fast Transitioning wasn't working on my two AP100C APs is because XG firewall ( SFOS 18.5.2 MR-2-Build380) is setting the wrong config option in the the /etc/config/wireless…

Hi, on APX530 it is possible to set The 5 GHz Channel to 100 and above. Is this not possible on the APX320? Thanks for your help Greetings Andreas

Hi, ich have created multiple Wireless Guest Networks. There were 3. I removed 2 of them. Everything was removed accept the Wireless Interfaces under ->Network->Interfaces Is it possible to remove them??

Hallo, ich habe an einer Sophos XGS 116 zwei Access Point angeschlossen. Ich habe Clients im Netzwerk die sich mit dem falschen AP verbinden und dadurch eine sehr schwache Verbindung haben. Besteht die Möglichkeit in der Sophos, den Clients fest…

hello, if I want to migrate an AP from a SG to a XGS, do I have to remove it from the SG or will it also be recognized by the XGS if it was not removed in the SG. Thank You!

Hi There, I am having a different issue in my network, Whats-App calls working on LAN via Whats-App desktop app but not on Sophos Wireless network on cellphones. I am having a XG2100 Firewall and APX320 APs.. Please suggest a solution.

hello, what is the best way to migrate an APX 120 from an XGS to Central so that I can then manage it via Central Wireless? Thank you very much!

Hello, i have a big problem. At the Moment i have a migration from SG UTM 9 tu Sophos XGS. Everthing works fine, except Wireless. I disconnected the old Sophos UTM and Connected the Sophos XGS to the LAN. The APX AccessPoints immediatly appears…

I am having issue on 18.5 MR1 with AP15. Wi-FI goes down and only reboot is the way to get wireless lan again. Looking at the wc_remote.log, here what happens when the wi-fi stacks: 30>Jan 21 08:58:56 A4004F40C263B03 hostapd: wlan0: STA a0:d0:dc:2c…

Hello everyone, after restarting the two APX 120 that we are using, a network loop is caused. If I disconnect the AP´s from the network, everything works fine again. I have replaced all cables and used different ports. They are directly connected to…

I have been handed a task to add a Ubiquiti Nano AP to an existing XG125w network to extend range for an office that's too far away from the XG to get good service. DHCP is provided by Domain controller on the network Goal is for the Unifi AP to be…

Hello, I have a problem and I have no idea where to look, maybe someone can give me a tip. I have an XG115 to which an APX120 is connected. The AP is a member of a MESH and serves as a root AP (5 Ghz). The AP also broadcasts the client SSIDs in 2.4 Ghz…

Dear community, I have the following setup: in a LAN a XG 115 firewall is managing two APX 530 access points. Both access points are in different zones, firewall rules allowing only certain machines in the LAN to transmit data to the connected Wifi…

Is there a way to create a vlan allow connected devices (via AP) bypass firewall? My current SSID in Vlan has a different IP subnet from my home devices. There are times I want to connect devices that totally bypass home firewall. This setup doesn't…

Hey guys. I would love to get your opinion and help on this. I have XG135W and four APX120. With machines connected directly via ethernet has no speed issues. However any wifi devices are experiencing 1/4 of the speed. As a test, I connected google…

I have connected my APX120 to the XG and created a new wireless network, basically same as the default sophos. Bridge to AP LAN. Now I want to add another network with its own subnet, that will have access to my LAN on Port3. So I created a vlan connected…

Just had our [EDIT per rfcat_vk, who pointed out original "APX 30" is not a proper model] APX 320 crash. Solid red light. Power cycled it (unplugged cable, it's on PoE) and it went to an odd green blinking cadence (I think faster than normal), then red…

Hello, I have XG (SFOS 18.0.5 MR-5-Build586) running with Sophos AP. I am trying to get mDNS/AirPlay/AirPrint to work across the wired and wireless networks but it isn't working correctly. Connections aren't stable and repeatedly fail to see devices…

Hi Everyone... I just installed Sophos XG Home on the Mini PC firewall appliance, and also I bought 3 units of Sophos AP15. All AP15 status active and included in the same group. But only 1 AP15 is actively broadcasting the SSID, 2 APs are not.…

Hi, At the moment we are running an UTM/SG310 firewall I am currently preparing a XG310 firewall for our company network. On the SG310 we had 8 AP55C connected. Yesterday I disconnected the SG and instead temporarily connected the XG to our network…

Hi all, Today Im writting because i have a question , my customer has a ACCESS POINT TRICOM , but i want to know if i can configurate the captive portal with this model. Thanks

Hello, I have to upgrade an XG125w that manages AP100s for the wireless network to an XGS136w. Does the new XGS136w model support older AP100s? Is it possible to mix AP100 and APX120 on the new XGS136w? If I want to switch to the more powerful XGS2100…

Hi all I have a challange for you guys! I want to connect 1 Access point (zyxel AC1200) to my Sophos XG for your information: I configured the port whre the access point is connected to like this: i also configured a DHCP Server for this port…

Hello Comm', i bought via eBay two used APX 120. After a normal restart the APs are bricked and do not have any function anymore. The Sophos Flash Tool ( KBA ) do not support APX 120 and the eBay-seller got no informations about the license…

I'm noticing a strange IP address on the network: 192.168.99.76. I can't find 192.168.99 anywhere in the SFOS. But the mystery is even deeper because it appears that packets to this IP are being forwarded to the WAN. I think. But it's confusing... …