Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 8114 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Traffic Shaping by Host on Subnet

Caleb Vander Ark

I'm attempting to create a traffic shaping policy that restricts all devices on two of my VLANs to a maximum of 6Mbps per host.  Trouble is, when I look at the setup guides for traffic shaping it seems that I'm limited to two options:

1. Apply a traffic shaping policy that limits the entire subnet to a certain bandwidth

or

2. Add all IP addresses on that subnet as individual hosts and then apply traffic shaping to each one.

 

I'd prefer to just create a policy that says "All hosts on subnet X are restricted to 6Mbps of bandwidth each", is something like that even an option?  Or am I misunderstanding something somewhere?



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to lferrara

    lferrara said:
    all the users/IP in that rule will have 6 Mb as total bandwidth available (if the bandwidth usage type is shared). Otherwise select individual.

    Just making sure I understand this right; if I set the bandwidth usage type to individual it would allow each individual IP on that subnet to use up to 6Mbps of bandwidth, correct?

Children
Unfiltered HTML