Hello all!
I set up an XG 125 on port 8 (LAN zone) into a vlan at my home office to configure it to be deployed at a remote site. It is currently in bridge mode behind an ASA pair, so I have a 3 port bridge for the INSIDE - 2 ports in ASA zone and 1 in LAN zone - and a 3 port bridge for DMZ - 2 ports in ASA zone, 1 in DMZ zone. I can no longer connect to the web interface. I can SSH into the device on the IP of either the DMZ bridge or the INSIDE bridge, but I cannot browse to either. Also, if I connect to the original port 8 - and give my laptop a static address in that subnet - I can connect to the GUI, but if I change that IP address to the remote office IP space - and subsequently change my laptop to that subnet as well - I can no longer connect to it....except for SSH.
The XG is passing all the traffic it is supposed to pass, passed all testing criteria, and has actually been inline for a few days. I have another install at a different remote site this evening which I am concerned will behave in the same way. Any odeas on how to prevent this for tonight and fix is for the one already in place?
Please let me know if I can give more info to help.
Riz
This thread was automatically locked due to age.
