Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Need Some Hardware Advice for Advanced Home Network

Hello,

I am new to the Sophos XG platform and looking for some advice. Here is my situation:

·         Usage will be in a home. But I work in IT and use my home as a lab / PoC environment, mostly to further my own knowledge about IT systems

·         I am planning to add several IoT devices over the next year

·         Previous two bullets will put me up near 50 devices at times, but I can potentially get creative (e.g., double-NAT some of them so that Sophos XG does not see the IP address on the network)

·         Current Internet connection is 50/10. Looking to upgrade this as soon as I have a more-scalable router/firewall in place

·         AT&T is installing fiber in my neighborhood, and so I want a firewall/router that can scale to at least 1 Gbps. As I understand it, to guarantee decent real-world speeds of 1 Gbps, you should find a router/firewall that states “on paper” that it can push at least twice that – 2 Gbps

·         I have a site-to-site VPN connection with a coworker’s house, to extend the lab/PoC environment when needed. I may also want to set up a site-to-site VPN with Azure soon

·         I use client-to-site VPN (Cisco AnyConnect) and need similar functionality

·         I am interested in the next-gen firewall features of the Sophos XG platform, but I do not necessarily consider them “required”. The most interesting feature would be blocking of ads/malware/phishing sites through web proxy/content filtering. But I do not have these kinds of features today

·         I have a cellular modem, intended for back-up Internet. I have some home security stuff and just trying to ensure that if someone cuts my Internet line, they cannot take out my security system

·         I am not afraid to spend some money (to a point). BUT, this is a home environment

·         I worry about hardware failure and need some amount of protection/assurance against it. If the Internet goes down while I am out of town and my wife cannot watch TV, it is a “Sev A outage” :)

So, to summarize, my must-have features are:

·         Can reliably scale to 1 Gbps (i.e., without packet loss or jitter on real-time communications)

·         Supports site to site VPN

·         Supports client to site VPN

·         Supports failover to a backup Internet connection

·         Rudimentary firewall

Nice-to-have features are:

·         Web proxy/content filtering (removal of ads and malware)

 

I guess my first question is whether the home license can meet all my functionality requirements (e.g., site to site VPN, client to site VPN, etc.).

Second, I am worried that 4 CPU cores + 6 GB of RAM may not scale to 1 Gbps Internet. Has anyone tried this? Are there any test results that show the scalability of the platform?

Third, to protect myself from hardware failure, I am considering running XG as a VM. If I do this, I will place it on dedicated hardware. To avoid any chance of a slowdown due to the hypervisor, I was considering buying a Xeon E5 with six cores (I would assign four to the XG VM, leaving two for the hypervisor). And I would buy the E5 that has 6+ cores and the highest clock speed available. Then I could use the hypervisor features to back up and/or replicate the VM to another host, so that I could quickly recover if there was a problem. I considered running the XG on “bare metal”, but I do not think it would afford me much protection from hardware failure with the home license and I am worried because there is no published hardware compatibility list that I have been able to find.

If I use a VM (or roll my own hardware), how much storage should I plan to give to the XG? I need room for logs, etc. and do not want to cut myself short.

Alternatively, I would not mind buying Sophos XG hardware (the XG 210?), but then I would be spending cash on warranty coverage, or would need to be willing to re-order hardware when a failure occurs.

Finally, I am assuming that the home license of Sophos XG does not allow me to configure a redundant XG for high availability. But let me know if I am mistaken about that… or maybe it’s possible to get a second home license for active/passive high availability?

Again, I do not mind throwing Sophos some cash or buying hardware for what seems to be a high-quality product. Just trying to spend wisely (considering that this is a home environment and not a business) and trying to manage risks.

 

Thanks in advance!

Frank



This thread was automatically locked due to age.