Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 5 replies
  • Answers 2 answers
  • Subscribers 42 subscribers
  • Views 11986 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to configure dual wan as link aggregation ?

Pascoal Stephanine

Hi from Brazil !

 

I have two internet links come from my port 4 in separate vlans (VLAN 70 and VLAN 75)

port4.70 (vlan 70) as WAN - 100MB

port4.75 (vlan 75) as WAN - 100MB

 

I can use the two links separately, or set up a load balance, but when I test the link speed on the speedtest, for example, I see the obvious, with each link I get 100 MB.

How do I set up a link aggregation (or other method) so that in the speed test I can reach my 200 MB?



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to Pascoal Stephanine

    Hi,

    a thought you might try. Put a managed switch between the XG and the WAN devices and create a LAG that presents itself as a 200mb/s link to the XG.

    There are downsides to this in no link monitoring or notifications, not able to see which link has failed from the XG.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML