Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

New Firmware 16.05.8 MR-8 stable?

Hi

I just received the message from the XG 105w that the firmware 16.05.8 MR-8 is available and should be installed. But so far I did not read anything (good or bad) about that version here. Is it recommeded to install the file or are there major issues ?

Thank you

BR

Wolf



This thread was automatically locked due to age.
Parents
  • I just upgraded and am noticing several bugs, and this is the first time I have actually run into issues after an upgrade.

    1) updating some rules to not log requires restart to apply

    2) On IPv4 Lease under Network, I no longer see all my ip's.  I am not sure what kind of logic, but where I normally have around 20 ip's in use I see 4-5.  I know my other devices are connected, but they no longer register.  In fact, I rebooted about 30 min ago and I only see 2 ip's - not even the 2 computers I am using at this moment

    If others have been seeing a similar behavior, please let me know.   This is not enough to rollback yet...

  • Hi Gary,

    from my experience the addresses only show once the devices ask for a new IP lease, not saying good or bad, just a pain when trying to see whether the XG is working correctly.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • Hi Gary,

    from my experience the addresses only show once the devices ask for a new IP lease, not saying good or bad, just a pain when trying to see whether the XG is working correctly.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children