Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 39 subscribers
  • Views 5278 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

can't get my wifi network to work.

B.R.O.

How can I get these to work.  Port 1 is my LAN,  Port 4 is my Wireless

Making the zones, then making firewall rules for traffic to go both ways is not working.

-------------------------------

Port 1 -

VLAN 1

---------------------------------

Port 4

VLAN 19 - wireless radios

VLAN 21 - private wireless

VLAN 254 - guest wireless

------------------------------------

I have wireless cameras on VLAN 20 put I assign that VLAN to Port 1 and have no problems.



This thread was automatically locked due to age.
Parents
  • 0

    Just found this statement.

     

    XG does support only VLAN 1 on the physical port and you cannot change it. Hope they will remove this limitation. If you need another VLAN on the physical port, you have to create VLAN.

     

    That means I need to put VLAN 19,21, and 254 on the VLAN 1 interface.  I will try that and see what happens.

Reply
  • 0

    Just found this statement.

     

    XG does support only VLAN 1 on the physical port and you cannot change it. Hope they will remove this limitation. If you need another VLAN on the physical port, you have to create VLAN.

     

    That means I need to put VLAN 19,21, and 254 on the VLAN 1 interface.  I will try that and see what happens.

Children
Unfiltered HTML